Dell Networking S5000 Manuel utilisateur

Dell Networking S5000

Getting Started Guide

Handbuch zum Einstieg

Guía de introducción

Guide de mise en route

ךירדמתליחתהדובע

Руководство по началу работы

Başlangıç Kılavuzu

Dell Networking S5000

Getting Started Guide

Notes, Cautions, and Warnings

NOTE: A NOTE indicates important information that helps you make better use of your

computer.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and

tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or

death.

Trademarks used in this text: Dell™, the Dell logo, Dell Boomi™, Dell Precision™, OptiPlex™, Latitude™,

PowerEdge™, PowerVault™, PowerConnect™, OpenManage™, EqualLogic™, Compellent™, KACE™,

FlexAddress™, Force10™and Vostro™are trademarks of Dell Inc. Intel®, Pentium®, Xeon®, Core®and

Celeron®are registered trademarks of Intel Corporation in the U.S. and other countries. AMD®is a

registered trademark and AMD Opteron™, AMD Phenom™and AMD Sempron™are trademarks of

Advanced Micro Devices, Inc. Microsoft®, Windows®, Windows Server®, Internet Explorer®, MS-DOS®,

Windows Vista®and Active Directory®are either trademarks or registered trademarks of Microsoft

Corporation in the United States and/or other countries. Red Hat®and Red Hat®Enterprise Linux®are

registered trademarks of Red Hat, Inc. in the United States and/or other countries. Novell®and SUSE®are

registered trademarks of Novell Inc. in the United States and other countries. Oracle®is a registered

trademark of Oracle Corporation and/or its affiliates. Citrix®, Xen®, XenServer®and XenMotion®are either

registered trademarks or trademarks of Citrix Systems, Inc. in the United States and/or other countries.

VMware®, Virtual SMP®, vMotion®, vCenter®and vSphere®are registered trademarks or trademarks of

VMware, Inc. in the United States or other countries. IBM®is a registered trademark of International

Business Machines Corporation.

2013 - 03

Rev. A00

Getting Started Guide

This document is intended as a Getting Started Guide to get new systems up and running

and ready for configuration. For complete installation and configuration information,

refer to the documents listed below:

Table 1. S5000 Documents

Information Documentation

Hardware installation and power-up

instructions

Installing the S5000 Switch

Software configuration

FTOS Configuration Guide for the S5000

Switch

Command line interface

FTOS Command Line Reference Guide for

the S5000 Switch

Latest updates

FTOS Release Notes for the S5000 Switch

Introduction

This document provides basic information about the S5000 switch, including how to

install the switch and perform the initial configuration.

For information about how to configure and monitor switch features, refer to the

FTOS

Configuration Guide for the S5000 Switch

, which is available on the Dell Support website

http://www.dell.com/support/manuals

Product Description

The S5000 is part of Dell Networking's S-Series switches for Data Center Top of Rack

(ToR) switches.

The S5000 is purpose-built to provide architectural flexibility for unified and virtualized

environments. It is a 10G ToR solution that enables converged local area networks (LAN)

and storage area networks (SAN) in the same box. The S5000 delivers Fibre Channel over

Ethernet (FCoE) and Fibre Channel (FC) capability in a one rack unit (RU) ToR switch form

factor.

The S5000 supports Data Center Bridging (ETS/PFC/DCBX), FCoE Transit (FIP Snooping),

NPIV Proxy Gateway (NPG), and Internet small computer system interface (iSCSI)

storage traffic. The S5000 also provides aggregation and convergence functionality using

pluggable modules for flexible configuration.

Unpacking the Switch

The S5000 and its accessories are shipped in multiple boxes. Before unpacking the

switch, inspect the container and immediately report any evidence of damage. Verify

that you have received your ordered items. For example, if you order one S5000 switch,

the following items are included.

WARNING: If any item is missing or damaged, contact your Dell Networking

representative or reseller for instructions.

WARNING: Electrostatic discharge (ESD) damage can occur if components are

mishandled. Always wear an ESD-preventive wrist or heel ground strap when

handling the S5000 and its components.

• One S5000 switch

• Two Fans

• Two Power Supplies (either AC or DC)

• One rail kit (#1 and #2 Phillips screwdrivers required)

• Screws for rack installation

• Two to Four I/O Modules (according to order)

• Two Blanks

• One RJ-45 to DB-9 female cable

• Two AC or DC power cords for AC or DC units (country/region specific)

•

Getting Started Guide

•

Safety and Regulatory Information

•

Warranty and Support Information

•

Software License Agreement

1. Place the container on a clean, flat surface and cut all straps securing the

container.

2. Open the container or remove the container top.

3. Carefully remove all components from the container and place it on a secure and

clean surface.

4. Remove all packing material.

5. Inspect the switch and accessories for damage.

Important Points Before You Continue

• Identify the I/O and Utility panel on the chassis. The I/O panel has four fixed

40GbE ports on the right side of the panel, refer to Figure 1. The Utility panel has

the power supply slots, LEDs, and USB slots on the left side of the panel, refer to

Figure 3.

• Identify slots 0, 1, 2, and 3 on the I/O panel, refer to Figure 2. You can insert a

Fibre Channel module only in slot 0. You can install the Ethernet modules in slots

0, 1, 2, and 3.

• Identify slots 0, 1, 2, and 3 on the Utility panel, refer to Figure 3. You can insert

Power supply units (PSUs) only in slots 0 and 3. You can insert the Fan modules

in any of the slots.

