DIEBOLD NIXDORF K-two Manuel utilisateur

K-two with card dispenser

Installation manual

Oktober 2019

01750339347A

All rights, including rights of translation, reproduction by printing, copying or similar methods,

in part or in whole, are reserved.

the grant of a patent or the registration of a utility model. Subject to availability and technical

modifications.

All names of hardware and software products mentioned in this manual are trade names

and/or trademarks of their respective manufactures.

Contents

1Scope of document.........................................................................................1

2Further documentation...................................................................................1

3Symbols...........................................................................................................2

4Important Notes ..............................................................................................3

5Scope of delivery............................................................................................5

6Full view...........................................................................................................8

7Installation.......................................................................................................9

7.1 Safety Note.......................................................................................................9

7.2 Tools needed....................................................................................................9

8Dimensions ...................................................................................................29

9Service area...................................................................................................32

9.1 Block diagram.................................................................................................33

10 Recycling.......................................................................................................34

1 Scope of document

This manual contains important information about the installation requirements, connection

and maintenance of the device.

CAUTION

Installation and connection of this device may only be carried out by

authorized specialist personnel.

The safety instructions given in this document must be strictly followed when operating and

installing the device.

If you have any doubts or questions, please contact your Diebold Nixdorf contract partner at

any time.

2 Further documentation

K-two installation manual Diebold Nixdorf Intranet/Internet 01750299889

K-two user manual (D-EN) Diebold Nixdorf Intranet/Internet 01750312066

K-two service manual (D-EN) Diebold Nixdorf Intranet

3 Symbols

DANGER

This warning note describes a hazard with a high degree of risk, which, if not

avoided, will result in death or grave bodily injury.

WARNING

This warning note describes a

hazard with a medium degree of risk, which, if

not avoided, will result in death or grave bodily injury.

CAUTION

This warning note describes a hazard with a low degree of risk, which, if not

avoided, will result in death or grave bodily injury.

NOTICE

This note provides application tips and information that help prevent errors

and material damage.

4 Important Notes

Terminals supplied by Diebold Nixdorf comply with the respective safety regulations for data-

processing installations and information technology installations, including electrical office

equipment for use within an office environment.

WARNING

Whenever work of any kind is done on the device, as well as when data ca-

bles are plugged and unplugged, the device must be completely discon-

nected from the line voltage.

Terminals may only be installed and repaired by authorized technicians.

•

Unauthorized opening of the housing or inexpert repairs can result not only in considera-

ble personal danger, but will also invalidate your warranty and liability protection.

•

Always consult the enclosed documentation before doing any work with this terminal.

•

If this terminal is brought from a cold environment into a heated place of business, con-

densation may occur. Before operation, the terminal must be completely dry. Therefore,

an acclimatization period of at least two hours must be adhered too.

•

Always lay the supply leads and cables in such a way that they cannot be stepped on or

tripped over.

•

Exchange damaged cables immediately.

•

In order to completely disconnect the terminal from the power source use the separator in

the fuse box\building installation.

•

Make sure that no objects (such as paper clips) can reach the interior of the terminal,

since electrical shocks or short-circuits could result.

•

Ensure that the K-two receives adequate ventilation to avoid overheating.

•

During an electrical storm, data cables should not be plugged in or being unplugged.

•

Keep the terminal away from vibrations, dust, humidity and heat.

•

Ensure that used parts are disposed of in an environmentally friendly manner.

•

In case of an accident (such as a damaged housing, entry of liquids or foreign objects),

switch the terminal off and use the separator to completely remove the terminal from

power.

•

The terminal and other information technology hardware should only be connected to

electrical supply networks with a separate protective earth wire (PE). This type of electri-

cal supply network is referred to as a TN-S network. Do not use PEN conductors. Also

follow the recommendations set forth in DIN VDE 0100 Part 540, Appendix C2 as well as

EN50174-2, §5.4.3 (www.DIN.de). This will help prevent malfunctions.

•

National Electrical Code ANSI/NFPA 70-2005

•

Always keep the ventilation slots free of obstruction to ensure adequate air circulation

and avoid overheating.

•

Transport the terminal only in its original packaging (to protect it against knocks and

bumps).

•

If a lithium battery is supplied with the terminal, ensure that the battery is replaced with an

equivalent type. Otherwise there is danger of explosion! Lithium batteries may only be re-

placed with identical types or other types recommended by the manufacturer.

•

Batteries must be disposed of according to local regulations on the disposal of special

waste.

5 Scope of delivery

NOTICE

Check whether the serial number of the delivery units is the same as the

serial number of the K-two.

Delivery unit

K-two

K-two pillar (base plate (1) optional)

Delivery Unit

Card dispenser slot

Power supply

Cover

Power supply cable

Card dispenser

Covers for pillar

Housing card dispenser

Cable kit

Autres manuels pour K-two

Table des matières

Autres manuels DIEBOLD NIXDORF Terminal tactile

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN 200 Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE/M-III Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE/iSCAN EASY eXpress Plus Manuel d'utilisation et d'entretien

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE A1150 Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE /iSCAN EASY Non Cash Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE M1350 Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN 470 Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE /iPOS plus XL Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF RP-04 Feuille d'instructions

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE /iPOS plus SL Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE /iSCAN EASY eXpress+ Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE A Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN 200 Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF DN 250 Series Manuel utilisateur

DIEBOLD NIXDORF

DIEBOLD NIXDORF BEETLE /XS Manuel utilisateur

Manuels Terminal tactile populaires d'autres marques

Wincor Nixdorf

Wincor Nixdorf iPOS plus Advanced Manuel utilisateur

Ingenico

Ingenico AXIUM EX4000 Manuel utilisateur

Heisei Electronics

Heisei Electronics Q-POS 815 Manuel utilisateur

Amano

Amano MTX-15 Manuel utilisateur

FLOWBIRD

FLOWBIRD CWT Compact Touch Manuel utilisateur

Demco

Demco SP7 Manuel utilisateur

Lathem

Lathem PC600 Series Manuel utilisateur

Partner

Partner MF-2352 Manuel utilisateur

NCR

NCR RealPOS 7460-2 Manuel

Simrad

Simrad MS50 Instructions de montage

Unitech

Unitech MR350 MKII Guide de démarrage rapide

Jungheinrich

Jungheinrich WMT 210 Manuel utilisateur

Motorola

Motorola MTP850 Manuel utilisateur

YASKAWA

YASKAWA 62H-MDC0 Manuel utilisateur

MVG industries

MVG industries NeptuLink Manuel utilisateur

Price Industries Limited

Price Industries Limited FDC Manuel d'instructions

Honeywell

Honeywell TemaKey Manuel utilisateur

EBN

EBN BPC65-B-A16G Manuel utilisateur