Datalogic DS2x00N-DS4800 Series Mode d’emploi

DS2X00N-DS4800 SCANNER FAMILY

SETUP PROCEDURE USING PROGRAMMING BARCODES

1 ID-NET™ NETWORK SETUP USING PROGRAMMING

BARCODES

For any DS2x00N-DS4800 Family scanner, programming barcodes can be used to setup the

ID-NET™ built-in high-speed interface dedicated for high-speed reader interconnection.

ID-NET™ is in addition to the Main and Auxiliary serial interfaces.

Following topologies are available:

ID-NET™ M/S Synchronized: Single station – multiple scanners

The ID-NET™ interface allows local connection of multiple scanners that are reading on

different sides of the same target. All scanners share a single presence sensor and

activate/deactivate simultaneously.

At the end of each reading phase a single data message is transmitted to the host.

Thanks to ID-NET™, data communication among scanners is highly efficient so that an

immediate result will be available.

Main Serial Interface (RS232 or RS485)

External Trigger (for On-Line Mode)

ID-NET™ (up to 16 devices - practical limit)

Host

Master

Slave#1 Slave#n

Power

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata: Multiple stations – single scanner

The ID-NET™ interface allows connection of scanners that are reading objects placed on

independent conveyors. All scanners are typically located far away from each other and they

use a dedicated presence sensor.

At the end of each reading phase, every scanner transmits its own data message to the host.

Thanks to ID-NET™, data collection among readers is accomplished at a high speed without

the need of an external multiplexing device. This leads to an overall cost reduction and to

simplified system wiring.

Terminal

Main Serial Interface (RS232 or RS485)

Auxiliary Serial Interface (Local Echo) (RS232)

External Trigger (for On-Line Mode)

ID-NET™ (up to 32 devices, max network extension of 1000 m)

Host

Master Slave#1 Slave#n

Power

Setup Procedure Using Programming Barcodes

1. Press and hold the X-PRESS™ button to enter the “AutoLearn Mode”. Once button is

pressed, the LED cycle appears as follows:

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS



Just pressed.



After 2 seconds.



After 4 seconds.

Release the button to

enter the AutoLearn

Mode.

The laser beam turns ON

and the yellow LEARN

LED blinks: the

AutoLearn Mode is

working.

2. Now, put the barcode related to the planned role and address in front of the scanner.

The picture below shows, as example, the scanner configuration as “Slave 1” 1:

3. Once the scanner has successfully read the code, the LEDs stay on steady for 2

seconds:

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

Successful reading.

1the barcodes shown are examples, only. Use the barcodes in the Network Layout Barcodes paragraph for the

actual programming.

Slave 1

Setup Procedure Using Programming Barcodes

4. The scanner is programmed and the AutoLearn Mode ends. The green “ready” LED

is on.

SETUP

LEARN

TEST

READ

GOOD

TRIGGER

COM

STATUS

Programming done.

5. Repeat steps 1..3 above to configure all the slaves and master. The maximum

number of scanners is 32, including the master.

6. Connect the master scanner to a PC by means of the Genius™ configuration software.

Master

Slave 1

Slave n

Setup Procedure Using Programming Barcodes

7. Start the Genius™ Express Network Setup procedure. Refer to the Help On Line

document for details.

NOTE

Any network role can also be programmed using Genius™. Refer to the

Help On Line documentation for further details.

