Dialog 4G Wingle Manuel utilisateur

Table des matières

Autres manuels Dialog Matériel informatique

Dialog

Dialog DA16200 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

About Dialog 4G Wingle

1. USB Connector

2. Data transfer LED indicator

3. Signal LED indicator

It indicates the different status of the Wingle as below：

Data transfer LED indicator

Green blinking means the Wingle is transferring data

Signal LED indicator

Green means the Wingle is connected to 4G or 3G network.

Red means the Wingle is with NO SIM card or you have inserted the wrong

operator's SIM card and your network is locked.

Red blinking means the Wingle is searching network.

Inserting the SIM Card

1. Slide the cover to remove it from the Wingle.

2. Insert the SIM card into the card slot as below.

3. Replace the cover and slide it into place.

Note:

DO NOT remove the SIM card when the Wingle is plugging in the PC as this may

damage the card and the Wingle.

How to use Dialog 4G Wingle with Network

Step1: insert the SIM card

Step2: plug the Wingle into the USB ports of your PC with right position

as blow.

Step3: Wait for a few seconds until the signal indicator light turn to green which

means the Wingle is connected to the network.

Disconnecting from network connection

Unplug the Wingle from the computer.

Note：

When unplugging the device from the computer, remove it gently to protect the

Wingle and the USB port of the computer.

Logging into the Device Management website

1. Make sure the end-user device is connected to the Wingle.

2. Open the browser, enter http://192.168.0.1 in the address box.

3. Enter the password, and click “login”. The administrator has the right to check and

modify configuration permission.

Note:

The default User Name and Password is admin.

Trouble Shooting

If you are having trouble with the Wingle, follow these steps:

1. Log into the device management website and click the help icon on the top right

corner for answers to frequently asked questions.

2. If the Wingle is not responsive, reboot it by pressing the ‘Reset’ button for about 5

seconds to restore the Wingle to factory settings

Note: All figures above are for reference only.

Note:

1. The Modem product shall only be connected using a USB interface of version

USB2.0.

2. The maximum operating temperature of the Wingle is 35℃.

3. Frequency information.