Degelman REV1500 Manuel de programmation

OPERATOR &

PARTS MANUAL

REV1500/1000

ROTARY CUTTER

DEGELMAN INDUSTRIES LTD.

BOX 830-272 INDUSTRIAL DRIVE,

REGINA, SK, CANADA, S4P 3B1

FAX 306.543.2140 PH 306.543.4447

1.800.667.3545 DEGELMAN.COM

143292 v1.6

TABLE OF CONTENTS

Introduction 1

Safety 3

How To Set Your Tractor 8

How To Hook-Up Your Cutter 9

Cutter Preparation 11

How To Set Your Cutter 12

How To Operate Your Cutter 15

Transporting 17

Troubleshooting 19

Maintenance & Service 23

How To Store Your Cutter 33

Parts 34

Index 69

Warranty 70

DEGELMAN INDUSTRIES LTD.

BOX 830-272 INDUSTRIAL DRIVE,

REGINA, SK, CANADA, S4P 3B1

FAX 306.543.2140 PH 306.543.4447

1.800.667.3545 DEGELMAN.COM

IMPORTANT:

READ MANUAL

-1-

143292 - REV1500/1000 Rotary Cutter (30-January-2018)

Introduction

This manual has been designed to help you with

three extremely important issues: Operation, Safety,

and Maintenance. It is strongly recommended that

you read through the entire manual and review it

annually for:

• your own personal safety.

• the safety of others.

• helpful and effective operation

techniques.

• maintenance procedures.

• preventative maintenance.

Your authorized Degelman dealer can be

contacted for ordering any replacement parts,

decals, or manuals. Since many of our parts are

specially designed speciﬁcally for this Rotary Cutter

we strongly recommend you always replace them

with genuine Degelman parts only.

This manual and its contents were current at the time

of its ﬁrst printing. To increase product performance

and operation, some part modiﬁcations and changes

may occur that are not reﬂected in this manual.

Note: The description “Right”or“Left” as used in this

manual is determined by the direction the tractor

will travel while in use (unless otherwise stated).

Degelman is proud to welcome you to our rapidly

increasing family of high quality and dependable

product owners. This product was designed and

built speciﬁcally for you, the customer. Through our

research and with your input and feedback, we

present to you our REV1500/1000 Rotary Cutters.

Designed with durability, safety, and performance in

mind, this rotary cutter is ready for years of quality

service. In order to help you keep your rotary cutter

in top operating condition we have provided you

with this manual.

Serial Number Plate

Your serial number is found on the serial number

plate attached to the cutter on the front left side of

the cutter near the driveline shield (shown in the

photo above).

It is important to record the serial and model

number of your cutter for proof of ownership and

for any required service or maintenance assistance.

Serial Number

Owner

Model

PTO Speed: 540 RPM 1000 RPM

The REV1500 Rotary Cutter consists of one center

assembly and two wing sections. The overall cutting

width is 15 feet. (REV1000 width is 10 feet)

Wing angle and machine cutting height are

independently controlled with hydraulic cylinders.

The cutter maintains a level cut at all cutting heights

with our self-leveling system and unique double

acting suspension.

Welcome Proof of Ownership

About This Manual

Description

Left

Side

Right

Side

-2-

143292 - REV1500/1000 Rotary Cutter (30-January-2018)

Speciﬁcations and Options

REV1500 ROTARY CUTTER

1000 model specs shown in ()’s

Field Position:

Cutting Height 1” to 16”

Cutting Width 180” (123-1/2”)

Overall Width 189” (138-1/2”)

Overall Length 198”

Side Depth 13”

Transport Position:

Overall Height 84”

Overall Width (no wheels) 96” (92”)

Overall Width (with wheels) 122” (105”)

Overall Length 198”

Ground Clearance: 15”

Weight: 5830 lbs (5780 lbs)

Hitch Weight:

Field Position 1975 lbs (1970 lbs)

Transport Position 1925 lbs (1920 lbs)

Wing Flex: 22° down, 88° up

Deck Thickness: 3/16” High Impact Resistant Steel

Skid Shoes:

Wing 1/2” x 3” AR400

Center Section 1/2” x 5-1/2” AR400

Deck Rings: Standard

Side Skirt Thickness: Laminated up to 7/16” thick

Chain Shield:

Standard Double Row 5/16” GR 30

Optional Cable through Chain 1/4” Cable

Minimum Tractor PTO Power: 100 hp

Drivelines:

540 RPM Machine Gearcases

Tractor to Transfer CAT 6 with 80° CV

Transfer to Center/Wing CAT 5

1000 RPM Machine Gearcases

Tractor to Transfer CAT 6 with 80° CV

Transfer to Center/Wing CAT 5

Driveline Protection: Preset Friction Torque Limiters

Brush Cutting Capacity: 4”

Blade Holder:

Standard 3/4” Blade Carrier

Blades: Milled, 7-1/2” Overlap

Standard 1/2” x 5”

