SECTION 1
Technical Features & Sectons of Oven
SECTION 2
Important Safety Notices
SECTION 3
Installation of Built-In Oven
SECTION 4
Introducton of Control Panel
SECTION 5
Usage of Oven
SECTION 6
Grill Function of Oven
SECTION 7
Adjustment of Timer (Optional)
SECTION 8
Maintenance & Cleaning
SECTION 9
Information on Transportation
SECTION 10
Things To Do Before Calling Authorised Service
SECTION 1
Technical Features & Sectons of Oven
SECTION 2
Important Safety Notices
SECTION 3
Installation of Built-In Oven
SECTION 4
Introducton of Control Panel
SECTION 5
Usage of Oven
SECTION 6
Grill Function of Oven
SECTION 7
Adjustment of Timer (Optional)
SECTION 8
Maintenance & Cleaning
SECTION 9
Information on Transportation
SECTION 10
Things To Do Before Calling Authorised Service
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
SECTION 4 INTRODUCTION of CONTROL PANEL
Push the button to get it out..Then turn it to related level. At the end of cooking
turn the buttons to (0) position and push them to get in.
SECTION 5 USAGE of OVEN
Control Switches of Oven
Indicator lamp will be on together with thermostat switch. When the heat
inside the oven reaches the set value, thermostat cuts the circuit and the
lamp is off. When the heat is below set value, thermostat is on again and
indicator lamp is lit.
Usage of Oven
During initial operation of your oven, a smell arising from insulation materials and
heating elements will be generated. To avoid it, operate your oven at 250 C for 45
minutes without putting any trays before use.
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances must
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possibility
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law and
standarts to be in force.
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Fi
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
1 Thermostat
2 Timer
3 Selections
Push the button to get it out..Then turn it to related level. At the end of cooking
turn the buttons to (0) position and push them to get in.
SECTION 5 USAGE of OVEN
Control Switches of Oven
Indicator lamp will be on together with thermostat switch. When the heat
inside the oven reaches the set value, thermostat cuts the circuit and the
lamp is off. When the heat is below set value, thermostat is on again and
indicator lamp is lit.
Usage of Oven
During initial operation of your oven, a smell arising from insulation materials and
heating elements will be generated. To avoid it, operate your oven at 250 C for 45
minutes without putting any trays before use.
Figure 5. 13550 Control Panels (Digital&Mechanical Timer)
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances must
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possibility
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law and
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
- When opening the appliance door, take care to avoid skin contact with
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shor
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese co
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Se
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instruct
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Fi
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
1 Thermostat
2 Timer
3 Selections
Push the button to get it out..Then turn it to related level. At the end of cooking
turn the buttons to (0) position and push them to get in.
SECTION 5 USAGE of OVEN
Control Switches of Oven
Indicator lamp will be on together with thermostat switch. When the heat
inside the oven reaches the set value, thermostat cuts the circuit and the
lamp is off. When the heat is below set value, thermostat is on again and
indicator lamp is lit.
Usage of Oven
During initial operation of your oven, a smell arising from insulation materials and
heating elements will be generated. To avoid it, operate your oven at 250 C for 45
minutes without putting any trays before use.
Figure 5. 13550 Control Panels (Digital&Mechanical Timer)
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances must
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possibility
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law and
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
