DELTA DORE TYBOX PAC Manuel utilisateur

TYBOX PAC

User guide

TYBOX

Programmable thermostat for

heat pumps

Because of changes in standards and equipment, the characteristics

given in the text and the illustrations in this document are not binding

unless confirmed by Delta Dore

Device compliant with the requirements of directives:

2004/108/CE (Electromagnetic Compatibility)

and 2006/95/CE (Low-Voltage Safety).

*2702004_rev1*

DELTA DORE - Bonnemain

35270 COMBOURG - FRANCE

E-mail : deltadore@deltadore.com

- 3 -

Contents

• Carefully read these instructions prior to use.

• Do not attempt to repair the unit yourself;

an after-sales service is available.

Warnings

Off mode

Absence mode

Timer mode

Automatic mode

Continuous mode

Time setting

Programming

Choosing the

HEAT / COOL

mode and set-point

temperature setting

Modification

buttons

Selector knob

position

Selector

knob

Request for

heat or cold

Presentation

This thermostat lets you program your heating and

cooling system to Comfort or Economy mode.

Presentation . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Automatic Mode . . . . . . . . . . . . . . . . . . . . . . . 4

Override . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Timer mode . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Continuous mode . . . . . . . . . . . . . . . . . . . . . . 7

Absence mode . . . . . . . . . . . . . . . . . . . . . . . . 8

Off mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

HEAT / COOL mode principle . . . . . . . . . . . . . . 9

Choosing the HEAT / COOL mode and

set-point temperature setting . . . . . . . . . . . . 10

Time setting . . . . . . . . . . . . . . . . . . . . . . . . 12

Programming . . . . . . . . . . . . . . . . . . . . . . . . 13

Information button . . . . . . . . . . . . . . . . . . . 17

Replacing batteries . . . . . . . . . . . . . . . . . . . 18

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . 20

Override

- 5 -

In automatic mode, override is used to switch from

Comfort to Economy mode (or conversely) until the

next program change.

Press the override button

6:00 8:00 00:0000:00 17:0015:30 23:00

Override

currently

active

At 17:00, the program will

return to its usual program

To cancel the current override,

press the button once more.

E.g. It is 15:30 and you would like to switch to Comfort

mode before the set time (17:00).

Current day programming

- 4 -

Turn the knob to AUTO.

Your thermostat will function according to the program.

Automatic mode

Override

Information

button

Display in

automatic mode

Time

Current day

Room

temperature

Current mode

Current day

programming

NOTE:

According to the configuration during installation, your

unit will continuously display the set-point temperature

or the temperature of the room.

To change these settings, refer to the “installation

guide”, or contact our customer service department or

your installer.

- 7 -

Continuous mode

Choice of set-point

temperature

(from 5 to 30°C)

Set-point

temperature

Confirm

Modification

of the set-point

temperature

This mode is used to choose a set-point temperature

that remains constant.

Turn the knob to .

- 6 -

Timer mode

Set-point temperature setting

(from 5 to 30°C)

Confirm

Return to AUTO mode

at the end of the countdown

Confirm

To cancel the current mode ,

turn the knob.

To make changes to the current

mode , press OK once more.

This mode is used to choose a set-point temperature

for a given amount of time. Turn the knob to .

Adjustment of the duration from 15 minutes

to 72 hours (in increments of 15 minutes)

To exit this mode, turn the knob.

- 9 -

This mode shuts down your system.

Turn the knob to .

Off Mode

Room

temperature

Configuration

menu access

button (press

and hold for

5 seconds)

This mode lets you place your home under Frost

Protection if you need to leave for several days.

Turn the knob to .

Return to

AUTO mode at the

end of the countdown

To make changes to the current

mode , press OK once more.

To cancel the current mode ,

turn the knob.

Set-point temperature setting

(from 5 to 15°C)

Confirm and

start the calendar

countdown.

Confirm

Adjustment of the number of days (1 to 365)

E.g. For a departure on 1 March and a

return on 16 March, program 15 days

of absence.

Automatic operation will resume on

16 March at midnight.

- 8 -

Absence mode

In COOL mode, there is no Frost Protection set point.

The system will be shut down for the programmed

time.

