Datalogic QuickScan Mobile Manuel utilisateur

QUESTIONS?

Ask the experts at POSMicro.com.

1.800.241.6264

Live Chat Now

[email protected]

Monday - Friday 6 AM to 5 PM Pacic Time

BULK DISCOUNTS

FREE SHIPPING*

SE HABLA

ESPAñOL

*Free ground shipping to the continental USA on orders over $100.

For Help Call

1.800.241.6264

Datalogic QuickScan

Mobile Quick Start

More information available at POSMicro.com

QuickScan

Mobile

Quick Reference Guide

Datalogic Scanning, Inc.

959 Terry Street

Eugene, Oregon 97402

USA

Telephone: (541) 683-5700

Fax: (541) 345-7140

tion or the procedures described therein may be reproduced or transmitted in any form

or by any means without prior written permission of Datalogic Scanning, Inc. or its sub-

sidiaries or affiliates ("Datalogic" or “Datalogic Scanning”). Owners of Datalogic products

are hereby granted a non-exclusive, revocable license to reproduce and transmit this

documentation for the purchaser's own internal business purposes. Purchaser shall not

remove or alter any proprietary notices, including copyright notices, contained in this

documentation and shall ensure that all notices appear on any reproductions of the

documentation.

Should future revisions of this manual be published, you can acquire printed versions by

contacting your Datalogic representative. Electronic versions may either be download-

able from the Datalogic website (www.scanning.datalogic.com) or provided on appro-

priate media. If you visit our website and would like to make comments or suggestions

about this or other Datalogic publications, please let us know via the "Contact Data-

logic" page.

Disclaimer

Datalogic has taken reasonable measures to provide information in this manual that is

complete and accurate, however, Datalogic reserves the right to change any specifica-

tion at any time without prior notice.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many

countries, including the U.S.A. and the E.U. All other brand and product names may be

trademarks of their respective owners.

iii

CONTENTS

Updates and Language Availability...................................................................iv

Using QuickscanTM Mobile ReaderandCradle............................................................. 1

System Connections......................................................................................... 5

QuickScan Mobile Cradle Configuration ............................................................. 8

QuickScan Mobile Reader Configuration............................................................ 8

Interface Selection............................................................................................ 9

USB Interface Configuration ........................................................................... 10

USB Interface Selection.................................................................................. 11

RS-232 Interface Selection............................................................................. 12

Wedge Interface Selection.............................................................................. 13

USB / Wedge Keyboard Nationality................................................................. 16

IBM46xx Interface Selection ........................................................................... 17

Pen Interface Selection................................................................................... 18

Operating Test................................................................................................ 19

Reader Default Configuration.......................................................................... 20

Cradle Default Configuration........................................................................... 21

Technical Features ......................................................................................... 22

Warranty......................................................................................................... 24

Patents........................................................................................................... 24

Services and Support...................................................................................... 24

Compliance..................................................................................................... 25

Reading Diagram............................................................................................ 28

Numeric Table ................................................................................................ 29

UPDATES AND LANGUAGE AVAILABILITY

UK/US

The latest drivers and documentation updates for this product are available on

Internet.

Log on to: www.scanning.datalogic.com

Su Internet sono disponibili le versioni aggiornate di driver e documentazione di

questo prodotto. Questo manuale è disponibile anche nella versione italiana.

Collegarsi a: www.scanning.datalogic.com

Les versions mises à jour de drivers et documentation de ce produit sont

disponibles sur Internet. Ce manuel est aussi disponible en version française.

Cliquez sur: www.scanning.datalogic.com

Im Internet finden Sie die aktuellsten Versionen der Treiber und Dokumentation

von diesem Produkt. Die deutschsprachige Version dieses Handbuches ist

auch verfügbar.

Adresse : www.scanning.datalogic.com

En Internet están disponibles las versiones actualizadas de los drivers y

documentación de este producto. También está disponible la versión en

español de este manual.

Dirección Internet: www.scanning.datalogic.com

QUICKSCANTM MOBILE

USING QUICKSCANTM MOBILE READER AND

CRADLE

The QuickScan Mobile reader and cradle build a Cordless Reading System for

the collection, decoding and transmission of barcoded data.

Standard models can be connected to a Host PC through a USB, RS-232,

Wedge or Pen emulation cable. All models are suited for single-cradle layouts.

The LEDs signal the QuickScan Mobile cradle status, as described in the

following table:

LED BEEPER STATUS

Power on /

Data

Yellow On = QuickScan®Mobile cradle is

powered.

Yellow Blinking = the cradle receives data

and commands from the Host or the reader.

Charging - Red On = the battery charge is in progress.

Charge

completed

Green On = the battery is completely

charged.

Alternating

red/green Repetitive

beep Charging out of temperature range, over-

current or over-voltage conditions

Power on / Data

(yellow LED)

Charging

(red LED)

Charge completed

(green LED)

DATALOGIC

READING ANGLE

QuickScanTM Mobile readers automatically scan barcodes at a distance. Simply

aim and pull the trigger. Code scanning is performed along the center of the

light bar emitted from the reading window. This bar must cover the entire code.

Successful scanning is obtained by tilting the reader with respect to the barcode

to avoid direct reflections, which could impair the reading performance. See the

figures below.

Successful reading is obtained by an audible tone.

OK Not Advised

HANDS-FREE USE

When using the QuickScan Mobile on the cradle, remember to lock the reader

by pushing up the locking system as indicated in the following figure.

Good read LED

QUICKSCANTM MOBILE

USING YOUR QUICKSCANTM MOBILE READING SYSTEM

Follow the procedure below to start using your QuickScan Mobile reading

system:

1. Connect a QuickScan Mobile cradle to the Host. For installation and

connection information see page 5.

2. Insert the QuickScan Mobile reader into the cradle to start the battery

charging.

A full charge of the Lithium battery takes 3.5 – 6 hours.

To achieve the best battery life, it is recommended to perform a

full battery charge before using the reader in hand-held mode.

NOTE

In hands-free use, you can immediately start using the reader, since it is

3. Configure the QuickScan Mobile reader.

4. Configure the QuickScan Mobile cradle. See QuickScan Mobile cradle

configuration on page 8.

CHANGING THE BATTERIES

To change the battery of your reader, you must:

1. Unscrew the battery cover screw (Figure 1)

2. Unplug the white connector and remove the old battery (Figure 2)

3. Insert the new battery and plug in the white connector

When inserting the new battery into the handle pay attention to

position the battery and the connector just as shown in Figure 3.

NOTE

Figure 1

Figure 2

Figure 3

DATALOGIC

4. Insert the cover in the handle and screw it back into place.

Figure 4

Do not incinerate, disassemble, short terminals or

expose to high temperature. Risk of fire, explosion. Use

specified charger only. Risk of explosion if the battery

is replaced by an incorrect type. Dispose of the

batteries as required by the relevant laws in force.

WARNING

QUICKSCANTM MOBILE

SYSTEM CONNECTIONS

Connections should always be made with power off!

CAUTION

You can connect the QuickScanTM Mobile cradle to the Host through the

dedicated connector, using the cable corresponding to the desired interface

type.

1. Connect the appropriate interface cable to the cradle by simply plugging it

into the Host connector on the base of the cradle.

QuickScan Mobile Cradle - Bottom View

To disconnect the cable, insert a paper clip or other similar object into the hole

corresponding to the connector on the base of the cradle. Push down on the clip

while unplugging the cable. Refer to the following figure:

Disconnecting the Cable

RS-232

USB

Host Interface Cable

Autres manuels pour QuickScan Mobile

Table des matières

Autres manuels Datalogic Lecteur de codes-barres

Datalogic

Datalogic Arex 420 Manuel utilisateur

Datalogic

Datalogic Magellan 1100i Manuel utilisateur

Datalogic

Datalogic DX8210 Manuel utilisateur

Datalogic

Datalogic Heron HD3130 Manuel d'installation et d'exploitation

Datalogic

Datalogic lynx bt Manuel utilisateur

Datalogic

Datalogic Magellan 3300HSi Manuel utilisateur

Datalogic

Datalogic Magellan 2200VS Manuel utilisateur

Datalogic

Datalogic QW2120 Manuel utilisateur

Datalogic

Datalogic QuickScan QM2400 Manuel utilisateur

Datalogic

Datalogic Magellan 3300HSi Manuel utilisateur

Datalogic

Datalogic Magellan 1100i Manuel d'installation et d'exploitation

Datalogic

Datalogic QuickScan I QD21 1 Series Manuel d'installation et d'exploitation

Datalogic

Datalogic PowerScan 9501-AR Series Manuel d'installation et d'exploitation

Datalogic

Datalogic DX6400 Manuel utilisateur

Datalogic

Datalogic Gryphon GFE4400 Guide de configuration rapide

Datalogic

Datalogic Gryphon GBT4102 Manuel utilisateur

Datalogic

Datalogic DS1100 SH2347 Manuel utilisateur

Datalogic

Datalogic Gryphon GBT4200 Manuel utilisateur

Datalogic

Datalogic PowerScan D8330 Manuel utilisateur

Datalogic

Datalogic DS4600A Manuel utilisateur

Datalogic

Datalogic PowerScan Area Imager Manuel utilisateur

Datalogic

Datalogic PowerScan PD9531-AR Manuel utilisateur

Datalogic

Datalogic Cobalto C05300 Manuel d'installation et d'exploitation

Datalogic

Datalogic MAGELLAN 8500? Manuel d'installation et d'exploitation

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur

Atid

Atid AT188N Plus Manuel utilisateur