Blade Tip Speed:

540 PTO

Center 17,300 ft/minute

Wing 16,575 ft/minute

1000 PTO

Center 17,500 ft/minute

Wing 15,950 ft/minute

Wing Lift Hydraulics:

Standard Single acting individual circuits

Optional Double acting individual circuits

Hitch: Self-leveling

Standard 1-1/4” Precision Clamping System

Optional 1-1/8” Clevis Hitch

Suspension:

Center: Walking Axle and Rubber Spring

Wings: Standard Single Wheel and Rubber Spring

Optional Walking Axle and Rubber Spring

Wheels/Tires:

Standard 5 Bolt 21x5.5 Laminated

Optional 5 Bolt 22x6.6 Aircraft (foam ﬁlled)

Optional 5 Bolt 22x6.6 Aircraft (air ﬁlled)

Optional Accessories:

Toolbox, Wing Guide Wheel

Gearcase Power Rating:

Transfer Gearcase: 200 hp - continuous

250 hp - peak

Center and Wing Gearcase: 175 hp - continuous

200 hp - peak

CAUTION

DANGER

WARNING

-3-

143292 - REV1500/1000 Rotary Cutter (30-January-2018)

The Safety Alert Symbol identiﬁes important safety

messages applied to the Rotary Cutter mower and in

this manual. When you see this symbol, be alert to

the possibility of injury or death. Follow the

instructions provided on the safety messages. The Safety Alert Symbol means:

ATTENTION!

BECOME ALERT!

YOUR SAFETY IS INVOLVED!

DANGER: Indicates an imminently hazardous situation

that, if not avoided, WILL result in death or serious injury

if proper precautions are not taken.

WARNING: Indicates a potentially hazardous

situation that, if not avoided, COULD result in death or

serious injury if proper precautions are not taken.

CAUTION: Indicates a potentially hazardous situation

that, if not avoided, MAY result in minor or moderate

injury if proper practices are not taken, or, serves as a

reminder to follow appropriate safety practices.

Why is SAFETY important to YOU?

3 BIG Reasons:

•Accidents Can Disable and Kill

•Accidents Are Costly

•Accidents Can Be Avoided

Note the use of the Signal Words: DANGER, WARNING, and CAUTION with the safety messages.

The appropriate Signal Word has been selected using the following guidelines:

Safety

Safety Alert Symbol

Signal Words

-4-

143292 - REV1500/1000 Rotary Cutter (30-January-2018)

Safety

Peligro: Si no lee Ingles, pida ayuda a alguien

que si lo lea para que le traduzca las medidas de

serguridad.

Danger: Si vous ne compreniez pas l’anglais,

demanderiez à quelqu’un qui comprend l’anglais

pour traduire tous les messages de sécurité qui se

trouve dans ce manuel.

Danger: Do not operate the tractor or rotary

cutter until you have fully read and completely

understand this operators manual, your tractor’s

operators manual, and all the safety messages

found within these manuals, on the products, or

other included materials.

Prepare for Emergencies

• Be prepared if a ﬁre starts.

• Keep a ﬁrst aid kit and ﬁre

extinguisher handy.

• Keep emergency numbers for doctor, hospital,

ambulance, and ﬁre department near your phone.

Doctor

Ambulance

Hospital

Fire Department

General Safety

Wear Protective Equipment

• Wear proper safety equipment

such as safety glasses and shoes,

hearing protection, hard hats, or

any other appropriate items to

prevent injury.

• Wear close ﬁtting clothing to

help prevent accidental

entanglement.

Note: Always stop tractor engine and

wait for all moving parts to stop before

approaching equipment.

• Loss of hearing or hearing impairment may result

from prolonged exposure to loud noise. Wear

suitable hearing protective devices such as earmuffs

or earplugs to protect your hearing.

• Safely operating this equipment requires the full

attention of the operator. Do not wear radio or

music headphones, or talk on your phone while

operating this machine. Never operate while

under the inﬂuence of alcohol or drugs or allow

anyone under the inﬂuence to operate the tractor

or rotary cutter.

-5-

143292 - REV1500/1000 Rotary Cutter (30-January-2018)

Safety

Decal Part # - 143128

Decal Part # - 143130

Decal Part # - 143125

Decal Part # - 143148

Decal Part # - 143146 Decal Part # - 143147

Safety Decals

Decal Part # - 143126

Decal Part# - 143127

Decal Part # - 143129

Decal Part # - 143171

Decal Part # - 143124

Read and Understand all Safety Decals BEFORE Operating

Important:

• Understanding and following the information

found on these safety decals can save your life

and extend the life expectancy of your cutter.

• Keep safety signs and decals clean and

legible at all times.

• If safety signs or decals are missing

or illegible they must be replaced.

• If repair work causes any decals to be

damaged or removed they must be replaced.

