Datalogic MAGELLAN 8400 Manuel utilisateur

1x 1x 1x

MagellanTM 83/8400 Calibration Process Quick Reference Sheet

1 2 3 4

5 6 7 8

Ensure that the Scanner-

Scale is powered-on (the

green top LED and orange

>0< button will be lit or

flashing).

Return the wire lift handle

to its down position and

replace the Top Platter. (If

the Top Platter does not

seat correctly, recheck to

see that the lift handle is

fully retracted.)

After ensuring the platter

is fully seated, press &

release the flashing >0<

button once. Wait for the

scanner to sound two

beeps. (The >0< button

will continue to flash.)

Place 20 lbs. of certified

weights on the platter and

press & release the >0<

button once. The scanner

will emit a trill sound upon

registering the weight.

Remove the weights from

the platter and press &

release the >0< button once

to complete the calibration

sequence. The scanner will

reset and the >0< button

will light steadily.

Remove the Top Platter

from the scanner-scale,

and locate the switch

door.

Open the calibration door

cover by pushing back

towards the optics

chassis. (It may be

necessary to push the

wire lift handle into the

upright position to access

the cover.)

Use your finger to reach

inside the calibration bay,

locate the small plunger

switch and press &

release it once. The

scanner will issue seven

rapid beeps and the >0<

button will begin to flash.

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U.

9Remove the platter and

push the wire lift handle

to the upright position in

preparation for sealing the

calibration door.

10 Fully close the calibration

door and apply the

calibration seal in accor-

dance with local require-

ments. The door is fully

closed when the holes in

the door and the metal

tab are aligned. (See

Sealing Notes.)

No portion of the seal,

whether wire, paper

label or other method,

should be in contact

with the weigh frame

(shown in green) or

scale movement will be

compomised.

Lift Handle Sealing Notes

Conditions to Avoid:

Wire loop too long (not snug)

Calibration door not closed

Seal in contact with weigh frame

CALL DATALOGIC TECHNICAL SUPPORT: 1-800-547-2507

VIEW THE CALIBRATION VIDEO AT: http://www.youtube.com/watch?v=wHYjcTdd9Gk

IF YOU ENCOUNTER PROBLEMS OR HAVE QUESTIONS ABOUT

ANY PART OF THE CALIBRATION PROCESS:

820061014 (Rev. A)October 2013

Autres manuels pour MAGELLAN 8400

Ce manuel convient aux modèles suivants

Autres manuels Datalogic Lecteur de codes-barres

Datalogic

Datalogic Gryphon I GFS4400 Manuel utilisateur

Datalogic

Datalogic matrix 450N Manuel utilisateur

Datalogic

Datalogic MAGELLAN 3200VSI Manuel utilisateur

Datalogic

Datalogic GRYPHON D Series Manuel utilisateur

Datalogic

Datalogic PD9330 Manuel d'installation et d'exploitation

Datalogic

Datalogic Gryphon I GD44XX Manuel utilisateur

Datalogic

Datalogic Gryphon I GBT4400 Manuel utilisateur

Datalogic

Datalogic PowerScan PD96 Series Manuel d'installation et d'exploitation

Datalogic

Datalogic OM-DRAGON Series Manuel utilisateur

Datalogic

Datalogic Heron D110 Manuel utilisateur

Datalogic

Datalogic QuickScan QM24XX Manuel utilisateur

Datalogic

Datalogic Magellan 8500Xt Manuel utilisateur

Datalogic

Datalogic DS8110 Manuel utilisateur

Datalogic

Datalogic DLL5100 Series Manuel utilisateur

Datalogic

Datalogic DS6400 Manuel utilisateur

Datalogic

Datalogic PowerScan RF SR Manuel utilisateur

Datalogic

Datalogic QuickScan QM2400 Manuel utilisateur

Datalogic

Datalogic Magellan 2200VS Manuel utilisateur

Datalogic

Datalogic PowerScan D8330 Manuel utilisateur

Datalogic

Datalogic Quickscan I Manuel utilisateur

Datalogic

Datalogic MAGELLAN 1400I Manuel utilisateur

Datalogic

Datalogic Matrix 300N Manuel utilisateur

Datalogic

Datalogic DS8100A Manuel utilisateur

Datalogic

Datalogic MAGELLAN 3200VSI Manuel utilisateur

Manuels Lecteur de codes-barres populaires d'autres marques

POSMicro

POSMicro Datalogic PowerScan D7100 Manuel utilisateur

Marson

Marson MT780 Guide de configuration rapide

NCR

NCR RealPOS Manuel utilisateur

Motorola

Motorola SE3300 Guide de configuration rapide

Element

Element P130BT Manuel utilisateur

Motorola

Motorola Symbol LS3008 Manuel d'installation et d'exploitation

Meec tools

Meec tools OBD-II / VAG Manuel utilisateur

SICK

SICK CLP 100 Manuel utilisateur

Royal Tag SA

Royal Tag SA I-Read Manuel utilisateur

Welch Allyn

Welch Allyn IMAGETEAM 3800 Manuel utilisateur

Meteor

Meteor 8310 Manuel utilisateur

Denso

Denso BHT-500B Manuel utilisateur

Motorola

Motorola MP6000 Instructions de montage

Newland

Newland NLS-HR15-BT Manuel utilisateur

ARTDEV

ARTDEV AS-1310 Manuel utilisateur

Aopos

Aopos AS290 Manuel utilisateur

ENS

ENS 367-5455 Manuel utilisateur

Atid

Atid AT188N Plus Manuel utilisateur