Dell PowerEdge C6320 Manuel utilisateur
Dell PowerEdge C6320
Getting Started Guide
使用入门指南
Panduan Pengaktifan
はじめに
시작 안내서
Scan to see how-to videos, documentation,
andtroubleshooting information
Dell PowerEdge C6320
Getting Started Guide
NOTE: A NOTE indicates important information that helps you make better use
of your computer.
CAUTION: A CAUTION indicates either potential damage to hardware or loss
of data and tells you how to avoid the problem.
WARNING: A WARNING indicates a potential for property damage, personal
injury, or death.
Dell End User License Agreement
Before using your system, read the Dell Software License Agreement that shipped with your
system. If you do not accept the terms of agreement, see Dell.com/contactdell.
Save all software media that shipped with your system. These media are backup copies of the
software installed on your system.
Copyright © 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international
copyright and intellectual property laws. Dell™and the Dell logo are trademarks of Dell Inc. in the
United States and/or other jurisdictions. All other marks and names mentioned herein may be
trademarks of their respective companies.
2016 – 01
P/N 3RKD9 Rev. A01
Installation and configuration │5
CAUTION: Restricted Access Location
This server is intended for installation only in restricted access locations as defined
in Cl. 1.2.7.3 of IEC 60950-1: 2001 where both these conditions apply:
• Access can only be gained by service persons or by users who have been
instructed about the reasons for the restrictions applied to the location and
about any precautions that shall be taken.
• Access is through the use of a tool or lock and key, or other means of security,
and is controlled by the authority responsible for the location.
Installation and configuration
WARNING: Before performing the following procedure, read and follow the
safety instructions that came with the system.
Installing the tool-less rail solution
WARNING: Whenever you need to lift the system, get others to assist you.
To avoid injury, do not attempt to lift the system by yourself.
WARNING: To avoid a potential electrical shock hazard, a third wire safety
grounding conductor is necessary for the rack installation. The rack equipment
must provide sufficient airflow to the system to maintain proper cooling.
CAUTION: When installing rails in a square-hole rack it is important to ensure
that the square pegs slide through the square holes.
NOTE: The rails can be used in both square-hole racks (item 1 in the following
figure) and round-hole racks (item 2 in the following figure).
6 │Installation and configuration
1. To open the rail latches, push the latch release buttons on the midpoints of the
end pieces of the rails. See
1
in figure 1.
2. Align the end pieces of the rails on the vertical rack flanges to seat the pegs in
the bottom and top holes of the desired U spaces. See
2
in figure 1.
Figure 1: Pushing the latch release buttons
3. To lock the latches in place, engage the end of the rails until they seat on the
vertical rack flanges, and release the latch release buttons. See
3
in Figure 2.
Figure 2: Releasing the latch release buttons
12
1
1
2
2Back View
Latch Release Button
Front View
3
3
Back View
Front View
Installation and configuration │7
4. Slide the system into the rack. See
4
in Figure 3.
5. Tighten the thumbscrews to secure the rack ears to the rack flanges.
See
5
in Figure 3.
Figure 3: Installing the chassis onto the rack
NOTE: To remove the rails, push the latch release button on the midpoints
of the end piece and unseat each rail.
5
5
4
Back View
Front View
8 │Installation and configuration
Installing the optional chassis stabilizer
shipping brackets
1. At the back of each vertical rack flange, put two screw bases into the two
square holes above the rail. See
6
in Figure 4.
2. Install the optional chassis stabilizer shipping brackets on the rack flanges.
See
7
in Figure 4.
3. Install and tighten the screws. See
8
in Figure 4.
NOTE: To transport systems already installed in the rack, ensure that the two
chassis stabilizer shipping brackets are in place.
Figure 4: Installing the chassis stabilizer shipping brackets
6
7
8
Back View
Installation and configuration │9
Optional — Connecting the keyboard, mouse,
and monitor
Connect the keyboard, mouse, and monitor (optional).
The connectors on the back of your system have icons indicating which cable to
plug into each connector. Be sure to tighten the screws (if any) on the monitor’s
cable connector.
NOTE: Note that the system supports only one USB port and a micro USB port. If
you require more than one USB outlet at a time, use USB Hub or Adapter Cable.
10 │Installation and configuration
Connecting the power cable(s)
Connect the system’s power cable(s) to the system, and if a monitor is used,
connect the monitor’s power cable to the monitor. Plug the other end of the power
cables into a grounded electrical outlet or a separate power source such as an
uninterrupted power supply or a power distribution unit.
NOTE: The system supports both AC and HVDC power inputs and up to
two1400 W power supply units (200-240 VAC nominal input voltage) or up to
two 1600 W power supply units (200-240 VAC nominal input voltage).
1400 W power supply unit is supported only for China.
Autres manuels pour PowerEdge C6320
7
Table des matières
Langues :
Autres manuels Dell Serveur
Dell
Dell POWEREDGE SC440 Manuel utilisateur
Dell
Dell EMC VxFlex Appliance R840 Manuel utilisateur
Dell
Dell PowerEdge R820 Manuel utilisateur
Dell
Dell PowerEdge 2900 Manuel utilisateur
Dell
Dell POWEREDGE 4300 Manuel utilisateur
Dell
Dell PowerEdge C8000 Manuel utilisateur
Dell
Dell PowerEdge T710 Manuel utilisateur
Dell
Dell PowerEdge T410 Manuel utilisateur
Dell
Dell Active Fabric Manager Guide de référence rapide
Dell
Dell 3250 Manuel utilisateur
Dell
Dell W4X15 Manuel utilisateur
Dell
Dell PowerEdge T610 Manuel utilisateur
Dell
Dell IP4700 Instructions d'installation et d'entretien
Dell
Dell POWEREDGE R710 Manuel technique
Dell
Dell PowerEdge R520 Guide de démarrage rapide
Dell
Dell PowerEdge C4130 Manuel utilisateur
Dell
Dell PowerEdge M915 Guide de démarrage rapide
Dell
Dell PowerEdge 4600 Manuel utilisateur
Dell
Dell PowerVault 530F Manuel technique
Dell
Dell EMC XC Core XC450 Manuel
