Daikin BRC1E63 Manuel utilisateur

BRC1E63

WIRED REMOTE

CONTROLLER

OPERATION MANUAL

•Thank you for purchasing this product.

•This manual describes safety precautions required for the use of the

product.

Read this manual carefully and be sure you understand the

information before using the product.

Keep this manual where it is readily accessible after reading it through.

If another user operates the product in the future, be sure to hand over

this manual to the new user.

Refer to the operation manuals attached to the indoor and outdoor units,

etc.

Safety Precautions

Children should be supervised to ensure that they do not play with the product.

Read the safety precautions carefully for the proper use of the product.

•This manual classiﬁes the precautions into WARNINGS and CAUTIONS.

Be sure to follow all the precautions below: They are all important for ensuring safety.

WARNING Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

It may also be used to alert against unsafe practices.

WARNING

•Do not install the remote controller by yourself.

Consult your local dealer.

•Do not modify or repair the remote controller.

Consult your local dealer.

•Do not relocate or reinstall the remote controller by yourself.

Consult your local dealer.

•

product.

•Do not wipe the product with benzine, thinner, chemical dustcloth, etc.

The product may get discolored or the coating peeled off.

–Items to be Strictly Observed–

CAUTION

•Do not allow children to play with the remote controller.

Accidental operation by children may result in health impairment.

•Do not disassemble the product.

Consult your local dealer for internal inspections and adjustments.

•Do not press the button of the remote controller with a hard, pointed object.

The remote controller may be damaged.

•Do not pull or twist the electric wire of the remote controller.

It may cause the unit to malfunction.

•

•Do not wash the remote controller.

•Do not locate the remote controller wherever there is a risk of wetting.

If water gets into the remote controller there is a risk of electric leakage and damage to electronic

components.

Disposal requirements

Your product and the batteries supplied with the

controller are marked with this symbol. This symbol

means that electrical and electronic products and

batteries shall not be mixed with unsorted household

waste.

For batteries, a chemical symbol can be printed beneath

the symbol. This chemical symbol means that the battery

contains a heavy metal above a certain concentration.

Poss ble chemical symbols are:

Pb: lead (>0.004%)

Do not try to dismantle the system yourself: the

dismantling of the product, treatment of the refrigerant, of

oil and of other parts must be done by a qualiﬁed installer

in accordance with relevant local and national legislation.

Units and waste batteries must be treated at a

specialized treatment facility for re-use, recycling and

recovery.

By ensuring correct disposal, you will help to prevent

potential negative consequences for the environment

and human health.

Please contact the installer or local authority for more

information.

Button Location and Descriptions

3. Menu/Enter button

8. ON/OFF button

10. Cancel button

9. Operation lamp

(Green)

11. LCD (with backlight)

4. Up button

5. Down button

6. Right button

7. Left button

1. Mode Selector button

NOTE

•Do not press the buttons on the remote controller with a hard, pointed objects.

Otherwise, the remote controller may be damaged or malfunction.

Basic operations (i.c., ON/OFF, Operation Mode, Airﬂow Rate

(Airﬂow level/Fan Speed), Airﬂow Direction and Set Temperature)

are manipulable directly by the above button.

Advanced settings are manipulable from the Menu screen displayed

by the Menu/Enter button.

1. Mode Selector button

•Use to select the operation mode of your

preference. (Refer to page10.)

* Available modes vary with the connecting

model.

•

vary with the connecting model.

3. Menu/Enter button

•Used to indicate the Main Menu.

(Refer to page21for the menu items.)

•Used to enter the setting item selected.

4. Up button “ ”

•Used to raise the set temperature.

•Use to highlight the item above the current

selection.

(The highlighted items will be scrolled

continuously when the button is kept

pressed.)

•Used to change the item selected.

* Be sure to press the part with the symbol

“”

5. Down button “ ”

•Used to lower the set temperature.

•Use to highlight the item below the current

selection.

(The highlighted items will be scrolled

continuously when the button is kept pressed.)

•Used to change the item selected.

* Be sure to press the part with the symbol

“ ”

6. Right button “ ”

•Used to highlight the next items on the

right-hand side.

•Display contents are changed to next

screen per page.

* Be sure to press the part with the symbol

“ ”

7. Left button “ ”

•Used to highlight the next items on the

left-hand side.

•Display contents are changed to previous

screen per page.

* Be sure to press the part with the symbol

“ ”

8. ON/OFF button

•Press this button and system will start.

•Press this button again and system will

stop.

9. Operation lamp (Green)

•This lamp lights up during operation.

•This lamp blinks if a malfunction occurs.

10.Cancel button

•Used to return to the previous screen.

11.LCD (with backlight)

•The backlight will be lit for approximately

30seconds by pressing any operation

button. Press the button while the backlight

is lit. (Excluding the ON/OFF button)

•If 2remote controllers are used to control a

single indoor unit, the backlight of the

Used to indicate the Airﬂow Rate

(Airﬂow level/Fan Speed)/Airﬂow Direction

screen. (Refer to page 11.)

Names and Functions

Basic Screen

•Basic screen are two types of Standard display screen and Detailed display screen.

The Standard display screen is set by default.

•

To switch to the Detailed display, select the “Detailed” in the Main Menu. (Refer to

page56.)

•The contents on the screen vary with the operation mode of the connecting model.

(The following display will appear when the air conditioner is in Automatic operation.)

Standard display screen

Auto

This function not available

1.Operation mode

12.Setback

8.Key Locked

6.Message

9.Timer Enabled

Set to

Cool

Heat

28°C

20°C

Ventilation/Air purifying

10.Centralized Control

11.Changeover Under Control

4.Set/Setback

Temperature display

5.Defrost/Hot start

Airﬂow Rate (Airﬂow

level/Fan Speed)

3.Airﬂow Direction

(Displayed only when the air

conditioner is in operation.)

