Data Video RMC-120 Manuel utilisateur
2005/1/4
Ethernet Control Box
for SE-800
RMC-120
錯誤!
USER MANUAL
Http://www.datavideo-tek.com
1
Warnings and Precautions
1. Read all of these warnings and save them for later reference.
2. Follow all warnings and instructions marked on this unit.
3. Unplug this unit from the wall outlet before cleaning. Do not
use liquid or aerosol cleaners. Use a damp cloth for cleaning.
4. Do not use this unit in or near water.
5. Do not place this unit on an unstable cart, stand, or table. The
unit may fall, causing serious damage.
6. Slots and openings on the cabinet top, back, and bottom are
provided for ventilation. To ensure safe and reliable operation
of this unit, and to protect it from overheating, do not block or
cover these openings. Do not place this unit on a bed, sofa,
rug, or similar surface, as the ventilation openings on the
bottom of the cabinet will be blocked. This unit should never
be placed near or over a heat register or radiator. This unit
should not be placed in a built-in installation unless proper
ventilation is provided.
7. This product should only be operated from the type of power
source indicated on the marking label of the AC adapter. If
you are not sure of the type of power available, consult your
Datavideo dealer or your local power company.
8. Do not allow anything to rest on the power cord. Do not locate
this unit where the power cord will be walked on, rolled over,
or otherwise stressed.
9. If an extension cord must be used with this unit, make sure
that the total of the ampere ratings on the products plugged
into the extension cord do not exceed the extension cord’s
rating.
10. Make sure that the total amperes of all the units that are
plugged into a single wall outlet do not exceed 15 amperes.
2
11. Never push objects of any kind into this unit through the
cabinet ventilation slots, as they may touch dangerous
voltage points or short out parts that could result in risk of fire
or electric shock. Never spill liquid of any kind onto or into this
unit.
12. Except as specifically explained elsewhere in this manual, do
not attempt to service this product yourself. Opening or
removing covers that are marked “Do Not Remove” may
expose you to dangerous voltage points or other risks, and
will void your warranty. Refer all service issues to qualified
service personnel.
13. Unplug this product from the wall outlet and refer to qualified
service personnel under the following conditions:
a. When the power cord is damaged or frayed;
b. When liquid has spilled into the unit;
c. When the product has been exposed to rain or water;
d. When the product does not operate normally under
normal operating conditions. Adjust only those
controls that are covered by the operating instructions
in this manual; improper adjustment of other controls
may result in damage to the unit and may often
require extensive work by a qualified technician to
restore the unit to normal operation;
e. When the product has been dropped or the cabinet
has been damaged;
f. When the product exhibits a distinct change in
performance, indicating a need for service.
3
Table of Contents
Warnings and Precautions …... …... …... …... …... …... …... …..1
Warnings and Precautions
What's in the Box……………..……….………………...…...……….4
Introduction……………………………………...……………..………5
Introduction
Product overview
Features…………………………………………………..….………...6
User Interface Functions……………………………..……….……...7
Installation, Connections, Set up…………………………..……....14
Connections
PC IP setting
RMC-120 IP setting
SE-800 IP setting
Troubleshooting…………………….…………..…………...……....22
No connection
FAQ……………………………………………..………..….………..23
Specification…………..………………………..………..….……….25
Technical Support...…………………………………….…………...26
4
What’s in the box?
1. RMC-120
2. AC / DC Power Adaptor * 1
3. RJ45 Ethernet cable 1M * 1
(cross over)
4. RS-232 cable 1.2M * 1
5. User manual
6. Installation CD
5
Introduction
Thank you for purchasing Datavideo’s RMC-120. RMC-120 is
one of SE-800 accessories, which can be used to remote
control SE-800 via RS-232 command with a simple, but
unique operate control interface. You will be amazed and
pleased at what you can do with this advanced piece of
technology. In order to bring out the maximum performance
of this unit, we recommend that you spend some time to read
this manual carefully.
Product Overview
RMC-120 is special designed for SE-800 control by Ethernet.
Now you can remote control shots, mix, and edit, all within
the SE-800 RS-232 protocol. RMC-120 is a simple RJ45 to
RS-232 device, featuring powerful software that allows you to
use your PC or laptop as a control center.
What is the benefit of using that? For example, you could use
it in remote areas, where could be far away from your
switcher as long as you have internet connection.
The full size control panel includes most control functions of
SE-800, which includes video selection, audio selection,
video effects, transition effects, color corrections and RGB
corrections. Also, it includes 30 user programmable macro
function keys that let you play back preset transitions and
effects instantly by clicking a single button.
6
Features
Standard RJ 45 and RS-232 connectors
Easy to install
Simply connection
Full functions remote control
Friendly user interface
7
User Interface Functions
1. Joy stick and mode selector
2. Voice sync adjustment
3. Video input format selector
4. Audio channel selectors
5. Audio follow video switch
6. Color processor
7. Border control
8. Background control
9. Transition source selectors
10. GPI function on/off button
11. Play F1 to F30 by sequence
12. Take function key
13. T-Bar
14. Main video source selectors
15. Sub video source selectors
16. Chroma key control
17. Preset Banks F1 to F30
18. Video effects: Picture in Picture
19. Video effects: Paint controls
20. Video effects: Mosaic controls
21. Numeric Keypad
22. Transition effects.
25. Audio channel selectors
16
18 13
14
17 12
16
7
9
10
19
20
23
11
15
5
8
21
22
23
4
8
1. Joystick and Joystick mode selector: The Joystick control
can function either in RGB Color Correction mode or
Position Control mode, depending on the position of the
selector below it. In RGB Correction mode, you can make
real time RGB white balance corrections to the Main
Source video. This function (white balance adjustment) is
effective only with “Input Format selection” mode. In
Position Control mode, the joystick
is used to position the selected
effect (Mosaic or Picture In Picture)
anywhere on the screen in real time.
2. Voice Sync: adjusts for audio delay
or advance from –19 to +3 frames
for the Audio Input that is fed from
the selected Video channel.
3. Input Format selectors: These buttons allow you to select
the input video format for each channel. To operate,
press the upper button to select the channel (each press
cycles the LED to the next channel),
then press the lower button to select
the proper format. Disengage the
selectors by pressing a button in
any other section on the front panel.
4. Audio Input Selectors: Controls which audio input channel
(A, B, C, and/or D) is sent to the Audio Bus “Video”
channel in SE-800. The row of selector buttons across
the top of this section has LEDs to show which input
channel is active. If the A+V function
(5.) is engaged, the source channel
9
selected on the Main Source bus is automatically
selected. If A+V is not engaged, the input source is user
selectable. Level controls for each input source are the
rotary pots below the selection buttons.
5. A+V: Audio follow video switch. When this button is
engaged (you’ll know it is engaged because the LED is
lit), the audio associated with a selected input source
automatically follows the video through the
dissolve. When the button is inactive, audio
must be switched manually.
6. Color Processor: These controls become active in
conjunction with the Input Format selector (3.). When that
control is active, you can make adjustments to the
selected channel’s brightness, contrast, color, and tint
(NTSC only) by pressing the up and down arrow buttons.
The LEDs on the left side of this section indicate relative
steps above or below unity (the signal exits the control
unchanged). Press and hold the Reset button in the
upper right for 2 seconds or more to reset the Color
Processor controls
all to unity. The
“Reset All” button
resets the color
correction and RGB
correction settings
for all 4 inputs.
Table des matières
Autres manuels Data Video Changer
Data Video
Data Video SE-2800 Manuel utilisateur
Data Video
Data Video OBV-2850 Manuel utilisateur
Data Video
Data Video ITC-100 KF1000 Manuel utilisateur
Data Video
Data Video SE-1200MU Manuel utilisateur
Data Video
Data Video RP-54 Manuel utilisateur
Data Video
Data Video SE-2000R Manuel utilisateur
Data Video
Data Video HS-1600T Manuel utilisateur
Data Video
Data Video HS-1200 Manuel utilisateur
Data Video
Data Video SE-600 Manuel utilisateur
Data Video
Data Video SE-2800 Manuel utilisateur
Data Video
Data Video SE-500 Manuel utilisateur
Data Video
Data Video DAC-200 Manuel utilisateur
Data Video
Data Video SE-2800 Manuel utilisateur
Data Video
Data Video iCast 10NDI Manuel utilisateur
Data Video
Data Video SE-2850 Manuel utilisateur
Data Video
Data Video SE-900 Manuel utilisateur
Data Video
Data Video SE-2200 Manuel utilisateur
Data Video
Data Video SE-600 Manuel utilisateur
Data Video
Data Video SE-500MU4K Manuel utilisateur
Data Video
Data Video SE-3000 Manuel utilisateur
