Digital Watchdog DWC-V1362DIR Manuel utilisateur

ABOUT MANUAL

Before installing and using the camera, please read this manual carefully.

Be sure to keep it handy for future reference.

High Resolution

Vandal-Proof Dome Camera

DWC-V1362DIR

08092012

PRECAUTIONS

FCC COMPLIANCE

Do not open or modify.

Do not open the case except during maintenence and installation, for it may be dangerous and can

cause damages.

Do not put objects into the unit.

Keep metal objects and flammable substances from entering the camera.

It can cause fire, short-circuits, or other damages.

Be careful when handling the unit.

To prevent damages, do not drop the camera or subject it to shock or vibration.

Do not install near electric or magnetic fields.

Protect from humidity and dust.

Protect from high temperature.

Be careful when installing near the ceiling of kitchen or a boiler room, as the temperature may rise

to high levels.

Cleaning:

To remove dirt from the case, moisten a soft cloth with a soft detergent solution and wipe.

Mounting Surface:

The material of the mounting surface must be strong enough to support the camera.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against

harmful interference. when the equipment is operated in a residential environment. This equipment

generates, uses, and radiates radio frequency energy; and if it is not installed and used in accordance

with the instruction manual, it may cause harmful interference to radio communications.

WARNING: Changes or modifications are not expressly approved by the manufacturer.

TABLE OF CONTENTS

Introduction

Installation

Troubleshooting

Warranty Information

Memo 22-23

Specifications

Features

Parts and Descriptions

Dimensions

Inside the Box

Mounting the Camera

Connecting to Monitors

Adjusting the Camera Lens

8-12

18-19

20-21

Camera Control Board 16

Adjusting the 3-Axis Gimbal 15

FEATURES*

1/3” CCD

570 TV Lines [B&W], 540 TV Lines [Color]

3.3~12mm Varifocal Auto Iris Lens

100ft Range IR with Intelligent Camera Sync

Electronic Day and Night

3D-DNR (3D Digital Noise Reduction)

D-WDR (Digital Wide Dynamic Range)

HME (Highlight Masking Exposure)

SLC (Side Light Compensation)

Programmable Privacy Zones & Motion Detection

AGC / BLC / AWB

Easy Icon Driven OSD Menu with Built-in Joystick

IP66 Certified (Weatherproof)

Auto Sensing 12VDC/24VAC with Line Lock

Secondary Video-BNC Output

PART & DESCRIPTIONS*

Lens

Video Output Connector - BNC

Power Input Connector

12VDC/ 24VAC Dual Voltage

RS485: BK(D+), WH(D-)

Rubber Band

Black Dome Insert

Bubble Dome

Upper Case

Assembly Screws

T20 M4X16

NPT Plug

Bottom Case

Rubber Pad

Mounting Screws

DIMENSIONS IN MILLIMETERS (IN)*

109.6(4.31”)

103.1(4.06”)

41.3

(1.63”)

6.5(0.26”)

145(5.71”)

117.0(4.61”)

125.0(4.92”)

5.0(0.2”)

4.5(0.18”)

91.0(3.58”)

85.0(3.35”)

INSIDE THE BOX*

Included with V1 Vandal Dome Camera

User Manual

Mounting Template

4 Machine Screws and 4 Dry Wall Anchors

TORX-T20 Hex Key

Double-Sided TORX-T20 Hex Key

L-Key

Secondary Video-BNC Cable

MOUNTING INSTALLATION INSTRUCTIONS*

Pull wires through and make connections.

Refer to page 13. Use mounting template to

mount camera with drywall mounts and

machine screws.

Adjust the camera (pan, tilt, zoom). See

page 14 for details.

Use the joystick to adjust the OSD menu.

See pages 15-17 for details.

Attach the camera housing to the junction

box using the assembly screws.

1 2

3 4

JUNCTION BOX INSTALLATION INSTRUCTIONS*

Check to see all parts are in

the box.

Use the dry wall anchors and

machine screws to mount the

junction box and rubber

gasket to the wall.

Insert wires through the

wall and make the

appropriate connections.

Attach the camera to the

junction box using the

machine screws.

Attach the camera housing

to the junction box using the

assembly screws.

1 2 3

4 5

WALL MOUNT INSTALLATION INSTRUCTIONS*

Check to see all parts are in

the box.

Insert the wires from the

camera through the wall

mount housing.

Attach the camera to

the wall mount housing.

Use the mounting template to

make pilot holes. Use the dry

wall anchors and machine screws

to attach the assembly to the wall.

Attach the camera housing

to the fixture.

1 2 3

4 5

Table des matières

Autres manuels Digital Watchdog Caméra de sécurité

Digital Watchdog

Digital Watchdog MEGApix Snapit DWC-MV421DB Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MVH2I4WV Manuel utilisateur

Digital Watchdog

Digital Watchdog MegaPix Pano DWC-PZ21M69T Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MV72Wi28A Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MB45Wi650TW Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MC352 Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIRW Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MV72Wi4 Manuel utilisateur

Digital Watchdog

Digital Watchdog PowerPix DWC-B6361WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-B5661TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog Star-Light Plus DWC-B6563WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-V7253TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MB45Wi650T Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-PB753WTW Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MVH2I4WV Manuel utilisateur

Digital Watchdog

Digital Watchdog STAR-LIGHT PLUS DWC-B6853WTIRW Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MC753WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-MB75Wi4TW Manuel utilisateur

Digital Watchdog

Digital Watchdog MC355T Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix DWC-MPF5Wi4TW Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-T8553TIR Manuel utilisateur

Digital Watchdog

Digital Watchdog MEGApix Flex DWC-PVX16WW Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-D3563WTIR Manuel utilisateur

Digital Watchdog

Digital Watchdog DWC-B362DIR Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur