DFI NS35-TC Manuel utilisateur

NS35-TC

NS35-TL

Rev.A+

System Board User’s Manual

Carte Mère Manuel Pour Utilisateur

System-Platine Benutzerhandbuch

Tablero Electrónico del Sistema Manual del Usuario

935-NS3502-100

60500226

This publication contains information that is protected by copyright.

No part of it may be reproduced in any form or by any means or

used to make any transformation/adaptation without the prior

written permission from the copyright holders.

This publication is provided for informational purposes only. The

manufacturer makes no representations or warranties with respect to

the contents or use of this manual and specifically disclaims any

express or implied warranties of merchantability or fitness for any

particular purpose.The user will assume the entire risk of the use or

the results of the use of this document. Further, the manufacturer

reserves the right to revise this publication and make changes to its

contents at any time, without obligation to notify any person or

entity of such revisions or changes.

Trademarks

Windows®98, Windows®98 SE, Windows®ME, Windows®2000,

Windows NT®4.0 and Windows®XP are registered trademarks of

Microsoft Corporation. Intel®and Pentium®4 are registered

trademarks of Intel Corporation. SiS®is a registered trademark of

Silicon Integrated Systems Corporation. Award is a registered

trademark of Award Software, Inc. Other trademarks and registered

trademarks of products appearing in this manual are the properties

of their respective holders.

Caution

To avoid damage to the system:

• Use the correct AC input voltage range.....

To reduce the risk of electric shock:

• Unplug the power cord before removing the system chassis

cover for installation or servicing. After installation or servicing,

cover the system chassis before plugging the power cord.

Battery:

• Danger of explosion if battery incorrectly replaced.

• Replace only with the same or equivalent type recommend

the manufacturer.

• Dispose of used batteries according to the battery

manufacturer’s

instructions.

Joystick or MIDI port:

• Do not use any joystick or MIDI device that requires more than

10A current at 5V DC. There is a risk of fire for devices that

exceed this limit.

FCC and DOC Statement on Class B

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a residential

installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio TV technician for

help.

Notice:

1. The changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority

to operate the equipment.

2. Shielded interface cables must be used in order to comply with

the emission limits.

Quick Setup Guide

Quick Setup

Guide

Table of Contents

Chapter 1

Quick Setup Guide.............................................

Chapter 2

English......................................................................

Chapter 3

Français (French).................................................

Chapter 4

Deutsch (German)................................................

Chapter 5

Español (Spanish)..................................................

Note:

This user’s manual is for the NS35-TC and NS35-TL system boards.

The only difference between these boards is the NS35-TL system

board supports onboard LAN.

Quick Setup Guide

Quick Setup

Guide

Chapter 1 - Quick Setup Guide

Table of Contents

1.1 System Board Layout..................................................................................................

1.2 Jumpers.....................................................................................................................................

1.3 Ports and Connectors................................................................................................

1.4 Award BIOS Setup Utility.......................................................................................

Quick Setup Guide

Quick Setup

Guide

1.1 System Board Layout

NS35-TC

Clear CMOS (JP5)

FDD (J22)

SiS

650GX

SiS

962L

Mouse

COM 1 (J4)

Parallel (J5)

ATX Power

10 9

Front audio

(J10)

AC’97

Wake-On-Ring

(J19)

3.3VSB standby

for PCI (JP6) PCI standby

power LED

11 15

USB5&6(J25)

BIOS

CPU fan

(J1)

DIMM

standby

power

LED

PCI 1 Slot

PCI 2 Slot

PCI 3 Slot

CNR Slot

Socket 478

AGP Slot

+12V power

(ATXP1)

I/O

chip

System fan

(J12)

IrDA (J20)

PWR-LED

HD-LED

J27

ATX-SW G-LED

G-SW

SPEAKER

Battery

RESET

DDR SDRAM

DIMM 1

DDR SDRAM

DIMM 2

Primary IDE (J18)

Seconary IDE (J17)

VGA (J7)

Square denotes pin 1

Wake-On-LAN (J23)

USB 1

USB 2

Line-

out

Line-

Mic-

CN1

CN3

1615

CD-in

(J16)

Game/MIDI

(J13)

S/PDIF-out (J28)

AUX-in

(J15)

Power select

for USB 5/6 (JP3)

10 9

COM 2 (J6)

USB 3

USB 4

Quick Setup Guide

Quick Setup

Guide

Note:

The illustrations on the following pages are based on the system

board that supports onboard LAN.

NS35-TL

(Supports onboard LAN)

Clear CMOS (JP5)

FDD (J22)

SiS

650GX

SiS

962L

Mouse

LAN

COM 1 (J4)

Parallel (J5)

ATX Power

10 9

Front audio

(J10)

AC’97

Wake-On-Ring

(J19)

3.3VSB standby

for PCI (JP6) PCI standby

power LED

11 15

USB5&6(J25)

BIOS

CPU fan

(J1)

DIMM

standby

power

LED

USB 3

USB 4

PCI 1 Slot

PCI 2 Slot

PCI 3 Slot

CNR Slot

Socket 478

AGP Slot

+12V power

(ATXP1)

I/O

chip

System fan

(J12)

IrDA (J20)

PWR-LED

HD-LED

J27

ATX-SW G-LED

G-SW

SPEAKER

Battery

RESET

DDR SDRAM

DIMM 1

DDR SDRAM

DIMM 2

Primary IDE (J18)

Seconary IDE (J17)

VGA (J7)

Square denotes pin 1

Wake-On-LAN (J23)

USB 1

USB 2

Line-

out

Line-

Mic-

CN1

CN3

1615

Phy

CD-in

(J16)

Game/MIDI

(J13)

S/PDIF-out (J28)

AUX-in

(J15)

Power select

for USB 5/6 (JP3)

10 9

COM 2 (J6)

Quick Setup Guide

Quick Setup

Guide

Warning:

Electrostatic discharge (ESD) can damage your system board,

processor, disk drives, add-in boards, and other components. Perform

the upgrade instruction procedures described at an ESD workstation

only. If such a station is not available, you can provide some ESD

protection by wearing an antistatic wrist strap and attaching it to a

metal part of the system chassis. If a wrist strap is unavailable,

establish and maintain contact with the system chassis throughout

any procedures requiring ESD protection.

Quick Setup Guide

Quick Setup

Guide

1.2.1 Clear CMOS Data - JP5

1.2 Jumpers

1-2 On:

Clear CMOS Data

2-3 On: Normal

(default)

Clear CMOS

(JP5)

1.2.2 Jumper Settings for Selecting the USB 5/6 Power

Power select

for USB 5/6 (JP3)

123

1-2 On: Disabled - VCC

123

2-3 On: Enabled -

5V_DUL

(default)

If you wish to use the Wake-On-USB Keyboard/Mouse function, make sure

this jumper is set to Enabled. “USB Port Wake Up Control” (“PM Wake Up

Events” field) in the Power Management Setup submenu of the BIOS must

also be set to Enabled.

Quick Setup Guide

Quick Setup

Guide

1.3 Ports and Connectors

1.3.1 PS/2 Mouse and PS/2 Keyboard Ports

1.3.2 Serial Port

The Wake-On-PS/2 Keyboard/

Mouse function, when enabled,

allows a PS/2 keyboard or

PS/2 mouse to wake up a

system from the S3/S4/S5 state.

Make sure to turn off your

computer prior to connecting or

disconnecting a mouse or

keyboard. Failure to do so may

damage the system board.

PS/2 Mouse

PS/2 Keyboard

10 9

COM 2 (J6)

COM 1

Serial Port

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels DFI Carte mère

DFI

DFI LANPARTY UT X58 t3eh8 Manuel utilisateur

DFI

DFI PE11-TC Manuel utilisateur

DFI

DFI P2XBL D+ Manuel utilisateur

DFI

DFI M8M051 Manuel utilisateur

DFI

DFI CM100-C Manuel utilisateur

DFI

DFI KM400A-MLV Manuel utilisateur

DFI

DFI AD75 Manuel utilisateur

DFI

DFI K6BV3+ Manuel utilisateur

DFI

DFI AD70-SC Manuel utilisateur

DFI

DFI nF4 Ultra-DAGF Manuel utilisateur

DFI

DFI SB331-IPM Manuel utilisateur

DFI

DFI CMS632-W480E Manuel utilisateur

DFI

DFI 915GM-MIGF Manuel utilisateur

DFI

DFI NB71-SC Manuel utilisateur

DFI

DFI HD636-H81CS Manuel utilisateur

DFI

DFI Qseven Q7A-551 Manuel utilisateur

DFI

DFI CS170-Q370 Manuel utilisateur

DFI

DFI 915G-TMGF Manuel utilisateur

DFI

DFI WB72-SC Manuel utilisateur

DFI

DFI PT332-DRM Manuel utilisateur

DFI

DFI AL701 Manuel utilisateur

DFI

DFI CB60-ZX Manuel utilisateur

DFI

DFI HD332-H81 Manuel utilisateur

DFI

DFI G586IPV Manuel utilisateur

Manuels Carte mère populaires d'autres marques

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur