D-MAX DIC-7030DV Manuel utilisateur

IR Vandal Dome Camera

사용 설명서

용서

DIC-7030DV

680TVL

MANUAL

The lightning flash with an arrowhead symbol, within an equilateral

triangle is intended to alert the user to the presence of uninsulated

dangerous voltage within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

INFORMATION - This equipment has been tested and found to comply with limits for a

Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference

when the equipment is operated in a commercial environment.

This equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instruction manual, may cause

harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in

which case the user will be required to correct the interference at his own expense.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and should conform

to all local codes

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time,

fire may be caused.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

Do not hold plug with wet hands.

■ Warning

It could cause an electric shock.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

1.Features --------------------------------- 6

2. Cable Connection & OSD Control --------------------------------- 7

3. Setup Menu Operation --------------------------------- 8

4. Troubleshooting --------------------------------- 19

5. Dimensions --------------------------------- 20

6. Specifications --------------------------------- 21

■Contents

■SONY 1/3" 480K/570K-Effective Pixel Ex-view HAD CCD II

Minimum Resolution 0.1 Lux (F1.2, 50 IRE)

■High Resolution: More than 680 TV Lines

This camera has realized high resolution of 680 TV lines using the top-notch full digital

image processing, 12 Bit A/D serial signal processing and special algorithm technologies.

■NR (Digital Noise Reduction)

The DNR technology eliminates noise thus generating a distinct and clear image.

■High Color Reproduction

White balance processing with wide-range color temperature support and high-saturation

processing.

■DAY&NIGHT

This camera has the Day/Night function which shows clear image in dark condition

■ATR (Adaptive Tone Reproduction)

Automatically this function compensates the darker areas surrounding the object to

provide naturally sharp picture and then improves contrast in bright/dark areas

■High sensitivity and high saturation signal

This camera increases the number of horizontal pixels and achieves a high saturation

signal level and high sensitivity that extends into the near infrared.

■Preset OSD(On Screen Display) menu (8 languages)

This camera supports the OSD function which is used with multi language. And so,

the camera can be controlled via selecting text displayed on the monitor screen.

■Privacy Zone

It has 8 privacy zone function to prefect private area. It is possible to maximum 8 areas

and free to adjust masking size & area

1. Features

1) Cable Connection

( DC12V Type )

(Dual Type DC12/AC24V)

2) OSD Control

① 3AXIS BRACKET

- Please loosen screws and fix tilted and panned position.

③ LENS : Vari-Focal Auto Iris Lens ( 2.8mm ~ 12.0mm / F1.2 ) with ICR OSD PCB

- SETUP button : Used for the menu display. This button can be used to confirm settings

after changing the value of the selected function or current conditions.

- UP & DOWN buttons : Used for selecting items by moving the cursor up or down on the

menu screen.

- LEFT & RIGHT buttons : Used when changing item values, by moving the cursor to the

left or right on the menu screen

2. Cable Connection & OSD Control

•Please press the SETUP button to set OSD menu. The SETUP menu is displayed like

under the picture on the monitor.

•if it has been selected. You may move up/down to use another function by up/down

buttons and change the status by pressing left/right buttons.

•After finishing all desired setting, Please select 'EXIT.

Note) If ‘ ’ appears at the mode you wish to operate, it means that there is a sub-menu

which can be selected by pressing the SETUP button.

LENS

This menu is used to select kind of the lens.

•DC

- DC: Please select, when you use DC auto iris lens

- VIDEO: please select, when you use video iris lens

•MANUAL: please select, when you use manual lens

•MODE

- AUTO: The mechanical iris is controller automatically

-CLOSE: The mechanical iris is fixed to close

-OPEN: The mechanical iris is fixed to open

•SPEED: Set the convergence speed of the mechanical

iris

SHUTTER/AGC

You can select either auto or manual shutter.

This function is used to set AE or ME.

3. Setup Menu Operation

SETUP MENU

LENS AUTO

SHUTTER/AGC AUTO

WHITEBAL ATW

BACKLIGHT OFF

PICTADJUST

ATR OFF

MOTIONDET OFF

EXIT

SAVE ALL

SETUP MENU

LENS AUTO

SHUTTER/AGC AUTO

WHITEBAL ATW

BACKLIGHT OFF

PICTADJUST

ATR OFF

MOTIONDET OFF

EXIT

SAVE ALL

•AUTO

(HIGH LUMINANCE)

- AUTO IRIS

Select this to control the shutter speed automatically.

-SHUT+AUTO IRIS

Select AE control on the medium and high brightness

side

-Brightness

Select the high and medium brightness side reference

(LOW LUMINANCE)

-AGC

Select AE control on the low-brightness side

-Brightness

Select the low brightness side reference

•MANUAL

- MODE (SHUT+AGC)

“SHUT + AGC" is the only option available for the ME

operation mode.

There are no other options.

-SHUTTER

Sets the ME shutter speed.

(1/60(1/50),1/100(1/120),1/250,1/500,1/1K,1/2K,1/4K,

1/10K)

-AGC

Sets the AGC value [dB] for ME

(6.00/12.00/18.00/24.00/30.00/36.00/42.00/44.80)

WHITE BAL

This function is used to set the white balance operation

made.

•PUSH: All pull-in

•PUSH LOCK: Hold

•ANTI CR: Color rolling suppression

SETUP MENU

LENS AUTO

SHUTTER/AGC AUTO

WHITEBAL ATW

BACKLIGHT OFF

PICTADJUST

ATR OFF

MOTIONDET OFF

EXIT

SAVE ALL

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels D-MAX Caméra de sécurité

D-MAX

D-MAX DWC-540PV Manuel utilisateur

D-MAX

D-MAX 680 TVL Manuel utilisateur

D-MAX

D-MAX DSC-300SE Manuel utilisateur

D-MAX

D-MAX 600 TVL Manuel utilisateur

D-MAX

D-MAX DCC-500D Manuel utilisateur

D-MAX

D-MAX DCC-708DV Manuel utilisateur

D-MAX

D-MAX DCC-700d Series Manuel utilisateur

D-MAX

D-MAX DCC-580D Series Manuel utilisateur

D-MAX

D-MAX DCC-601DV Manuel utilisateur

D-MAX

D-MAX DSC-230SI Manuel utilisateur

D-MAX

D-MAX DMS-200 Manuel utilisateur

D-MAX

D-MAX DSC-2000Si Manuel utilisateur

D-MAX

D-MAX 650 TVL Manuel utilisateur

D-MAX

D-MAX Superior Speed Dome Manuel d'utilisation

D-MAX

D-MAX DSC-Se5 Manuel utilisateur

D-MAX

D-MAX DHC-10SITA Manuel utilisateur

D-MAX

D-MAX DCC-528DV Manuel utilisateur

D-MAX

D-MAX Pixim Seawolf DSP Manuel utilisateur

D-MAX

D-MAX DMC Series Manuel utilisateur

D-MAX

D-MAX DCC-520DV Manuel utilisateur

D-MAX

D-MAX DCC-501DV Manuel utilisateur

D-MAX

D-MAX DMC-20SEC Manuel utilisateur

D-MAX

D-MAX DWC-548DV Manuel utilisateur

D-MAX

D-MAX DCC 600d Series Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur