10
Danalock Universal Module V3-BT
Product speci cations
Supply Voltage Via USB 12V DC, 1A
Temperature
range
Active operating mode -20ºC to +40ºC
Storage 5ºC to +50ºC
Mechanical
speci cations
Dimensions (W x H x L) 17 mm x
38 mm x 35 mm
Weight 14 g
Material Plastic Black PP
Radio interfaces Bluetooth LE Max.5.1 dBm
E.I.R.P
US and Canada certi cation marks
This device contains radio transmitters that comply with CFR
47 part 2.1091, part 15.207, Part 15.247 of the FCC rules
and with RSS-GEN, RSS-102 and RSS-247 of Industry Canada
requirements
Notice statements according to CFR 47 Part 15.19 /
RSS-GEN:
The device complies with Part 15 of the FCC rules and with
Industry Canada license
exempt standard(s). Operation is subject to the following two
conditions:
1 This device may not cause harmful interference, and
2 This device must accept any interference received, including
interference that may cause undesired operation.
Déclarations selon le CFR 47 section 15.19 / RSS-GEN:
Le présent appareil est conforme aux CNR d’Industrie Canada
applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:
1 l’appareil ne doit pas produire de brouillage, et
2 l’utilisateur de l’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
NOTICE statements according to CFR 47 Part 15.21:
Changes or modi cations made to this equipment not expressly
approved by Danalock Aps may void the FCC authorization to
operate this equipment.
Statements according to CFR 47 Part 2.1091 and RSS-102:
With respect to radiofrequency radiation exposure Information
it is declared that this equipment complies with FCC radiation
exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum
distance of 20 cm between the radiator and your body.
This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Déclarations selon le CFR 47 Sections 2.1091 et RSS-102:
Respectant les informations relatives à l’exposition aux radiations de
fréquences radio, on déclare que cet équipement respecte les limites
d’exposition aux radiations de la FCC aux conditions prévues pour
un environnement non contrôlé.
Cet équipement doit être installé et fonctionner à une distance
minimale de 20 cm entre l’appareil irradiant et votre corps.
Cet émetteur ne doit pas être installé ou utilisé en conjonction avec
d’autres antennes ou d’autres émetteurs.
FCC part 15B note
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit diff erent
from that to which the receiver is connected.
Japan
The product is approved in Japan with the certi cate ID n°:
[R] 204-720646
This device is granted pursuant to the Japanese Radio Law (
電波法)
=当該機器には電波法に基づく、技術基準適合証明等を受けた特
定無線設備を装着
している
This device should not be modi ed (otherwise the granted
designation number will become invalid)
本製品の改造は禁止されています。（適合証明番号などが無効
と な り ま す 。)
RoHS
2011/65/EU
Amendment
2015/863/EU
FCC ID: 2ADSH-UMV3BT
IC:12588A-UMV3BT 204-720646