Figure 1. S5000 I/O and Utility Panels

1. I/O panel

2. Utility panel

3. Four 40GbE QSFP+ ports (each port ALSO supports 4 × 10GbE mode)

Hardware Installation Overview

To install the S5000, follow these steps:

1. Attach the mounting brackets.

2. Install the S5000 chassis into a 4–post rack or cabinet.

3. Ground the rack.

4. Install the Ethernet and/or Fibre Channel modules (Fibre Channel module must be

installed only in slot 0).

5. Install the power supplies.

6. Secure the power cables.

7. Install the fan modules.

8. Install the SFP+ and QSFP+ optics.

9. Supply power and power up the system.

Hardware Overview

This section contains information about device characteristics and modular hardware

configurations for the S5000.

The S5000 has the following physical dimensions:

• Height: 1.71 inches (43.5 mm)

• Width: 17.4 inches (441.9 mm)

• Depth: 28 inches (711.2 mm)

The S5000 has a chassis design with 640Gbps switching bandwidth.

The system also provides one DB9 RS-232 console port with YOST RJ-45 pinout and a

dedicated Ethernet service port for out-of-band (OOB) management functions.

I/O Panel

All fixed data ports (4 × 40GbE quad small form-factor pluggable plus [QSFP+] ports) and

the four slots for pluggable modules are on the I/O panel.

The I/O panel includes:

• Pluggable Modules

– 12-Port Ethernet Module (1G/10G speeds)

– 12-Port Fibre Channel Module (2G/4G/8G speeds)

• 4 × 40GbE QSFP+ Ports and light emitting diodes (LEDs)

Figure 2. S5000 I/O Panel

1. Slot 0 (supports Ethernet and Fibre

Channel modules)

2. Slot 1 (supports only Ethernet

modules)

3. Slot 2 (supports only Ethernet

modules)

4. Slot 3 (supports only Ethernet

modules)

5. Four 40GbE QSFP+ ports (each port

ALSO supports 4 × 10GbE mode)

NOTE: The LED displays for the system status are on both sides of the chassis. The

fan and power status LEDs are on the Utility panel.

Utility Panel

The Utility panel side of the platform contains the fan and power modules.

Figure 3. S5000 Power Supplies and Fan Modules

1. Slot 0 (for PSU 0)

2. Slot 1 (for Fan Module 0)

3. Slot 2 (for Fan Module 1)

4. Slot 3 (for PSU 1)

5. Grab Handles

Power Supplies

The S5000 supports two hot-swappable PSUs.

NOTE: The PSUs must be installed at the customer site.

The S5000 has SKUs that support the following configurations:

• AC PSU with fan airflow from I/O to Utility

• AC-R PSU with fan airflow from Utility to I/O

• DC PSU with fan airflow from I/O to Utility

• DC-R PSU with fan airflow from Utility to I/O

PSUs are field replaceable. To ensure power redundancy and adequate cooling, install

two power supplies in the switch. When running with full redundancy (two PSUs

installed and running), you can remove and replace one PSU while the other PSU is

running without disrupting traffic.

Fans

The S5000 supports two fan trays with airflow directions from I/O to Utility or Utility to I/O.

Do not mix I/O to Utility and Utility to I/O airflows in a single S5000 chassis. All fans and

PSUs in a configuration must be in the same airflow direction. If you create a mixed

airflow configuration, the software notifies you of the invalid configuration.

The fans must be installed at the customer site.

Port Numbering Convention

Even-numbered ports are at the bottom of the I/O panel and for modules odd-numbered

ports are at the top of the I/O panel.

Figure 4. Port Numbering

The previous figure shows the fixed four 40GbE data ports (ports 48, 52, 56, and 60) and

the four slots for pluggable modules on the S5000 I/ O panel. You can also use the 40GbE

ports in 4 × 10GbE mode.

The S5000 supports the following possible modules:

• 12-Port Ethernet Module (1G/10G speeds) (slot 0, 1, 2, or 3)

• 12-Port Fibre Channel Module (2G/4G/8G speeds) (slot 0)

The valid slot numbers are stack-unit numbers (from 0 to 11). The valid port numbers for

each interface type are:

• 1GbE: Ports 0 to 47

• 10GbE: Ports 0 to 63

• 40GbE: Ports 48, 52, 56, and 60

• Fibre Channel: Ports 0 to 11

Autres manuels pour Networking S5000

Table des matières

Langues :

Autres manuels Dell Routeur réseau

Dell

Dell Z9000 Manuel utilisateur

Dell

Dell Networking C9010 Manuel utilisateur

Dell

Dell PowerConnect B-MLXe Series Manuel utilisateur

Dell

Dell PowerConnect J-8208 Mode d’emploi

Dell

Dell POWERCONNECT J SERIES Manuel utilisateur

Dell

Dell Networking S4810 Manuel utilisateur

Dell

Dell Networking S5000 Manuel utilisateur

Dell

Dell Networking X4012 Manuel utilisateur

Dell

Dell PowerConnect 5500 Series Manuel utilisateur

Dell

Dell PowerConnect M8024 Manuel utilisateur

Dell

Dell PowerConnect 3048 Manuel utilisateur

Dell

Dell PowerConnect M8024 Mode d’emploi

Dell

Dell PowerConnect J-EX4500 Instructions d'installation

Dell

Dell PowerConnect 7000 Series Manuel utilisateur

Dell

Dell S6000-ON Manuel de la liste des pièces

Dell

Dell Precision 5750 Guide de l'utilisateur

Dell

Dell C9000 series Manuel utilisateur

Dell

Dell E1200i ExaScale Manuel utilisateur

Dell

Dell PowerConnect 3248 Manuel utilisateur

Dell

Dell PowerConnect M8024-k Manuel utilisateur

Dell

Dell S3100 Series Manuel utilisateur

Dell

Dell PowerConnect J-8216 Manuel utilisateur

Dell

Dell PowerConnect J-8208 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité