DESi Utopic 2 Manuel utilisateur
USER MANUAL
Wireless Motorized Cylinder
!
GENERAL INFORMATIONS and WARNINGS
- We recommend you to put the keys to an accessible place (like car, bag etc.) in an emergancy
condition.
- If there is any problem with door or locking mechanism, first of all, those problems need to be
solved. Door's mechanical parts and locking mechanism should be working properly.
- Replace the batteries, if there is a battery warning. RECYCLE EMPTY BATTERIES!
- All the system need to be protected from water, direct sunlight and shocks.
- Place the batteries after installation of the system to the door. If the batteries are placed before
the installation, auto-rotating parts may cause injuries. WATCH YOUR FINGERS!
- For some doors, even if you remove cylinder screw, you cannot remove cylinder due to cramped
installation of defender. If this is the situation, follow the instructions below:
a- Untighten screws of cylinder defender (don’t remove the screws)
b- Remove cylinder screw and take out the old cylinder.
c- Install the device after disassemble the motozied part from the cylinder. (see p. 4 and 5)
2
3
Controlling Options and Compatible Accessories
Wireless Fingerprint Readers
Wireless Keypad
Wireless Auto-Locking Module
Wireless Home Automation Interface
Remote Controllers
Remote Access Module
BOX CONTENT
(May vary according to model number)
1x Wireless Motorized Cylinder (with keys)
5x Alkaline Batteries
1x Installation screw and Hex key
User Manual
1. FEATURES OF THE DEVICE
Structure
Engraved Aluminum, ABS Plastic, Zamak
Cylinder Length
(outside) 31 mm x 37 mm (inside)
Inside part can extensile up to 43 mm
(Different cylinder lengths are available)
Batteries and Battery Life
5x AA size 1,5 V Alkaline or Lithium Batteries
On a 2 turns lock, with 10 operations per day;
300 days (if RF or Bluetooth is enabled)
200 days (if RF and Bluetooth are enabled)
Communication Capability
Bluetooth Low Energy
ISM RF 434 Mhz
4
2. PARTS OF DEVICE and INSTALLATION
Cylinder
Handle
Handle Screw
Hex Screw
The hole
for hex key
DEMOUNTING OF MOTOR AND CYLINDER
- Open “handle screw” and remove the handle by pulling.
- Remove the batteries.
- Rotate “hex screw” to counter-clock wise by using the
hex key out of the box. You will see the cylinder will be
disassembled from the motorized part.
To assemble two parts, combine cylinder and motorized
part in a proper way and rotate hex screw to clock wise.
Metal Extending Parts
(used if needed)
Plastic Cover Cover Spring
5
Up to 6 mm
EXTENDING INSIDE PART OF THE CYLINDER (if needed)
If the door thickness is not suitable to the cylinder of the device, inside part of the
cylinder may be extended up to 6 mm by 2 mm steps.
To extend the cylinder’s inside part, follow the instructions below:
- Open “handle screw” and remove the handle by pulling.
- Remove the batteries.
- Rotate “hex screw” to counter-clock wise by using the hex key out of the box till the
motorized part is disassembled from the cylinder.
- Add 2 mm metal extending parts as needed.
- Assemble cylinder and motorized part and rotate hex screw to clock wise direction.
- Install the batteries and check the device if it is working properly or not.
26 10 32
26 10 38
1.STEP
Remove
existing
cylinder.
2. STEP
Install
motorized
cylinder and
tighten
the screw
That’s
it!
INSTALLATION OF MOTORIZED CYLINDER
6
MOBILE APPLICATION
In this section, you can find details about usage of
Mobile Application
If there is no controller with your motorized cylinder and
if you enroll your smart phone as first controller,
it will be master controller of your motorized cylinder.
Before you use your motorized cylinder, you should adjust it
properly according to the lock which motorized
cylinder will work together. First, you should adjust
“direction of locking” and than
“number of rotation” (see page 50 and 51)
If you want to change the master controller of motorized
cylinder, check “HOW TO RESET MOTORIZED CYLINDER”
topic on last page.
To use all available features of your device, we recommend you to use
a smartphone as master controller.
7
- After long warning tone, a short warning tone will be heart. Now confirm the pop-up on application and device
recognition process will start. If the matching is successful, you will hear 2 short tones from motorized cylinder and your
device will be master controller of motorized cylinder.
3.1. ENROLLING A MOBILE PHONE AS MASTER CONTROLLER
- Search “Desi Utopic” on stores. Download, install and run the application.
- Choose desired language and define a password.
- Touch “+” on the top left corner to see the list of Utopic motorized cylinders around.
- Touch to UTOPIC line and enter a name for your device and touch to green tick.
- A confirmation pop-up will appear. Before confirming, press/hold “set/reset button”
on motorized cylinder till a long warning tone is heart. After that, a short warning tone
will be heart, than you can release button.
Set / Reset
Button
8
3.2. APPLICATION SETTINGS
If you touch to menu button on the top right corner when it is not connected to motorized cylinder, you will reach to
settings menu of application. Related menu items are as follows:
PASSWORD: You can disable, enable or change the password of application.
LANGUAGES: You can change language of the application.
APPLICATION SETTINGS: You can disable / enable auto-connection
feature which connects to a known motorized cylinder around as soon as
the application is lunched.
APPLICATION INFO: You can see the version of installed application.
Menu
Button
9
3.3. MOTORIZED CYLINDER SETTINGS / ADMINISTRATION MENU
If you touch to menu button on the top right corner when the application is connected to motorized cylinder as master
controller, you will reach to settings menu of connected motorized cylinder. You can change settings of your motorized
cylinder and perform administrative activities via this menu.
Before using your smart cylinder, “locking way” and “number of turns” settings should be adjusted properly. Otherwise, it
would damage the device’s mechanical structure. Those two settings is written in . Please check next 2 pages.RED
Related menu has 4 tabs; Device Info, Knob Settings, Users, Reports
3.3.1. DEVICE INFO TAB
In this tab, you can see following information:
Device Name
Device Type
Device’s Firmware Version
Battery Level
Number of Enrolled Controllers
Number of Operations (Locking or unlocking)
If you want to delete connected device from your mobile application,
touch to “Delete Device” button in this menu.
Menu
Button
Device Info Tab
10
3.3.2. KNOB SETTINGS TAB
In this tab, there are following menu items:
BUZZER OF KNOB: You can enable / disable activation sounds coming
from motorized cylinder.
NIGHT MODE AVAILABILITY: Night mode is a security option which
temporarily disables all controllers of motorized cylinder. In this way,
the door can only be opened by knob or the key. If this feature is enabled,
when you rotate your motorized cylinder through locking way 2 times,
the device will shift to night mode till you rotate the know or key through
unlocking way. On this menu item, you can enable / disable capability to
shift night mode. For shifting to night mode, Semi-Automatic Mode should be enabled.
SEMI-AUTOMATIC MODE: Your device has a semi-automatic feature which senses the knob / key rotation and
continue to rotate automatically. On this menu item, you can enable / disable this feature.
INVERT LOCKING WAY: You may need to change the direction of locking according to the door’s way which you will use
your motorized cylinder. You can invert locking way of device on this menut item.
Menu
Button
Knob Settings
Tab
Autres manuels pour Utopic 2
1
Table des matières
Autres manuels DESi Serrure de porte
