Dell PowerVault 701N Manuel utilisateur

PowerQuest® DataKeeper™

PowerVault™ 701N/705N Edition

This guide includes the following information:

Getting Started (page 2)

Creating Your First Backup (page 8)

Creating a Custom Backup (page 10)

Restoring a Backup (page 14)

Dell Technical Support (page 16)

Getting Started

PowerQuest DataKeeper PowerVault 701N/705N Edition for Microsoft® Windows®

95, Windows 98, Windows NT® 4.0, and Windows 2000 provides an easy way to

perform secure, automated backups and restorations of all your important data to a

designated PowerVault 701N/705N or to your local hard disk. You can use this edition

of DataKeeper to:

• Back up combinations of files and folders on a specified PowerVault 701N/705N or

on your computer with options such as password protection and file compression.

• Enable remote access to files from anywhere on the network.

• Restore a single file (even from a compressed backup), a most recent version of a

file, or an older version of a file from up to a year earlier.

DataKeeper System Requirements

Before you install DataKeeper, you should ensure your computer meets the minimum

system requirements.

Processor 486DX/66 MHz or higher

RAM 8 MB (Windows 95)

16 MB (Windows 98)

32 MB (Windows NT 4.0 Workstation)

32 MB (Windows 2000 Professional)

Hard-disk space 4 MB

Getting Started

Before Installing DataKeeper PowerVault 701N/705N Edition

Before you install DataKeeper PowerVault 701N/705N Edition on each user’s

workstation, you should first prepare the PowerVault 701N/705N.

1Set up your PowerVault 701N/705N.

If needed, use the PowerVault 701N/705N manual to help you with the installation.

You must be able to access the PowerVault 701N/705N over your network, and all

the DataKeeper users must be set up as users on the PowerVault 701N/705N. The

DataKeeper Admin program (SETUPADMIN.EXE) cannot set up a private share

for guest users.

File Systems FAT, FAT32, or NTFS

Operating system Windows 95b (or later)

Windows 98

Windows NT 4.0 Workstation (through Service Pack 6)

Windows 2000 Professional

Network protocols Microsoft Networking over TCP/IP

Monitor VGA or higher resolution

Network connection One or more PowerVault 701N/705N servers

Getting Started

2Run the DataKeeper Admin Install program (SETUPADMIN.EXE) to set up

private folders (“shares”) on the PowerVault 701N/705N to hold each user’s

backup files.

You must be able to log into the PowerVault 701N/705N as an administrator to set

up shares.

3Install DataKeeper on individual workstations. DataKeeper will automatically find

the PowerVault 701N/705N that was configured with the DataKeeper Admin

program.

Running the DataKeeper Admin Install Program

The Admin Install program configures a PowerVault 701N/705N to receive DataKeeper

data using share names. Share names allow client systems to save data without asking

users for an address after the initial setup.

Running the DataKeeper Admin install program ensures that backup files on the

PowerVault 701N/705N cannot be accessed by network users other than the owner.

Use of the program’s defaults is recommended to simplify the installation and to make

file restoration easy and quick.

1Insert the DataKeeper CD into the CD-ROM drive.

2Click Start ➤Run, then click Browse.

3Navigate to the language folder of choice on the DataKeeper CD.

Getting Started

4Select SETUPADMIN.EXE, then click Open.

5Click OK.

6Select the PowerVault 701N/705N where you want user backup data to reside, then

click Create User Shares.

7Specify an approved administrator ID and password.

8Select the users that you want to share the selected PowerVault 701N/705N.

9Create shares.

You can view and change the default settings.

10 Close the application.

Users can now install DataKeeper onto their own workstations either from the

PowerVault 701N/705N (see page 5) or from the DataKeeper CD (see page 7).

Installing DataKeeper from the PowerVault 701N/705N

The DataKeeper program is first loaded onto the PowerVault 701N/705N where the

shares are set up for user workstations over the network. Then you can install the

program.

Getting Started

Loading DataKeeper onto the PowerVault 701N/705N

1Insert the DataKeeper CD in the CD-ROM drive of a workstation that has access to

the PowerVault 701N/705N.

2Copy SETUPUSER.EXE into a public share folder on the PowerVault 701N/705N.

(See the PowerVault 701N/705N Administrator Guide for directions on

configuring a public share.)

Installing DataKeeper from the PowerVault 701N/705N

Each DataKeeper user must install DataKeeper separately under his or her own

username. If there are two or more users on a single workstation, each user must

complete the installation procedure.

Notice: To avoid program conflicts, DataKeeper PowerVault 701N/705N Edition and

the standard edition of PowerQuest DataKeeper must not be installed on the

same machine.

1Use Windows Explorer to locate the public share on the PowerVault 701N/705N

with the DataKeeper program, SETUPUSER.EXE.

2Double-click SETUPUSER.EXE, then follow the on-screen instructions to install

the program.

Getting Started

Installing DataKeeper PowerVault 701N/705N Edition from the CD

Each DataKeeper user must install DataKeeper separately under his or her own

username. If there are two or more users on a single workstation, each user must

complete the installation procedure.

Notice: To avoid program conflicts, DataKeeper PowerVault 701N/705N Edition and

the standard edition of PowerQuest DataKeeper must not be installed on the

same machine.

1Insert the DataKeeper CD into your CD-ROM drive.

2From the Windows taskbar, click Start ➤Run.

3Click Browse, and navigate to the language folder of choice on the DataKeeper

CD.

4Select SETUPUSER.EXE and click Open. Follow the on-screen instructions to

install the program and select the PowerVault 701N/705N to use for backups.

Online Help for DataKeeper

For information beyond what this Quick Start Guide provides, refer to the online Help.

To access online help, click Help in any dialog, or click Help ➤Help Topics ➤

Contents on the menu bar.

Creating Your First Backup

Starting DataKeeper

1Start Windows.

DataKeeper is launched automatically at startup. The DataKeeper program icon

appears in the system tray.

If DataKeeper does not launch at startup, you can start the program manually. From

the Start menu on the Windows taskbar, click Programs ➤PowerQuest ➤

PowerQuest DataKeeper PVE.

Creating Your First Backup

After you install DataKeeper, you should make an initial set of backup files using the

Back Up Now option.

1From the DataKeeper window, click the Backup tab.

2Click Back Up Now.

3Click All selected files.

4Click OK to begin the backup.

Creating Your First Backup

Monitoring Your System

DataKeeper is set up, by default, to monitor changes to all fixed drives on your system

and to automatically create a backup of any file that you save to your hard disk.

Common program files (such as Windows files and EXE files, the directories specified

by the environment variables Temp and Tmp, and your local backup location) are

excluded from the automatic backup to minimize backup time and system impact. If you

want to back up these and other types of files, you can add them as described in

“Creating a Custom Backup” on page 10.

Monitoring, or automatic backup, remains in effect on your system as long as

DataKeeper is running or until you click Stop Monitoring from the Backup tab.

To restore a backed up file, see “Restoring a Backup” on page 14.

Exiting DataKeeper

1From the DataKeeper window, click File ➤Exit.

DataKeeper will shut down without backing up any files.

Clicking the “–” or “X” in the upper-right corner of the DataKeeper window will

minimize the program to the Windows system tray.

Creating a Custom Backup

DataKeeper includes options that let you customize how your data is backed up to a

PowerVault 701N/705N.

1From the DataKeeper window, click the Backup tab.

If necessary, click Stop Monitoring to access the backup options on the Backup

tab.

2Choose the options you want.

To: Do this:

Specify folders to

monitor

Under Select folders to monitor, click the folders you

want to monitor.

Specify file types

to monitor

Under Files to backup, click Specify File Types. Then

choose the types of files you want to back up or ignore.

To move file types between the Backup Files Matching

and Ignore Files Matching list boxes, select the files

types you want, then click << or >>.

To add more file types to a list box, type *.<file

extension> in the text box, then click << or >>.

To delete file types from a list box, select the extensions

you want, then click Delete.

Autres manuels pour PowerVault 701N

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Dell Logiciel

Dell

Dell Color Laser Printer 2130cn Comment utiliser

Dell

Dell P1913 Manuel utilisateur

Dell

Dell PowerConnect W-Airwave Manuel utilisateur

Dell

Dell PS4110 Manuel utilisateur

Dell

Dell PowerEdge UPS 500T Manuel utilisateur

Dell

Dell PowerConnect W-Airwave Manuel utilisateur

Dell

Dell DX6000 Guide de référence rapide

Dell

Dell PowerConnect W-Airwave Manuel utilisateur

Dell

Dell DX6000 Manuel de l'opérateur

Dell

Dell PowerConnect W-Airwave Manuel utilisateur

Dell

Dell PowerConnect W-Airwave Manuel utilisateur

Dell

Dell OPENVIEW NNM SE 1.2 Manuel utilisateur

Dell

Dell PowerConnect W-Airwave Manuel utilisateur

Dell

Dell External OEMR 2950 Guide de référence rapide

Dell

Dell Powerconnect W-ClearPass Hardware Appliances Manuel utilisateur

Dell

Dell PowerApp .cache 100 Manuel d'exploitation et d'entretien

Dell

Dell DX6000 Guide d'installation

Dell

Dell PowerEdge UPS 500T Manuel utilisateur

Dell

Dell Powerconnect W-ClearPass Hardware Appliances Instructions de montage

Dell

Dell External OEMR 2800 Guide de référence rapide

Dell

Dell DX6000 Manuel utilisateur

Dell

Dell OpenManage Network Manager Manuel utilisateur

Dell

Dell PowerVault MD3000i Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

Manuels Logiciel populaires d'autres marques

COMPRO

COMPRO COMPROFM Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE ONLINE Manuel utilisateur

Oracle

Oracle Contact Center Anywhere 8.1 Manuel utilisateur

Adobe

Adobe 65007312 - Photoshop Lightroom Manuel

Avaya

Avaya NULL One-X for RIM Blackberry Manuel utilisateur

HP ProLiant BL420c Manuel utilisateur

PS Audio

PS Audio PowerPlay Manuel du propriétaire

Brady

Brady LOCKOUT PRO 3.0 Manuel de service

Avaya

Avaya Interaction Center Manuel utilisateur

Texas Instruments

Texas Instruments TI-83 Plus Silver Edition Manuel

Novell

Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur

Oracle

Oracle Application 9i Manuel utilisateur

Acer

Acer RDM Manuel utilisateur

Canon

Canon Vixia HF21 Manuel utilisateur

Canon

Canon ZR950 Manuel utilisateur

Samsung

Samsung Auto Backup Manuel utilisateur

Polycom

Polycom Vortex EF2201 Instructions d'installation et d'utilisation

Brocade Communications Systems

Brocade Communications Systems Brocade 8/12c Manuel utilisateur