HEAT / COOL mode principle

(Can only be used with a reversible heat pump: heat

mode / cool mode).

In winter:

set the system to HEAT mode.

In summer:

set the system to COOL mode.

In mid-season (Spring / Autumn):

set the system to off mode.

Modes

Set-point

temperatures

HEAT mode

(In winter)

COOL mode

(In summer)

Comfort

(if you are at home)

Economy

(if you are absent)

E.g. 19°C

E.g. 16°C

E.g. 24°C

E.g. 27°C

- 10 -

Depending on the system configuration (menu 1-08),

“conf” may be displayed for the . set-point

temperature.This set-point temperature cannot be

modified. If this is the case, the Comfort set-point

temperature can be adjusted on your heat emitter

(radiator with thermostatically controlled valve, etc.).

Choosing the HEAT / COOL mode and

set-point temperature setting

Comfort set-point temperature setting

(from 5 to 30°C in increments of 0.5°C)

Confirm

Go on to temperature setting

Economy

Economy set-point temperature setting

(from 5 to 30°C in increments of 0.5°C)

Confirm

Go on to temperature setting

Comfort

Selection of the operation mode

for the HEAT / COOL regulation

To exit this mode, turn the knob.

- 11 -

The comfort and economy set-point temperatures for

the HEAT mode are independent from the comfort and

economy set-point temperatures for the COOL mode.

Turn the knob to .

To set the heat mode, select the HEAT mode:

Comfort set-point temperature setting

(from 5 to 30°C in increments of 0.5°C)

Confirm

Go on to temperature setting

Economy

Economy set-point temperature

adjustment

(5 to 30°C in increments of 0.5°C)

Confirm

Go on to temperature setting

Comfort

Selection of the operation mode for

the HEAT / COOL regulation

Turn the knob to .

To set the cool mode, select the COOL mode:

To exit this mode, turn the knob.

Programming

- 13 -

1. Choosing the HEAT / COOL mode

Turn the knob to .

Select the mode using + or - . Press OK to confirm.

2. Creating your program

Turn the knob to PROG.

The default program is:

- in HEAT mode: Comfort from 6:00 to 23:00

- in COOL mode: Comfort from 11:00 to 19:00

Programming starts on day 1 at midnight.

Press the or buttons to create different Economy

or Comfort periods.

Day

1st

Time slot

Comfort period

adjustment

Economy period

adjustment

Turn the knob to .

The days flash.

Press + or - to change the day, then press OK

to confirm and continue on to the next setting.

Repeat the operations to set the hours and minutes.

To leave the “time setting” mode, turn the knob.

Minutes

Hours

Days

(1 : Monday ...

7 : Sunday)

Time setting

- 12 -

NOTE:

If the unit is configured for a daily program,

the days setting is not offered.

The HEAT mode and the COOL mode are

independent.

Create a Comfort program and an Economy program

for each mode.

Press and hold

until you reach 06:00

Press and hold

until you reach 08:00

Press and hold

until you reach 17:00

Press and hold

until you reach 23:00

Press and hold

until you reach 00:00

Copy and confirm

or confirm

6h 8h 0h0h 17h 23h

E.g. Comfort from 6:00 to 8:00 and from 17:00 to 23:00

- 15 -- 14 -

Programming

3. Confirming and copying the program

Press and hold the OK button for 3 seconds to confirm

the program you created and copy it to the next day.

4. Confirming the program

Press the OK button to confirm and continue on to the

next day to program it separately.

5. Checking your program

Press the button repeatedly to check the accuracy of

the Comfort and Economy periods you created.

Press OK to check the next day

The programming principle is the same for HEAT mode and

COOL mode.

- comfort: periods during which the home is occupied,

- economy:periods during which the home is unoccupied.

Verification of

the different

or periods

Program

profile

Time slot

consulted

- 17 -

Information button

If your thermostat displays the temperature of the room

Current mode display

HEAT / COOL

Return to normal display

(automatic after 30 seconds)

Set-point temperature display

- 16 -

Programming

6. To program the other mode (HEAT/COOL)

Turn the knob to .

Change the mode by pressing once on + or -

Press OK to confirm.

Turn the knob to PROG, then repeat steps 2 to 5.

7. Exiting the programming mode

Turn the knob to another mode.

COMMENTS: Depending on the configuration made

during installation, programming can be weekly or daily.

Likewise, this programming may be done in increments

of one hour, 30 minutes, or 15 minutes.To change these

settings, refer to the “installation guide”, or contact our

customer service department or your installer.

In AUTO mode, pressing ionce lets you know the

current mode (if the heat pump is reversible).

Pressing ia second time gives you the temperature of

the room or the set-point temperature according to the

installation configuration.

- 19 -

Separate the thermostat

from its base.

Position the thermostat

on its base.

Lock the thermostat.

Replace the batteries,

making sure they are the right way round.

3 4

- 18 -

Replacing batteries

When the battery level symbol appears, you have

around 1 month to change the batteries

(two 1.5 V alkaline batteries, LR03 or AAA).

The following precautions must be respected:

- Ensure that the +/- polarities are correctly placed

when the battery is fitted into the unit.

- Do not dispose of used batteries in unauthorized

places (you should respect the environment by taking

the batteries to a suitable collection site).

- Do not recharge the batteries.

-You have approximately 30 seconds to change the

batteries before the time is reset to zero

(if this happens, reset the date and time).

Battery level symbol

Autres manuels pour TYBOX PAC

Table des matières

Autres manuels DELTA DORE Thermostat

DELTA DORE

DELTA DORE TYBOX Manuel utilisateur

DELTA DORE

DELTA DORE 6050675 Manuel utilisateur

DELTA DORE

DELTA DORE RADIO DIANA D10 - GUIDE D Manuel utilisateur

DELTA DORE

DELTA DORE PACK TYBOX 5000 Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 31 Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 117 Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 33 Manuel utilisateur

DELTA DORE

DELTA DORE 6053038 Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX BUS OT Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 5101 Manuel utilisateur

DELTA DORE

DELTA DORE DELTA 8000 TAP RF Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 417 Manuel utilisateur

DELTA DORE

DELTA DORE Pack TYBOX 137 Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 5150 Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 5150 Manuel utilisateur

DELTA DORE

DELTA DORE Tybox 1117 Manuel utilisateur

DELTA DORE

DELTA DORE Tybox 5701FP Manuel utilisateur

DELTA DORE

DELTA DORE Radio Diana D20 Manuel utilisateur

DELTA DORE

DELTA DORE DELTA 8000 MASTER Manuel utilisateur

DELTA DORE

DELTA DORE Rodio Tybox Pac Manuel utilisateur

DELTA DORE

DELTA DORE TYBOX 610 RF Manuel utilisateur

DELTA DORE

DELTA DORE DELTA 200 Manuel utilisateur

DELTA DORE

DELTA DORE MINOR 11 Manuel utilisateur

DELTA DORE

DELTA DORE CALYBOX 110 Manuel utilisateur

Manuels Thermostat populaires d'autres marques

EWELLY

EWELLY EW-181 Manuel utilisateur

Prolon

Prolon T1100 Instructions d'installation

Computherm

Computherm Q20 Manuel utilisateur

Heatmiser

Heatmiser neoStat Manuel utilisateur

Aube Technologies

Aube Technologies TH111GFCI-NP 240 VCA Manuel utilisateur

Mars

Mars HEAT CONTROLLER IR Wireless Thermostat Manuel utilisateur

Saswell

Saswell SAS920XWHB-7-S-RF Mode d’emploi

Aircalo

Aircalo TFP1-ET85P2 Manuel utilisateur

Honeywell

Honeywell CM721 Manuel utilisateur

Carrier

Carrier DEBONAIR 33CS Manuel utilisateur

Lennox

Lennox iHarmony Zone Thermostat Instructions de montage

Gemtech

Gemtech GT7000 Mode d’emploi

Rollei

Rollei Smartes 45000 Manuel utilisateur

Sinope

Sinope TH1300RF Manuel utilisateur

Honeywell

Honeywell RLV4305 Manuel utilisateur

Honeywell

Honeywell Prestige 2.0 THX9421 Manuel utilisateur

NuTone

NuTone NTBZ48 Instructions d'utilisation d'origine

Stelpro

Stelpro MAESTRO ASMT402AD Manuel utilisateur