Daspi DS 301 RX WIFI Manuel utilisateur
DS 301 RX WIFI
DS301 RX WIFI MANUAL
1. RX WiFi
2. Linking a device with the RX WIFI.
1- Download the “DASPI” App on:
3- Press on “Add Device”
2- Create an account and
register.
DS 301 RX WIFI
4- Choose the kind of device to be added. In this case: “Receptor”
5- Check the device is connected to the power and then press on
“Confirm indicator rapidly blink”
6- Connect your phone to the Wi-Fi network the receiver will work
with.
DS 301 RX WIFI
7- Choose the Wi-Fi network on the App and introduce the
password to let the receiver what network should use. Press “Confirm”.
8- Keep pressed the button “S1” on the receiver for few seconds
until the red LED starts flashing.
DS 301 RX WIFI
9- The receiver has been correctly added. Press “Done”
10- Once the receiver has been added, we can control de device with
the smartphone.
3. How to add another user.
3.1. Select on “edit”.
DS 301 RX WIFI
3.2 Now choose the option listed as “share device.”
3.3 Select “add sharing”
DS 301 RX WIFI
3.4 Here you have to enter the region and phono number of the user.
3.5 Click on “Done” to finish.
4. Deleting the stored data in the memory card:
If button S1 or S2 is pressed for few seconds the corresponding LED
will remain on. Keep the button pressed until it turns off, then the data
will be completely deleted (remotes and connected devices).
ATTENTION: The deleted data cannot be recovered.
5. Picture of the product
Location of the LEDs and buttons.
BUTTONS
DS 301 RX WIFI
6. CONECTION WITH MAGNETIC CONTACT
7. Connect your device with Amazon Alexa and Apple Siri:
To know how to connect your device be sure to visit our App page on
our website “daspi.it”
Autres manuels Daspi Système de contrôle