Detailed display screen

The clock, and selectable display items appear on the detailed

display screen in addition to the items appearing on the standard

display screen.

Room

20°C

Auto

Cool

Heat 35

°C

Setback

Fr i

11:03

14.

Selectable Display Item

(with room

temperature selected)

13.Clock (12/24 hour

time display)

Set/Setback

Temperature display

Auto

Cool

Heat

°C

Set to

2.Airﬂow Rate

(Airﬂow level/Fan

Speed) is not appear

(No airﬂow rate

control function)

13. Clock

(No clock setting)

3.Airﬂow Direction

is not appear

(No airﬂow direction

function)

15. Timer Disabled/

Reset Clock

14.Selectable Display

Item

(No selectable display

item selected)

1. Operation Mode

•Displays the present operation mode,

“Cool”, “Heat”, “Vent”, “Fan”, “Dry” or “Auto”.

•

indoor unit.

•

control function.

3. ”

•

swing are set (Refer to page12).

•This icon is not displayed if the indoor unit

directions.

4. Set/Setback Temperature display

•When the air conditioner is turned on, “Set

to” indicates the set temperatures that are

set for the air conditioner.

•When the air conditioner is turned off,

“Setback” indicates the setback

temperatures that are set for the air

conditioner.

5. Defrost/Hot start “ ”

(Refer to page13.)

Displays if the Defrost/Hot start operation is active.

If ventilating operation “ ” is displayed:

•Displayed when a Heat Reclaim Ventilator

is connected.

For details, refer to the Operation Manual of

the Heat Reclaim Ventilator.

6. Message

The following messages are displayed.

“This function not available.”

•Displayed for a few seconds when an

operation button is pressed and the indoor

unit does not have the corresponding

function.

•If a number of indoor units are in operation,

the message will appear only if none of the

indoor units is provided with the

corresponding function, i.e., the message

will not appear if at least one of the indoor

units is provided with the corresponding

function.

“Error: Push Menu button”

“Warning: Push Menu button”

•Displayed if an error or warning is detected

(Refer to page 67).

“Quick Start” (Split system only)

•Displayed if the quick cooling/heating

function is turned on (Refer to page30).

“Time to clean element”

•

or element has come (Refer to

page65).

7. Ventilation/Air Purifying

•Displayed when a Heat Reclaim Ventilator

is connected.

•Ventilation Mode icon. “ ”

These icons indicate the current ventilation

mode (Heat Reclaim Ventilator only)

(AUTOMATIC, ENERGY RECLAIM

VENTILATION, BYPASS).

•Air purifying icon “ ”

This icon indicates that the Air Purifying

unit (optional accessory) is in operation.

8. Key Locked “ ”

(Refer to page20.)

•Displayed when the key lock is set.

9. Timer Enabled “ ”

(Refer to page40 and 48.)

•Displayed if the Schedule timer or

OFF timer is enabled.

2. Airﬂow Rate (Airﬂow level/

Fan Speed)

10.Centralized Control “ ”

•Displayed if the system is under the

management of centralized control

equipment (optional accessories) and the

operation of the system through the remote

controller is prohibited.

11.Changeover Under Control “ ”

(VRV only)

•Displayed if the remote controller has no

cool/heat selection eligibility. (Refer to

page18).

12.Setback “ ” (Refer to page16.)

•The setback icon blinks when the air

conditioner is turned on under the setback

control.

13.Clock (12/24hours time display)

•Displayed when the clock is set (Refer to

page60).

•If the clock is not set, “ -- : -- ” will be

displayed.

14.Selectable Display Item

•Displayed when the detailed display is

selected (Refer to page56).

•No detailed items are selected by default.

15.Timer Disabled/Reset Clock “ ”

•Displayed when the clock needs to be

reset.

•The schedule timer function will not work

unless the clock is reset.

Table des matières

Autres manuels Daikin Télécommande

Daikin

Daikin BRC230Z4B Manuel utilisateur

Daikin

Daikin ARC433A51 Manuel d'instructions

Daikin

Daikin BRC1H71W Manuel utilisateur

Daikin

Daikin BRC1H519K Guide de l'utilisateur

Daikin

Daikin BRC1H81K Manuel utilisateur

Daikin

Daikin BRC1H63K Manuel utilisateur

Daikin

Daikin BRC082A41W Manuel utilisateur

Daikin

Daikin BRC1C71 Guide des dimensions

Daikin

Daikin 3P419248-1-KA Manuel utilisateur

Daikin

Daikin BRC1H62W Manuel utilisateur

Daikin

Daikin VRVWII RWEYQ10MY1 Manuel utilisateur

Daikin

Daikin BRC1H81S7 Manuel d'installation et d'exploitation

Daikin

Daikin FTXN-L9 Manuel utilisateur

Daikin

Daikin 4PW71247-1-KAD Manuel utilisateur

Daikin

Daikin GS02 Manuel utilisateur

Daikin

Daikin G17 Manuel utilisateur

Daikin

Daikin BRC1E52A7 Manuel utilisateur

Daikin

Daikin BRC7FA532F Manuel utilisateur

Daikin

Daikin BRC7E63W Manuel utilisateur

Daikin

Daikin BRC1H71W Manuel utilisateur

Daikin

Daikin GS02 Manuel utilisateur

Daikin

Daikin BRC1E73 Manuel utilisateur

Daikin

Daikin BRC1E73 Manuel utilisateur

Daikin

Daikin BRC301B61 Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation