Digital-Ally DTM-600 Manuel utilisateur

860-00324-00 Rev B 1

DTM-600

User Guide

860-00324-00 Rev B 2

Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact

the dealer.

Disclaimer

No part of this manual may be copied, reproduced, translated, or distributed in any form or by any means without

prior written consent from Uniview.

The manual may be updated from time to time due to version upgrade or other reasons.

The manual is for reference only. All the statements, information, and suggestions contained herein do not

constitute warranties of any kind, express or implied.

Uniview shall not under any circumstances be liable for any special, consequential, incidental or indirect damages

arising from the use of this manual or Uniview's product, including but not limited to any loss of commercial

profits, losses caused by missing data or documents, and anomalies during product running or information leakage

due to cyber attacks, hacker attacks, or virus attacks.

Safety Precautions

CAUTION!

The default password is used for your first login. To ensure account security, please change the password after

your first login. You are recommended to set a strong password (no less than eight characters).

Before performing operations, be sure to carefully read through and observe safety specifications in this manual.

Screenshots provided in this document are used as examples only and the UI layout varies with versions.

This manual applies to multiple models but the models are not completely listed herein. Refer to actual

products while reading this manual.

Zhejiang Uniview Technologies Co., Ltd. (hereinafter referred to as "Uniview") reserves the right to

modify the content in this manual without prior notice or prompt, but Uniview does not ensure that

this manual is completely error-free.

Subject to uncertain factors such as the physical environment, actual values of data may differ from the

reference values described here. In case of any question or dispute, the right of final interpretation

resides with Uniview.

Follow operation instructions in this manual when using the product. Uniview is not responsible for

problems caused by the violation of the instructions. Thank you for your cooperation.

Environmental Protection

This product has been designed to comply with the requirements on environmental protection. For the proper

storage, use and disposal of this product, national laws and regulations must be observed.

Conventions

The figures, charts or photos in this manual are used for illustration only, which may differ from the

actual product.

This manual applies to multiple models but the models are not completely listed herein. Refer to actual

products while reading this manual.

860-00324-00 Rev B 3

Subject to uncertain factors such as the physical environment, actual values of some data may differ

from the reference values described here. In case of any question or dispute, the right of final

interpretation resides with Uniview.

Follow this manual when using the product. Professional guidance is recommended.

Notational conventions used in this document are described as follows:

Format

Description

Boldface

Indicates buttons, menus, tabs, window names, dialog names, and parameter names. For example, click

OK or select Device Management.

" "

Indicates messages. For example, "Hanging Up" is displayed on the interface.

>

Directs you to go to a multi-level menu. For example, go to Device Management > Add Device. In this

example, Add Device is a submenu under Device Management.

The symbols in the following table may be found in this manual. Carefully follow the instructions

indicated by the symbols to avoid hazardous situations and use the product properly.

Symbol

Description

WARNING!

Contains important safety instructions and indicates situations that could cause bodily injury.

CAUTION!

Means reader be careful and improper operations may cause damage or malfunction to product.

NOTE!

Means useful or supplemental information about the use of product.

860-00324-00 Rev B 4

Contents

1 Application Scope of the Manual

·····························································································

1

2 Product Overview

···············································································································

1

3 Product Appearance

············································································································

1

4 Product Installation

···········································································································

4

5 Local Operations

················································································································

4

5.1 Initial Interface

··············································································································

4

5.2 Main

Interface

···············································································································

5

5.3 Ad

Mode

······················································································································

7

5.4 Mask/Temperature Measurement Interface

········································································

9

5.5 Activation Config

···········································································································

14

5.5.1 Basic Info

···········································································································

15

5.5.2 Device Location

····································································································

16

5.5.3 Network Setting

···································································································

17

5.5.4 User

Management

·································································································

18

5.5.5 Activation

Password

·······························································································

21

5.5.6 Admin

Password

···································································································

22

5.5.7 Authentication Scene

·····························································································

22

5.6 Call Operations on Visual Intercom Face Recognition Terminal

·····················································

24

5.6.1 Call Resident

·······································································································

24

5.6.2 Call Management

Center

·························································································

26

5.7 Door Opening Method

····································································································

27

5.7.1 Face Scan-based Door

Opening

··················································································

27

5.7.2 Password-based Door

Opening

··················································································

29

5.7.3 Card Swiping-based Door

Opening

··············································································

31

5.7.4 QR Code-based Door

Opening

···················································································

31

5.7.5 Remote

Opening

···································································································

31

6 Personnel Management

·····································································································

32

6.1 Personnel Information Input

·····························································································

32

6.1.1 Information Import to the Terminal

············································································

32

6.2 Personnel

Deletion

·········································································································

33

7 Web Operations

···············································································································

33

7.1 Login

·························································································································

33

860-00324-00 Rev B 5

7.1.1

Preparation

·········································································································

33

7.1.2 Logging In to the Web

Interface

·················································································

35

7.2

Photo

·························································································································

36

7.2.1 Photo List

Sorting

··································································································

37

7.2.2 Total Capacity/Available

Capacity

···············································································

37

7.2.1 Photo Naming

Rules

·······························································································

37

7.2.2 Refreshing the Photo Library

····················································································

38

7.2.3 Exporting Records

·································································································

38

7.2.4 Exporting Photos

··································································································

38

7.2.5 Deleting a

Photo

···································································································

38

7.2.6 Exporting and Deleting Photos

··················································································

39

7.3 Parameter

Configuration

··································································································

40

7.3.1 Common

············································································································

40

7.3.2

Network

·············································································································

58

7.3.3

Image

················································································································

58

7.3.4

Intelligent

···········································································································

67

7.3.5 Events

···············································································································

83

7.3.6

Storage

··············································································································

86

7.3.7 Security

·············································································································

86

7.3.8 System

··············································································································

88

8 Live View

·······················································································································

91

9 FAQs

·····························································································································

92

860-00324-00 Rev B 6

1 Application Scope of the Manual

Table1-1 Application Scope of the Manual

Model

Name

ThermoVu DTM-600

Face Recognition Access Control Terminal with temperature module

2 Product Overview

Visual intercom face recognition terminal ("the face recognition terminal" for short) is a face

recognition access control product featuring high performance and high reliability. The UNV face

recognition technology is perfectly integrated into the access control device, which relies on deep

learning algorithm, to support face authentication to open the door and achieve precise control of

human. Moreover, using remote control to open the door is also supported via indoor monitor. And it

can be widely applied to the scenarios of building systems, such as smart communities, public security,

parks and other important areas.

3 Product Appearance

The figure below shows the structure of the device. The actual device shall prevail.

OET-213H

Figure3-2 Device Structure

860-00324-00 Rev B 7

1.Light supplement lamp 1

2.Camera 1

3. Infrared light supplement lamp

4.Camera 2

5.Light supplement lamp 2

6.Display screen

7. Pass-through indicator

8.Microphone

9. Card reading area

10.Loudspaker

11.Reset

12.USB2.0

13.Network interface

14.Power input (DC 12V±25%)

15.20-pin interface

16.Tamper proof button

860-00324-00 Rev B 8

4 Product Installation

Installation of OET-213H

For the wiring and installation of the device, refer to the ET-B31H-M@B Face Recognition Access Control Terminal

Quick Guide.

5 Local Operations

5.1 Initial Interface

When the face recognition terminal is used for the first time or the factory defaults are restored, users need to

set the activation password, which is used to log in to the Activation Config interface.

NOTE!

⚫The password must contain at least eight characters (including at least two of the following types: upper case

letters, lower case letters, digits, underscores, and hyphens).

⚫The activation password is consistent with the password for the admin to log in to the Web interface. If the

activation password is changed, use the new password to log in to t h e Web interfa ce .

After the activation password is configured, the main inter face of the visual intercom face recognition ter

minal is displayed. If the activation password needs to be changed later, refer to " Activation Password " to

change the password.

Figure5-1 Activation Password Configuration Interface

860-00324-00 Rev B 9

5.2 Main Interface

The main interface displayed on the face recognition terminal varies with the device type.See Device Info .

Figure5-2 Main Interface (Video Intercom Mode)

Test

No.

Description

1

Displays the current date, time, and connection status of different services.

indicates the following items from left to right:

⚫Whether to enable the face scan mode

⚫Whether an ID card reader is connected properly

⚫Whether server 1 is online

⚫Whether server 2 is online

NOTE!

An icon marked with indicates "No".

2

Total：total number of detected people.

Normal：Number of people with normal temperature

This interface is only displayed when the temperature measurement function is enabled. For detailed

operation description, see “Advanced Setting”.

3

Displays the photo and name of an identified person in the library. Refer to Recognition Result Displayto

enable the face recognition terminal to display one or more registered face pictures.

When Multiple Faces is selected, information about the latest person identified successfully, is displayed

on the left of the screen. The interface can display information about five recent persons identified

successfully at most.

860-00324-00 Rev B 10

4

Calls a resident. For detailed operation description, see "Call Resident".

Enters a password to open the door. For detailed operation description, see

"Password-based Door Opening".

Calls the management center. For detailed operation description, see "Call

Management Center".

QR code used for door opening. For detailed operations, see "QR Code-based

Door Opening".

5

Title bar, which can be defined by users. For detailed operations, see "Custom Logo and Prompt".

6

Logo bar, which can be defined by users. For detailed operations, see "Custom Logo and Prompt".

7

Displays the identification result (such as identified successfully or unregistered person), authentication

mode (such as face scan or card swiping), and other information.

8

Displays the number of people in the employee library and that in the visitor library.

9

Status bar at the bottom

Displays the device IP address, real-time temperature, preset minimum temperature, ambient

temperature, and match time.

Digital-Ally DTM-600 Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques