Dell 3130cn - Color Laser Printer Manuel utilisateur

Dell 3130cn

Service Manual

21 Aug 2009

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc.is strictly forbidden.

Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to the entities claiming the marks and

names of their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than

its own.

Version record

Refer to the portion indicated by change bar in each section.

Also refer to the reasons in table below.

Version Issue date Note

1st February 15, 2008 1st issued

2nd

March 27, 2008

2nd version issued

Section 1, FIP

1. Rewrote contents

1.1 to 1.5

2.3 terminological corrections etc.

3.1 additional flows and terminological correction

etc.

Flows 1 to 5/8 to 10/12 to 20/22 to 23/25/27 to

29/31 to 32/34 to 35/38 to 39/45 to 58/60 to

62/64/66 to 69/71 to 90/92 to 98 corrected

FIP-1.1 to 1.4/1.9 to 1.10/1.12 to 1.13/1.19 to

1.20/1.35/1.45/1.50/1.71/1.73 corrected

Flows67 to 69 added

4.1 illustration changed and table changed

4.3 terminological corrections etc.

FIP-1.P1 to 1.P15 terminological corrected

FIP-1.N1/1.N3 terminological corrected

3rd

May 30, 2008

3rd version issued

Section 1, FIP

1.5 Consumables life information added.

2.3 Expression of an error message has been

improved. etc.

3.1 Supplementary explanation etc. was added.

Flows11/FIP1.11 deleted.

Flows22/32/57/61 supplementary sentence

added.

Flows5/8/23/24/45/63 to 69 flows improved.

Flows30/46 to 52/58/60/62/75/76

Supplementary sentence added. And flow

improved.

Flows78 to 92 illustrations added.And

supplementary sentence added.

Section 2, Operation of Diagnostic

1.2/2.2 Name corrected.

4.1.2 /4.1.3/6.2/6.3 Illustration changed etc.

4.5.13 /6.9.2 Parameter value corrected etc.

5./ 6. Name corrected.

5.3 PC screen changed etc.

5.4 Name corrected etc.

5.6 Menu corrected.

6.1 Explanation of IOT Test added.

6.6 Clerical error corrected.

6.7 Clerical error corrected.

6.9.9 Counter value corrected.

Section 3, Removal and Replacement Procedure

1.1 Illustration changed.

1.2 Illustration changed.

2. Illustration changed etc.

Removal 1/3～8/ 10～15/17/ 20～26 / 28/ 31/

33～34/ 37～38/40～44/47～50 Illustration

changed etc.

Removal 36 Procedure changed. /Illustration

changed.

3. Illustration changed.

Replacement 1～4/6～7/10～11/13/16/18/20～

24 /27/29～34/36～41/43/46～50 Illustration

changed etc.

Replacement 8 Procedure changed. /

Illustration changed.

Section 4, Plug/Jack(P/J) Connector Locations

1.2 Illustration changed.

Section 5, Parts List

1.2 Illustration changed.

PL1.1/ PL2.1/ PL2.2/ PL3.2 / PL7.1/ PL8.1/

PL12.3 Illustration changed.

PL1.2/ PL3.1/ PL5.1/ PL6.1/ PL9.1/ PL10.1 List

changed/ Illustration changed.

PL12.2 Clerical error corrected.

Section 6, Principles of Operation

1.1 Illustration changed.

1.2 Illustration changed.

1.3.6 Neutralization deleted.

1.3.6 Paragraph number changed.

3.1.2/ 3.1.4 / 3.1.5 / 3.2.1 / 3.2.2 / 3.3.1 / 3.3.2 /

3.4.1 / 3.4.2 / 3.5.2 / 3.6.1 / 3.6.2 / 3.7.2 / 3.8.2

6.1 / 6.4 Illustration changed.

Section 7, Wiring Diagrams and Signal

information

2.2 Name corrected.

2 MSI&REGI Connector pin number corrected.

3 DRIVE Diagrams Clerical error corrected.

Section 8, Printer Specifications

1.1 / 3.1 / 3.4 / 3.5 / 5.3 Illustration changed.

7.2/9.1/10.1.4/10.2.2/10.5.3/10.8.1 corrected.

9.1 Option added.

10.1.4 “Supported Client” added.

10.2.1 “FTP Protocol” deleted.

10.2.2 Supplementary sentence added.

10.5.3/10.8.1 Clerical error corrected.

4th

December 17, 2008

4th version issued

Section 1, FIP

3.1 The procedure was added.

Flows 46 to 49/79

4.1 Flow changed

4.1th

April 08, 2009

4.1th version issued

Section 1, FIP

Flows25-1and Flows99 are added.

(Change by error code (016-340).)

4.2th

August 12, 2009

4.2th version issued

Section 1, FIP

Flows25/FIP1.25:

The flow of 016-317 and 016-340 was

corrected.

Flows31/FIP1.31:

The up-loading of Firmware was added.

4.3th

August 21, 2009

4.3th version issued

Section 1, FIP

Flows25/FIP1.25:

The download procedure of FW by the download

mode was added. (Only 016-317 )

Flows25-1:NEW

The download procedure of FW by the download

mode was newly added. (016-340 )

Flows31/FIP1.31:

The download procedure of FW by the download

mode was added. (016-370 )

Version 1 2007.12.28

Cautions

Operation contents of this document may be subject to modification without notice.

'HOO,QF will not assume responsibility for accidental or incidental damagesUHVXOWLQJIURPWHFKQLFDO

or editorial errors or omissions in this manual, the issue of this manual, theH[HFXWLRQRIGHVFULSWLRQV

in this manual, or the use of this manual.

This document is protected by copyright. Do not photocopy or duplicate any part of this document in

any form without written permission from 'HOO,QF

Version 1 2007.12.28

1. About this manual

This manual is a standard service manual of 'HOO,QF containing information UHTXLUHGIRUPDLQWHQDQFH

maintenance of this laser printer (standard specifications).

2. Marks giving caution

Maintenance operations requiring special cautions or additional information regarding descriptions in

this manual are presented as "Warning," "Caution," or "Note," depending on their nature.

If instructions are not observed, death or serious injury may result.

If instructions are not observed, injuries to workers or physical damage to assets

(including this laser printer) may result.

Essentials for procedures, steps, rules, and others.

Reference Incidental information to descriptions.

3. Related documents

-Instruction manuals (standard manuals)

Describe the operation and handling of this laser printer.

-Performance specifications

Describe in detail various specifications of this laser printer.

(In the event of a discrepancy between this manual and the performance specifications, the

performance specifications take precedence.)

-Spare parts list

Information on maintenance parts (spare parts) for this laser printer.

iii

Version 3 2008.05.30

4. Safety

To prevent possible accidents during maintenance operation, you should observe strictly the "Warning"

and "Caution" information in this manual.

Avoid dangerous operations and operations out of the scope of this manual.

Various processes not covered by this manual may be required in actual operations, and should be

performed carefully, always giving attention to safety.

4.1 Power source

Keep the power plug disconnected during the maintenance operation to prevent electric shock, burns

and other damages.

If the power supply should be kept connected to measure voltage or for other similar reasons, take

sufficient care to prevent electric shock, by following the procedures in this manual.

While the printer is on, never touch live parts if not required.

Power is supplied to the power switch / inlet even while the printer is off. Never

touch its live components.

Do not touch live parts unless otherwise specified.

Zna00002KA

Version 1 2007.12.28

4.2 Driving units

When servicing gears or other driving units, be sure to turn off the power switch and unplug the power

cord. Drive them manually when required.

Do not do the print work removing the cover of the printer to confirm the operation

of driving part.

