dg_usb3.0_dev_ip_demo_instruction_en.doc
15 May 2015 Page 1
USB3D
USB3DUSB3D
USB3D-
--
-IP (USB3.0
IP (USB3.0IP (USB3.0
IP (USB3.0-
--
-Device function IP) demo manua
Device function IP) demo manuaDevice function IP) demo manua
Device function IP) demo manua
Rev 1.3E / 15 May, 2015
This document describes USB3D-IP (USB3.0 device function IP-Core) eva uation procedure using A tera
eva uation board (Cyc oneIV GX board, Cyc oneVE board, and ArriaV GX starter board) or Xi inx
eva uation board (SP605, ML605, KC705, and ZC706 board) and USB3.0 adapter board with eva uation
sof-fi e or bit-fi e
1
11
1.
..
.Eva uation Environment
Eva uation EnvironmentEva uation Environment
Eva uation Environment
This demo design operates under fo owing environment shown at
Figure 1.
..
.
1
11
1-
--
-1
11
1A tera Environment
A tera EnvironmentA tera Environment
A tera Environment
For A tera USB3.0 Device-IP eva uation, user must arrange fo owing environment.
•A tera eva uation board (Cyc one IV GX board in this examp e)
•USB3.0 adapter board from DesignGateway [Part# AB08-USB3HSMC]
•USB3.0 A to A cab e attached with adapter board.
•A tera sof-fi e down oad too (programmer) and NiosII conso e.
•Host PC with USB3.0 port. (PCIe extension USB3.0 host card is a so avai ab e, however, such PCIe
extension host card is sensitive to ana og characteristics such as error occurrence at some PCIe s ot
position. And PCIe extension host card cannot provide enough transfer performance when PCIe
interface is 1- ane and not GEN2 but GEN1 speed because GEN1 1- ane PCIe I/F imits its
performance to 2.5Gbps=200Mbyte/s at maximum.)
Figure
Figure Figure
Figure 1
11
1: A tera demo environment for USB3D
: A tera demo environment for USB3D: A tera demo environment for USB3D
: A tera demo environment for USB3D-
--
-IP eva uation
IP eva uationIP eva uation
IP eva uation
(Notes) Eva uation sof-fi e has 1-hour time imit operation after FPGA configuration.