Setup Procedure Using Programming Barcodes

NETWORK LAYOUT BARCODES

ID-NET™ M/S Synchronized

Ì$+SYN00$-dÎ

Master

Ì$+SYN01$-kÎ

Slave 1

Ì$+SYN02$-rÎ

Slave 2

Ì$+SYN03$-yÎ

Slave 3

Ì$+SYN04$-ÄÎ

Slave 4

Ì$+SYN05$-ÂÎ

Slave 5

Ì$+SYN06$-'Î

Slave 6

Ì$+SYN07$-.Î

Slave 7

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Synchronized

Ì$+SYN08$-5Î

Slave 8

Ì$+SYN09$-<Î

Slave 9

Ì$+SYN10$-jÎ

Slave 10

Ì$+SYN11$-qÎ

Slave 11

Ì$+SYN12$-xÎ

Slave 12

Ì$+SYN13$-ÃÎ

Slave 13

Ì$+SYN14$-ÊÎ

Slave 14

Ì$+SYN15$-&Î

Slave 15

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata

Ì$+MUL00$-8Î

Master

Ì$+MUL01$-?Î

Slave 1

Ì$+MUL02$-FÎ

Slave 2

Ì$+MUL03$-MÎ

Slave 3

Ì$+MUL04$-TÎ

Slave 4

Ì$+MUL05$-[Î

Slave 5

Ì$+MUL06$-bÎ

Slave 6

Ì$+MUL07$-iÎ

Slave 7

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata

Ì$+MUL08$-pÎ

Slave 8

Ì$+MUL09$-wÎ

Slave 9

Ì$+MUL10$->Î

Slave 10

Ì$+MUL11$-EÎ

Slave 11

Ì$+MUL12$-LÎ

Slave 12

Ì$+MUL13$-SÎ

Slave 13

Ì$+MUL14$-ZÎ

Slave 14

Ì$+MUL15$-aÎ

Slave 15

Setup Procedure Using Programming Barcodes

ID-NET™ M/S Multidata

Ì$+MUL16$-hÎ

Slave 16

Ì$+MUL17$-oÎ

Slave 17

Ì$+MUL18$-vÎ

Slave 18

Ì$+MUL19$-}Î

Slave 19

Ì$+MUL20$-DÎ

Slave 20

Ì$+MUL21$-KÎ

Slave 21

Ì$+MUL22$-RÎ

Slave 22

Ì$+MUL23$-YÎ

Slave 23

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Datalogic Lecteur de codes-barres

Datalogic

Datalogic Touch 65 Pro Manuel utilisateur

Datalogic

Datalogic POWERSCAN 7000 2D Imager Manuel utilisateur

Datalogic

Datalogic Gryphon 2D Series Manuel utilisateur

Datalogic

Datalogic PowerScan D8330 Manuel utilisateur

Datalogic

Datalogic QuickScan QM2430-BK-433K2 Manuel utilisateur

Datalogic

Datalogic Gryphon D432 Manuel utilisateur

Datalogic

Datalogic DL9600 Viper Manuel utilisateur

Datalogic

Datalogic Dragon D151 Manuel utilisateur

Datalogic

Datalogic Gryphon I GD44XX Manuel utilisateur

Datalogic

Datalogic QuickScan QBT2400 Manuel utilisateur

Datalogic

Datalogic Gryphon GFE4400 Guide de configuration rapide

Datalogic

Datalogic Gryphon I GM410X Manuel utilisateur

Datalogic

Datalogic PowerScan PM8300-DK Manuel utilisateur

Datalogic

Datalogic DX8210 Manuel utilisateur

Datalogic

Datalogic Magellan 9300i Manuel utilisateur

Datalogic

Datalogic Magellan 800i Manuel utilisateur

Datalogic

Datalogic QuickScan QS2500 Manuel d'installation et d'exploitation

Datalogic

Datalogic QuickScan QD2430 Manuel utilisateur

Datalogic

Datalogic Gryphon DX30 Manuel utilisateur

Datalogic

Datalogic Gryphon I GFE4500 Manuel d'installation et d'exploitation

Datalogic

Datalogic DS5100 Manuel utilisateur

Datalogic

Datalogic Dragon D131 Manuel utilisateur

Datalogic

Datalogic DX6400 Manuel utilisateur

Datalogic

Datalogic Gryphon I GBT4400 Manuel d'installation et d'exploitation

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur

Atid

Atid AT188N Plus Manuel utilisateur