4.3 High-temperature units

When servicing high-temperature units (securing unit, etc.), be sure to turn them off to prevent burns,

injuries and other troubles. Remove the power plug and start service processes after they have cooled

down sufficiently.

Because high-temperature units are still hot after they complete an operation, wait

at least 40 minutes before starting maintenance service.

Version 3 2008.05.30

4.4 Laser beams

• If your eyes are exposed to laser beams, you may lose your eyesight.

• Never open the cover if the warning label for laser beams is attached there.

• Before disassembling and reassembling this laser printer, be sure to turn it OFF.

• When servicing this laser printer while it is running, be sure to follow the

procedures specified in this manual.

• You should be well aware that the laser beams are capable of injuring you and

other people near the printer.

Laser beams have features as follows:

• Frequencies are smaller in width than other beams (sun and electric bulbs) and

phases are uniform so that high monochromatic and convergence performance

can be obtained and thin beams of light can reach places at a long distance.

• Being highly converged, the laser beams exert a heating action that may be

harmful to human body.

Reference: The laser beams of this laser printer are invisible rays.

Zna00003KA

PRINT HEAD

Autres manuels pour 3130cn - Color Laser Printer

Table des matières

Autres manuels Dell Imprimante

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Dell

Dell 1250C Manuel utilisateur

Dell

Dell 2150cn Manuel utilisateur

Dell

Dell H625cdw Manuel utilisateur

Dell

Dell B5460dn Mono Laser Printer Manuel utilisateur

Dell

Dell B3460DN Mono Laser Manuel utilisateur

Dell

Dell 5110cn - Color Laser Printer Manuel utilisateur

Dell

Dell 5100cn Instructions d'installation et d'entretien

Dell

Dell 1133 Mono Laser Caractéristiques techniques

Dell

Dell B5460dn Mono Laser Printer Manuel utilisateur

Dell

Dell 2350D Manuel utilisateur

Dell

Dell Color Laser Printer 2130cn Manuel utilisateur

Dell

Dell 2355dn Manuel utilisateur

Dell

Dell B5460dn Mono Laser Printer Manuel utilisateur

Dell

Dell S2830dn Manuel utilisateur

Dell

Dell B5460dn Mono Laser Printer Manuel utilisateur

Dell

Dell Inspiron 1110 Manuel utilisateur

Dell

Dell 5330dn - Workgroup Laser Printer B/W Manuel utilisateur

Dell

Dell H815dw Manuel utilisateur

Dell

Dell C3760DN Color Laser Manuel utilisateur

Dell

Dell 2355dn Manuel utilisateur

Dell

Dell C3765dnf Color Laser Manuel utilisateur

Dell

Dell 5330 Manuel utilisateur

Dell

Dell 1135N Manuel utilisateur

Manuels Imprimante populaires d'autres marques

Lexmark

Lexmark 1400 Series Manuel

Canon

Canon i70 Series Manuel utilisateur

Evolis

Evolis Elypso Manuel utilisateur

Kyocera

Kyocera FS-9530DN Manuel utilisateur

Canon

Canon LASER SHOT LBP-1210 Manuel utilisateur

Samsung

Samsung BIXOLON SRP-350plusF Manuel utilisateur

Canon

Canon PIXMA PRO-1 Series Manuel utilisateur

Canon

Canon PIXMA G3560 Guide de configuration

Tektronix

Tektronix Phaser 840 Manuel utilisateur

Epson

Epson ET-7750 Mode d'emploi

Canon

Canon CLBR 460ps Manuel utilisateur

Eltron

Eltron P210 Guide Manuel utilisateur

Ricoh

Ricoh MD-P1 Manuel utilisateur

Epson

Epson SC-F7100 series Manuel utilisateur

Epson

Epson Stylus C40UX Manuel utilisateur

Canon

Canon imagePASS-A2 Manuel utilisateur

Canon

Canon S820D Manuel utilisateur

IRA3D

IRA3D POETRY4 Manuel utilisateur