• Safety decals for replacement are available

by request. Call toll free: 1.800.667.3545

Decal Part # - 142557 - Amber Reﬂector 2” x 9”

Decal Part # - 142556 - Red Reﬂector 2” x 9”

Decal Part # - 142650 - Fluorescent Reﬂector 2” x 9”

10 or

19 21

22 23

-6-

143292 - REV1500/1000 Rotary Cutter (01-March-2018)

Safety - Decal Locations

Item Part# Quantity Description

13 142008 3 Degelman Decal - 6” x 25-3/4”

14 143267 2 REV1500 (15ft models)

or 143284 2 REV1000 (10ft models)

15 143162 1 Read Operators Manual

16 142557 6 Amber Reﬂector Decal - 2” x 9”

17 142650 2 Fluorescent Reﬂector Decal - 2” x 9”

18 142556 4 Red Reﬂector Decal - 2” x 9”

19 143261 1 Important - Gearbox Lube

20 143264 1 Important - Slip Clutch

21 143265 1 Important - Torque Gearbox

22 143136 2 Direction Arrow - Counter-Clockwise

23 143167 2 Direction Arrow - Clockwise

Item Part# Quantity Description

1 143124 4 Danger - Thrown Objects

2 143126 3 Danger - Rotating Driveline

3 143127 2 Danger - Falling Wing

4 143129 4 Danger - Rotating Blade

5 143171 1 Danger - Damaged Blades

6 143125 1 Warning - Rollover Hazard

7 143128 2 Warning - Crushing Hazard

8 143130 1 Warning - High Pressure Fluid

9 143146 1 Caution - 540 RPM PTO Only

10 143147 1 Caution - 1000 RPM PTO Only

11 143131 2 Important - Before Transporting

12 143148 1 Mower Safety Instructions

Front

Back

Counterweight decals for REV1000 models (left-hand shown)

-7-

143292 - REV1500/1000 Rotary Cutter (30-January-2018)

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Degelman Matériel agricole

Degelman

Degelman 9075 Manuel de programmation

Degelman

Degelman 7900 Series Manuel utilisateur

Degelman

Degelman PRO-TILL 14 Manuel utilisateur

Degelman

Degelman LANDROLLER 45 Manuel utilisateur

Degelman

Degelman Rock King 9600 Manuel de programmation

Degelman

Degelman Pro-till 20 Manuel de programmation

Degelman

Degelman Pro-Till 33 Manuel de programmation

Degelman

Degelman STRAWMASTER 54NT Manuel de programmation

Degelman

Degelman PRO-TILL 33/40 Manuel utilisateur

Degelman

Degelman shuttlekart 1150 Manuel de programmation

Degelman

Degelman M28 Manuel utilisateur

Degelman

Degelman PRO-TILL SCORPION HITCH Manuel de programmation

Degelman

Degelman Pro-Till 33 Manuel de programmation

Degelman

Degelman STRAWMASTER X 70 Manuel de programmation

Degelman

Degelman R570P Manuel de programmation

Degelman

Degelman PRO-CAST 80 Manuel de programmation

Degelman

Degelman STRAWMASTER 50 Manuel de programmation

Degelman

Degelman Tri-Plex Landroller 7634 Manuel de programmation

Degelman

Degelman LANDROLLER FIVE-PLEX 8000 Series Manuel de programmation

Degelman

Degelman ROCK DIGGER RD320 Manuel de programmation

Degelman

Degelman Signature Series Manuel de programmation

Degelman

Degelman PRO-TILL 41 Manuel utilisateur

Degelman

Degelman rock rake RR1500 Manuel de programmation

Degelman

Degelman STRAWMASTER Plus Manuel utilisateur

Manuels Matériel agricole populaires d'autres marques

GSi

GSi PNEG-2314 Manuel utilisateur

Checchi & Magli

Checchi & Magli TEXDRIVE Manuel utilisateur

Amazone

Amazone Cenius 4003-2TX Manuel utilisateur

MASSEY FERGUSON

MASSEY FERGUSON MF 9313S Manuel utilisateur

Cima

Cima BLITZ Instructions d'utilisation et d'entretien

Amazone

Amazone CombiDisc 3000 Instructions d'installation

HE-VA

HE-VA Disc-Roller XL Contour Manuel utilisateur

AGT

AGT AGT-SSFM Manuel utilisateur

Milestone

Milestone 72-84 Manuel utilisateur

KUHN

KUHN Hector 3000 Manuel utilisateur

Krone

Krone X-Disc 6200 Manuel utilisateur

Eliet

Eliet DZC450 Manuel utilisateur

Taarup

Taarup BIO+ B4000 Manuel utilisateur

Garland

Garland SHAKER 310 DPG Manuel utilisateur

stable comfort

stable comfort StableWall System Manuel utilisateur

Raven

Raven AccuBoom Manuel utilisateur

International

International 710 Manuel utilisateur

Ashland

Ashland HDW-3217-14 Manuel utilisateur