Dell PowerVault 136T Guide rapide

www.dell.com | support.dell.com

Dell™ PowerVault™ 136T LTO

Tape Library

Requirements for

LTO-2/LTO-3 Mixed Mode

Configurations

LTO-2/LTO-3 混合模式

配置要求

Configuration requise pour les bibliothèques

comprenant des lecteurs LTO-2 et LTO-3

Anforderungen für gemischte LTO-2/LTO-3

Konfigurationen

LTO-2/LTO-3

のミックスモード構成の要件

LTO-2/LTO-3 혼합 모드

구성 요구 사항

Requisitos para configuraciones

de modo mixto LTO-2/LTO-3

www.dell.com | support.dell.com

Dell™ PowerVault™ 136T LTO

Tape Library

Requirements for

LTO-2/LTO-3 Mixed Mode

Configurations

Notes, Notices, and Cautions

NOTE: A NOTE indicates important information that helps you

make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to

hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property

damage, personal injury, or death.

____________________

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission

of Dell Inc. is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, and PowerVault are

trademarks of Dell Inc.; Microsoft and Windows are registered trademarks

of Microsoft Corporation.

Othertrademarksandtradenamesmaybeusedinthisdocumenttorefertoeither

the entities claiming the marks and names or their products. Dell Inc. disclaims

any proprietary interest in trademarks and trade names other than its own.

July 2005 P/N DF727 Rev. A00

Dell PowerVault 136T LTO Tape Library 3

Overview

This document provides requirements for operating a mix of LTO-2

and LTO-3 drives in the Dell™ PowerVault™ 136T LTO tape library.

The following requirements must be met in order to operate a mixed

mode library:

• LTO-2 and LTO-3 drive modules are installed in the library.

• The library meets the minimum firmware requirements.

• Correct bar code labels are applied to all LTO media in the library.

• The library is configured to read extended bar code labels.

• The backup software is configured to manage mixed media and

mixed drives.

Installing LTO-2 and LTO-3 Drive Modules

If you are installing or upgrading to LTO-3 drives, please see the

Dell PowerVault 136T User's Guide or the document titled Upgrading

the LTO-1 or LTO-2 Tape Drive Modules to LTO-3 Tape Drive Modules.

You can download both documents from the Dell Support website at

support.dell.com. There is no restriction on the number of LTO-2 or

LTO-3 drives that must be installed or the order in which the drives must

be installed. The library recognizes and utilizes the drives in any order.

However, it is recommended that similar drives are installed together

for easy management.

NOTE: Mixing of LTO-1 or SDLT drives with LTO-2 or LTO-3 drives is

not supported.

NOTE: For enhanced performance, it is recommended that customers

with 5101 Storage Network Controllers (SNC) upgrade to a 6101 SNC.

4Dell PowerVault 136T LTO Tape Library

Minimum Firmware Requirements

In order to utilize LTO-2 and LTO-3 mixed mode, the minimum firmware

versions for the library and drives are as follows:

• Library: 3.35.0001

• RMU: 193D.00002

• LTO-2 Drive: 53Y3

• LTO-3 Drive: 54K1

• SNC (Gen1): 4.25.04

• SNC (Gen2): 4.60.03

You can view the firmware levels of the library and the library components

through the Remote Management Unit (RMU) or via the Operator

Control Panel (OCP) of the library. See the PV136T User's Guide for

more information.

You can view the firmware levels of the SNC through the SNC Manager

software, or the SNC serial port, or by using telnet to connect to the

SNC's Ethernet port. See the SNC User's Guide and SNC Manager's User's

Guide for more details. You can download the SNC Manager software, the

SNC User's Guide, and the SNC Manager User's Guide from the

Dell Support website at support.dell.com.

Download the latest firmware package and instructions for the PV136T

from the Dell Support website at support.dell.com.

NOTICE: Before performing the firmware update procedure, carefully read

and follow the firmware update instructions included with the firmware

update package.

NOTE: It is required that you power down your library for at least 60 seconds

after completing the firmware updates. This will ensure all devices reset and

initialize correctly with the latest firmware.

If the minimum firmware requirements are not met, you may encounter

the following errors situations:

• The RMU may not recognize the LTO-2 or LTO-3 drives

• The library may display a SAC 42 error message that states:

An incorrect library configuration is detected.

Dell PowerVault 136T LTO Tape Library 5

• The library may display an error message that states:

Your library firmware versions do not match.

Download the latest version to the library

• The library may display an error message that states:

One or more drives have downlevel firmware. You

may wish to update these drives. See User's Guide

Update your firmware to the required firmware levels listed above to avoid

error situations.

Media Bar Code Labels

In order for the PV136T to recognize and correctly utilize LTO-2 and

LTO-3 media in the same library, correct bar code labels must be applied

to all media in the library. The bar code labels must be applied as follows:

• Labels ending in "L1" to LTO-1 media.

• Labels ending in "L2" to LTO-2 media.

• Labels ending in "L3" to LTO-3 media.

• Labels ending in "LT" to LTO-3 WORM media.

Figure 1-1. Sample LTO Bar Code Label for WORM Media

6Dell PowerVault 136T LTO Tape Library

Enabling Extended Bar Code Reading

In order for the library to recognize media via bar code labels, extended

bar code reading must be enabled in the library. By default, the library

reads an extended bar code label (5 to 13 characters).

You can access the extended bar code setting via the front control panel

on the PV136T: Main menu → Setup → Library →Media

Use the following steps to configure the bar code length.

Select

Setup

from the

Main menu

Select

Library

Select

Media

Use

Change

to select one of the following:

•

Default

– The library reads 6 character bar code labels.

•

Extended

– The library reads 5 to 13 character bar code labels.

NOTE: Use the extended length if you plan to set up backup software

to manage media, based on bar code labels.

Select

Configuring Backup Software

To enable the system to identify and utilize mixed LTO-3 and LTO-2

drives and media, we recommend that the bar code rules, media pools,

or drive pools be configured in the backup software application. The term

for mixed drive support varies for different backup software packages.

For specific details, see your backup software manual.

NOTE: If cartridges are relabeled, it is highly recommended that you perform

an inventory and catalog the media from your backup application.

NOTE: Windows® Removable Storage Manager (RSM), also known as Native

Backup, does not support mixing of LTO-2 and LTO-3 drives. It is also

recommended that you do not use native Linux utilities, such as Tar, due to the

lack of media management capabilities. Dell highly recommends using qualified

third party backup software for media and job management.

Dell PowerVault 136T LTO Tape Library 7

Troubleshooting

• The LTO drive keeps posting a "!7" when a backup or restore job

is submitted:

If an LTO-3 media is loaded into an LTO-2 drive, the LTO-2 drive will

post a '!7' indicating an unrecognized media resource.

– Remove the piece of media manually from the drive and verify that

the media has the correct bar code label applied to it. See "Media

Bar Code Labels" for specific details.

– Check that extended bar codes are enabled. See "Media Bar Code

Labels" for specific details.

– Ensure that your backup application has bar code rules, media

pools, or drive pools correctly implemented. See the backup

software user's manual.

•

The RMU does not recognize the LTO-2 or LTO-3 drives:

This is normal if the RMU has an older version of the firmware. Update

the RMU to firmware 193D.00002 or later.

•

The library may display a SAC 42 error:

An incorrect library configuration is detected.

This is normal if the library is at a version prior to firmware 3.33.

Update to library firmware 3.35 or later.

•

The library displays an error:

Your library firmware versions do not match.

Download the latest version to the library

This is normal if the library or drive firmware is outdated. Access the

Dell Support website at

support.dell.com

and update library or drive

firmware to the latest version.

•

The library displays an error.

One or more drives have downlevel firmware. You

may wish to update these drives. See User's Guide.

This is normal if the library or drive firmware is outdated. Update the

library firmware and drive firmware to the latest version.

8Dell PowerVault 136T LTO Tape Library

Autres manuels pour PowerVault 136T

Table des matières

Langues :

Autres manuels Dell Stockage

Dell

Dell PowerVault NX1950 Manuel utilisateur

Dell

Dell PowerVault RD1000 Manuel utilisateur

Dell

Dell PowerVault 775N Manuel technique

Dell

Dell PowerVault DR4100 Manuel

Dell

Dell EMC Unity All Flash Instructions d'installation et d'entretien

Dell

Dell PowerVault DL2100 Manuel utilisateur

Dell

Dell Portable Backup Hard Drive Manuel utilisateur

Dell

Dell PowerVault DL2200 CommVault Instructions d'utilisation

Dell

Dell PowerVault MD3060e Series Instructions d'utilisation

Dell

Dell PowerVault 100T Manuel utilisateur

Dell

Dell PowerVault NX3500 Manuel de service

Dell

Dell PowerVault LTO4-EH1 Manuel utilisateur

Dell

Dell PowerVault MD3260 Series Guide de référence rapide

Dell

Dell PowerStore 1000 Instructions d'installation et d'entretien

Dell

Dell PowerVault MD3260 Series Manuel utilisateur

Dell

Dell PowerVault 770N Manuel technique

Dell

Dell PowerVault Storage Area Network Manuel utilisateur

Dell

Dell PowerVault MD3200i Series Manuel utilisateur

Dell

Dell DL1300 Manuel utilisateur

Dell

Dell PowerVault NX1950 Manuel utilisateur

Dell

Dell DX6000 Manuel utilisateur

Dell

Dell PowerVault MD3000i Manuel utilisateur

Dell

Dell EqualLogic PS Series Guide de l'utilisateur

Dell

Dell PowerVault DL2200 CommVault Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur