Dell PowerEdge C6220 II Manuel utilisateur

Dell PowerEdge

C6220 II

Getting Started

With Your System

Mise en routedusystème

Introdução ao usodosistema

Pasos inicialespara susistema

Dell PowerEdge

C6220 II

Getting Started

With Your System

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of

your computer.

CAUTION: A CAUTION indicates potential damage to hardware or loss of

data if instructions are notfollowed.

WARNING: A WARNING indicates a potential for property damage,

personal injury, or death.

______________

Informationin this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission

of Dell Inc. is st rictly forbidden.

Trademarks used in this text: Dell™, the DELL logo, and PowerEdge™ are trademarks of

Dell Inc. Intel® and Intel® Xeon® are registered trademarks of Intel Corporation in the

U.S. and other countries. Red Hat Enterprise Linux® and Enterprise Linux® are

registered trademarks of Red Hat, Inc. in the United States and/or other countries.

Novell® is a registered trademark and SUSE™ is a trademark of Novell Inc. in the United

States and other countries. Citrix® and XenServer® are either registered trademarks or

trademarks of Citrix Systems, Inc. in the United States and/or other countries. VMware®

is a registered trademarks or trademarks of VMWare, Inc. in the United States or other

countries.

Other trademarks and trade names may be used in this publication to refer to either the

entities claiming the marks and names or their products. Dell Inc. disclaims any

proprietary interest in trademarks and trade names other than its own.

RegulatoryModel B08S

May2013 P/N 1PFTR Rev. A00

Getting Started With YourSystem | 3

CAUTION: Restricted Access Location

This server is intended for installation only in restricted access locations as

defined in Cl. 1.2.7.3 of I EC 60950-1: 2001 where both these conditions apply:

•Access can only be gained by service persons or by users who have been

instructed about the reasons for the restrictions applied to the location and

about any precautions that shall be taken.

•Access is through the use of a tool or lock and key, or ot her means of

security, and is controlled by the authority responsible for the location.

Installation and Configuration

WARNING: Before performing the following procedure, review and follow the

safety instructions that came with the system.

Installing the Tool-Less Rail Solution

WARNING: Wheneveryou

needtoliftthe system, get others toassist you.

To avoid injury, do not attempt to liftthe system by yourself.

WARNING: The system is not fixedtothe rack ormounted onthe rails. To

avoid personal injury or damage to the system, you must adequately

support the system during installation and removal.

WARNING: Toavoida potentialelectrical shock hazard,a thirdwire safety

grounding conductor is necessary for the rack installation. The rack

equipment must provide sufficient airflow to the system to maintain proper

cooling.

CAUTION: When installing rails in a square-hole rack it is important to

ensure that the square peg slides through the square holes.

Getting Started With YourSystem | 4

1 Push on the latch release buttons on the midpoints of t he end piece t o

open the rail latches. See Figure 1.

2 Align the end pieces of the rails on the vertical rack flanges to seat

the pegs in the bottom hole of the first U and the top hole of the

second U.

NOTE: The rails can be used in both square-hole (item 1 in the following figure)

and round-hole racks (item 2 in the following figure).

Figure 1. Pushing the Latch Release Buttons

NOTE: To remove the rails, push on the latch release button on the midpoints

of the end piece and unseat each rail.

Getting Started With YourSystem | 5

3 Engage the end of the rails and release the latch release button to

have the latches locked in place. See Figure 2.

Figure 2. Releasing the Latch Release Buttons

Getting Started With YourSystem | 6

4 On each vertical rack flange on the back, put two screw bases into

the two square holes right above the rail. See Figure 3.

5 Inst all the chassis stabilizer shipping brackets (optional) on the back

rack flanges.

6 Inst all and tight en the s crews.

NOTE: To transport systems already installed in the rack, ensure that the two

chassis stabilizer shipping brackets (optional) are in place.

Figure 3. Installing the Chassis Stabilizer Shipping Brackets

Getting Started With YourSystem | 7

7 Slide the system into the rack. See Figure 4.

8 Tighten the thumbscrews to secure the ears of the system to the front

of t he rack flanges.

Figure 4. Installing the Chassis onto the Rack.

Getting Started With YourSystem | 8

Optional—Connecting theKeyboard,Mouse, and Monitor

Figure 5. Optional—Connecting the Keyboard, Mouse and Monitor

Connect the keyboard, mouse, and monitor (optional).

The connectors on the back of your system have icons indicating which cable to

plug into each connector. Be sure to tight en the screws (if any) on the monitor’s

cable connector.

Autres manuels pour PowerEdge C6220 II

Table des matières

Langues :

Autres manuels Dell Serveur

Dell

Dell POWEREDGE R515 Manuel utilisateur

Dell

Dell PowerEdge C6220 Manuel utilisateur

Dell

Dell PowerEdge 1750 Manuel

Dell

Dell PowerEdge R410 Manuel utilisateur

Dell

Dell PowerEdge C5125 Manuel utilisateur

Dell

Dell PowerEdge C5230 Manuel utilisateur

Dell

Dell PowerEdge R650XS M4JNT Manuel

Dell

Dell E28S Series Manuel utilisateur

Dell

Dell EMC PowerEdge T440 Manuel utilisateur

Dell

Dell VTY3T Manuel utilisateur

Dell

Dell POWER EDGE SC1430 Manuel utilisateur

Dell

Dell PowerEdge 1850 Manuel utilisateur

Dell

Dell PowerEdge C6100 Manuel utilisateur

Dell

Dell PowerEdge SC420 Manuel de la liste des pièces

Dell

Dell PowerEdge 1855 Manuel utilisateur

Dell

Dell 6100 Manuel utilisateur

Dell

Dell POWEREDGE R710 Manuel utilisateur

Dell

Dell PowerEdge R320 Manuel utilisateur

Dell

Dell PowerEdge M610x Guide de démarrage rapide

Dell

Dell OptiPlex FX130 Manuel utilisateur

Dell

Dell PowerEdge 8450 Manuel technique

Dell

Dell EMC PowerEdge R240 CHRH4 Manuel

Dell

Dell PowerEdge NF0DD Manuel utilisateur

Dell

Dell POWEREDGE 1900 Manuel utilisateur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

MSI

MSI P1-109N-L70 Manuel utilisateur

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur

Lenovo

Lenovo ThinkSystem SR635 V3 Manuel utilisateur

Fujitsu

Fujitsu PRIMERGY BX900 Manuel utilisateur

Asus

Asus RS700DA-E6 PS4 Manuel utilisateur