Denford F1 Manuel utilisateur
User Guide
Denford F1 Race System
Page 2
1: Contact Information
Address: Denford Limited,
Armytage Road,
Brighouse,
West Yorkshire,
HD6 1QF,
UK.
Telephone: General Enquiries 01484 728000
Fax: 01484 728100
Technical Support: Visit Denford Technical Forum at www.denfordata.com/bb
Telephone Denford Customer Services: 01484 728000
Monday to Monday to Thursday 8.30am - 4.30pm GMT
Friday 8.30am - 2.00pm GMT
For international dialling: +44 and remove rst 0 in each city code
Page 3
1: Contact Information .............................................................................................2
2: Contents ..............................................................................................................3
3: Warning Notices ..................................................................................................4
4: Unpacking the Denford F1 Race System ............................................................5
5: Identifying the Race System Equipment..............................................................6
Sector Gate......................................................7
Sector Gate - Track Sensors............................8
6: Positioning the Equipment Start and Finish Gates.....................................9
Sector Gate.....................................................10
7: Connecting up the Race System
Start Gate........................................................11
Finish Gate......................................................12
Sector Gate.....................................................13
8: Powering up and testing the Race System..........................................................14
9: Race System operation:
Automatic Mode..............................................................15
Manual Mode..................................................................16
Reaction Time Mode.......................................................17
Connecting Start Gate over a network............................18
Race Screen...................................................................21
Administration Screens...................................................22
The Leaderboard Screen................................................24
The Results File..............................................................25
Connecting Using WiFi...................................................26
The Generic Results File................................................28
10: Safe Operation of the Denford Race Track & Race System..............................29
On-line Technical Forum Details..............................................................................30
Notes .......................................................................................................................
2: Contents
Page 4
3: Warning Notices
Warranty Disclaimer.
The Warranty on your Denford Race Track & Race System will be invalidated if any
modications are undertaken that are not authorised by Denford Ltd.
Maintenance Disclaimer.
Always obtain permission from the person responsible for electrical equipment in your
establishment before accessing the electrical control panels housed in the Start and Stop
Gates if supplied. All work must be carried out by personnel suitably qualied to remove the
access covers to the electrical systems. Denford Limited cannot accept responsibility for
any damage, injury and/or loss that may occur through incorrect electrical practices.
Safe operation of the Denford F1 Race Track & Race System is outlined on page 24 of this
booklet.
Use of the Denford Race Track & Race System for any purpose other
than those for which it is designed may result in injury, and may also
invalidate the warranty.
Page 5
Standard Denford
F1 Race System
Denford F1 Race System
with Sector Timing Gate
Both the standard Denford F1 Race System and the Denford F1 Race System with a Sector
Timing Gate are supplied packed in either a cardboard box as standard or a ight case which
can be ordered as an option.
The race system components are protected by bespoke foam packing inside both the box
and the ight case. The foam packing is re-usable and should be retained to re-pack the
Race System after use.
4: Unpacking the Denford F1 Race
Page 6
5: Identifying the Denford F1 Race System
equipment.
A
B
C
D E F
GH
J
K
A..............Start Gate (1-Off)
B..............Finish Gate (1-Off)
C..............Start Box (2-Off)
D..............Race Trigger (1-Off Red)
E..............Race Trigger (1-Off Black)
The standard Denford F1 Race System consists of the following equipment:
F...............Eithernet Cable 25M (1-Off)
G..............90 Deg Jack Plug Cable-Short (2-Off)
H..............Jack Plug Cable-Long (1-Off)
J...............Power Pack (1-Off)
K..............Power Lead (1-Off)
Page 7
5: Identifying the optional Sector Timing
Gate equipment
When the Denford F1 Race Track and Race System are ordered together from the
factory with the optional Sector Timing Gate the following loose additional equipment
will be supplied.
W..............Sector Timing Gate (1-Off)
X...............Eithernet Cable 25M (1-Off)
Y................90 Deg Jack Plug Cable-Short (2-Off)
Z................Jack Plug Cable-Long (1-Off)
W
X
Y
Z
Page 8
When the Denford F1 Sector Timing Gate System is purchased separately the equipment
identied on page 7 will be supplied along with these additional items shown below. These
are the track sensors and must be tted to the special Sector Timing Track Section.
5: Identifying the optional Sector Timing
Gate equipment.
The receiver sensors on the red mounting discs are tted to the two outer (red)
aluminium sections and the emitter sensor is mounted from underneath the track through
the white track board into the centre (silver) aluminium section.
The receiver sensors are tted and secured into the red aluminium sections as shown
with the green circuit board facing upwards. The emitter sensor can be tted either way
around as long as the xing holes align.
Page 9
The Start Gate:
This should be placed onto the track close to the end of the start section track but beyond
the start line.
6: Positioning the Race System equipment
The Finish Gate:
This should be placed at the beginning of the nish section over the nish line.
Page 10
6: Positioning the Race System equipment.
Sector Gate (optional Fitment):
Locate the mid section of track that houses the sector timing sensors, this section of track could
be positioned anywhere between the Start and Finish Gates.
To identify the correct section look for the small round disks on the outside of the red outer
aluminium sections and the corresponding holes through the inner aluminimum section.
Position the Sector Timing Gate over the sensor positions (see below).
If the Denford F1 Race Track and Race System were purchased with the optional Sector
Timing System, the sensors are already built into the track. If the Sector Timing System
has been purchased separately the blank disks will have to be replaced with the supplied
sensors as outlined on page 8.
Autres manuels pour F1
2
Table des matières
Manuels Équipement pédagogique populaires d'autres marques
fischertechnik
fischertechnik STEM Coding Pro Manuel utilisateur
Experia
Experia IRiS Light Wand Manuel utilisateur
Pitsco Education
Pitsco Education FLO Manuel utilisateur
Sphero
Sphero RVR RV01 Manuel utilisateur
Limbs & Things
Limbs & Things 60905 Manuel utilisateur
JP
JP TURN Connect T101 Manuel utilisateur
TruCorp
TruCorp AirSim Advance Manuel utilisateur
LeapFrog
LeapFrog Mr. Pencil's Scribble, Write & Read Manuel utilisateur
ScienTECH
ScienTECH 2261 Manuel utilisateur
Rompa
Rompa 20019 Manuel utilisateur
Duinotech
Duinotech XC4322 Manuel utilisateur
Enabling Devices
Enabling Devices Spinning Light Show Manuel utilisateur