DANIEL 2500 Instructions de montage
MODEL 2500
INSTRUMENTATION
SYSTEM
__________________________________________
USER REFERENCE MANUAL
DANIEL MEASUREMENT AND CONTROL
HOUSTON, TEXAS
Part Number: 3-9000-591
Revision 5 Series
Revision H
NOVEMBER 1998
Year 2000 Warranty
The Company represents and warrants that computer programs in any medium, software,
firmware and combinations thereof (“Deliverables”) manufactured by the Company and
incorporated into or supplied by the Company for use with goods manufactured by the Company
will, under normal use and care:
i) recognize and accept dates falling on or after 1 January 2000;
ii) recognize and accept the year 2000 and every succeeding fourth year as leap
years;
iii) recognize and accept 29 February in the year 2000 and every succeeding fourth
year;
iv) record, store, process, sequence, present and output calendar dates and data related
to dates falling on or after 1 January 2000, in the same manner and with the same
functionality as they do on or before 31 December 1999 and without errors or
omissions; and
v) lose no functionality with respect to the introduction into them of dates or data
related to dates falling on or after 1 January 2000;
provided that, in the case of any non-conforming Deliverables that are returned to the Company
promptly following discovery of the non-conformity, the Company will, at its option and cost,
repair or replace such Deliverable or refund to the Purchaser the purchase price therefor. This
shall be the Purchaser's sole and exclusive remedy for breach of the foregoing warranty.
Notwithstanding the foregoing, the Company shall not, under any circumstances whatsoever, be
liable for any defects or errors caused by: materials or workmanship made, furnished or specified
by the Purchaser; non-compliance with the Company's installation or operation requirements;
failure to install any revisions and/or upgrades to the Deliverables deemed mandatory by the
Company; any modifications to Deliverables not previously authorized by the Company in
writing; the use by the Purchaser of any non-authorized spare or replacement parts in connection
with the goods used in conjunction with the Deliverables; or the use of the Deliverables with any
hardware or software not supplied by the Company. The Purchaser shall at all times remain
solely responsible for the adequacy and accuracy of all information supplied by it. Any third
party content in Deliverables shall carry only the warranty extended by the original manufacturer.
THE FOREGOING CONSTITUTES THE COMPANY'S SOLE AND EXCLUSIVE
WARRANTY IN RELATION TO THE PERFORMANCE OF THE DELIVERABLES AS IT
RELATES TO THE CHANGE FROM YEAR 1999 TO YEAR 2000 OR THE OCCURRENCE
OF LEAP YEARS THEREAFTER, AND THE PURCHASER'S EXCLUSIVE REMEDY FOR
BREACH THEREOF. IN NO EVENT WILL THE COMPANY BE LIABLE FOR INDIRECT,
CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES, INCLUDING LOSS OF USE,
BUSINESS INTERRUPTION OR LOSS OF PROFITS, IRRESPECTIVE OF WHETHER THE
COMPANY HAD NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
The foregoing warranty shall remain valid until the later of December 31, 2000 or one year after
the date that the Deliverable was shipped.
MODELMODEL 2500_______________________________________________________2500_______________________________________________________
DANIEL INDUSTRIES, INC.
MODEL 2500 INSTRUMENTATION SYSTEM
USER REFERENCE MANUAL
NOTICE
DANIEL INDUSTRIES, INC. AND DANIEL MEASUREMENT AND CONTROL ("DANIEL")
SHALL NOT BE LIABLE FOR TECHNICAL OR EDITORIAL ERRORS IN THIS MANUAL
OR OMISSIONS FROM THIS MANUAL. DANIEL MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THIS MANUAL
AND, IN NO EVENT, SHALL DANIEL BE LIABLE FOR ANY SPECIAL OR
CONSEQUENTIAL DAMAGES INCLUDING, BUT NOT LIMITED TO, LOSS OF
PRODUCTION, LOSS OF PROFITS, ETC.
PRODUCT NAMES USED HEREIN ARE FOR MANUFACTURER OR SUPPLIER
IDENTIFICATION ONLY AND MAY BE TRADEMARKS/REGISTERED TRADEMARKS OF
THESE COMPANIES.
COPYRIGHT © 1998
BY DANIEL MEASUREMENT AND CONTROL
HOUSTON, TEXAS, U.S.A.
All rights reserved. No part of this work may be reproduced or
copied in any form or by any means - graphic, electronic or
mechanical - without first receiving the written permission of
Daniel Measurement and Control, Houston, Texas, U.S.A.
________________________________________________________________________________________________________________________________________
PREFACEPREFACE i
____________________________________________________________________________________________________________ MODELMODEL 25002500
WARRANTY
Daniel Measurement and Control ("Daniel") warrants all equipment manufactured by it to be free
from defects in workmanship and material, provided that such equipment was properly selected
for the service intended, properly installed, and not misused. Equipment which is returned,
transportation prepaid to Daniel within twelve (12) months of the date of shipment (eighteen (18)
months from date of shipment for destinations outside of the United States), which is found after
inspection by Daniel to be defective in workmanship or material, will be repaired or replaced at
Daniel’s sole option, free of charge, and return-shipped at lowest cost transportation. All
transportation charges and export fees will be billed to the customer. Warranties on devices
purchased from third party manufacturers not bearing a Daniel label shall have the warranty
provided by the third party manufacturer.
Extended warranty - Models 2470, 2480 and 2500 are warranted for a maximum of twenty-four
(24) months. The Danalyzer valves are warranted for the life of the instrument and the columns
for five years.
The warranties specified herein are in lieu of any and all other warranties, express or implied,
including any warranty of merchantability or fitness for a particular purpose.
Daniel shall be liable only for loss or damage directly caused by its sole negligence. Daniel’s
liability for any loss or damage arising out of, connected with, or resulting from any breach
hereof shall in no case exceed the price allocable to the equipment or unit thereof which gives
rise to the claim. Daniel’s liability shall terminate one year after the delivery of the equipment
except for overseas deliveries and extended warranty products as noted above.
In no event, whether as a result of breach of warranty or alleged negligence, shall Daniel be
liable for special or consequential damages, including, but not limited to, loss of profits or
revenue; loss of equipment or any associated equipment; cost of capital; cost of substitute
equipment, facilities or services; downtime costs; or claims of customers of the purchaser for
such damages.
________________________________________________________________________________________________________________________________________
PREFACEPREFACE
ii
MODELMODEL 2500_______________________________________________________2500_______________________________________________________
SECTION 1
INTRODUCTION ........................................ 1
MODEL 2500 HARDWARE ................................. 3
MODEL 2500 SOFTWARE ................................. 6
SECTION 2
CONTROL AND DISPLAY DEVICES ......................... 7
MODEL 2500 LED STATUS LIGHTS ......................... 8
MODEL 2500 DISPLAY SCREEN ............................ 9
MODEL 2500 KEYPAD ................................... 10
MODEL 2500 REMOTE FRONT PANEL ..................... 11
SECTION 3
STARTUP AND APPLICATION DOWNLOAD ................. 13
INITIALIZING SEQUENCE ............................... 14
TEST MALFUNCTIONS .................................. 15
FILE TYPES ........................................... 17
MEMORY RESIDENT SOFTWARE ......................... 18
HARD DRIVE USE ...................................... 19
DOWNLOADING INSTRUCTIONS .......................... 20
________________________________________________________________________________________________________________________________________
TABLETABLE OFOF CONTENTSCONTENTS iii
____________________________________________________________________________________________________________ MODELMODEL 25002500
SECTION 3 (continued)
LOAD2500 - STAND-ALONE DOWNLOAD PROGRAM ......... 29
STAND-ALONE DOWNLOAD PROGRAM EXAMPLES .......... 30
SYSTEM READY ....................................... 32
DATA ENTRY SECURITY ................................. 32
SECURITY SWITCH .................................... 33
LOWER-LEVEL SECURITY PASSWORD .................... 34
RESTRICTED-USER PASSWORD .......................... 35
DATA ENTRY AT INITIAL STARTUP ....................... 36
PROCEDURE OF DATA ENTRY AT INITIAL STARTUP ........ 37
TYPICAL START-UP DATA CHANGES ...................... 40
TIME-OF-DAY CLOCK CHIP ............................. 41
________________________________________________________________________________________________________________________________________
TABLETABLE OFOF CONTENTSCONTENTS
iv
MODELMODEL 2500_______________________________________________________2500_______________________________________________________
SECTION 4
MENU SELECTION ..................................... 43
MAIN MENU .......................................... 44
SUB-MENUS ........................................... 45
INPUT CHANNELS ................................. 46
OUTPUT CHANNELS ............................... 46
ALARMS ......................................... 47
OPERATOR ENTRY ................................ 47
CALCULATIONS ................................... 48
REPORTS ........................................ 48
TABLES .......................................... 49
TUBE SWITCHING ................................. 49
MODBUS MASTER ................................. 51
SERIAL PORTS .................................... 52
ARCHIVE ........................................ 56
SYSTEM COMMANDS .............................. 56
MENU DISPLAY AND SELECTION PROCEDURE ............. 60
________________________________________________________________________________________________________________________________________
TABLETABLE OFOF CONTENTSCONTENTS v
____________________________________________________________________________________________________________ MODELMODEL 25002500
SECTION 4 (continued)
MENU FLOW CHART DIAGRAMS ......................... 63
11 SUB-MENUS CHART ............................. 64
INPUT CHANNELS CHART .......................... 65
OUTPUT CHANNELS CHART ......................... 66
ALARMS CHART .................................. 67
OPERATOR ENTRY CHART .......................... 68
CALCULATIONS CHART ............................ 69
REPORTS CHART ................................. 70
TABLES CHART ................................... 71
TUBE SWITCHING CHART .......................... 72
MODBUS MASTER CHART .......................... 73
SERIAL PORTS CHART A ........................... 74
SERIAL PORTS CHART B ........................... 75
ARCHIVE CHART ................................. 76
SYSTEM COMMANDS CHART ....................... 77
________________________________________________________________________________________________________________________________________
TABLETABLE OFOF CONTENTSCONTENTS
vi
Table des matières
Autres manuels DANIEL Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
