D-Link DIR-620 Manuel utilisateur
Quick Installation Guide
DIR-620
Multifunction Wireless Router
Supporting WiMAX, 3G GSM/CDMA
ith Built-in S itch
DIR-620 Quick Installation Guide
BEFORE YOU BEGIN
Delivery Package
•Wireless router DIR-620
•Power adapter
•Straight-through Ethernet cable (C T 5E)
•CD-ROM with “User Manual” and “Quick Installation Guide”
•“Quick Installation Guide” (brochure)
If any of the items are missing, please contact your reseller.
!Using a power supply with a different voltage rating than the one
included will cause damage and void the warranty for this product.
Default Settings
IP address o wireless router 192.168.0.1
Username (login) admin
Password admin
Name o wireless network (SSID) DIR-620
2
DIR-620 Quick Installation Guide
System Requirements and Equipment
• computer with any operating system that supports a web browser.
• web browser to access the web-based interface of the router: Windows
Internet Explorer, Mozilla Firefox, or Opera.
• NIC (Ethernet or Wi-Fi adapter) to connect to the router.
•n 802.11b, g, or n Wi-Fi adapter to create a wireless network.
• USB modem to connect to the Internet1.
◦ WiM X USB modem to connect to the Internet via a WiM X
network.
!
Some WiM X operators require subscribers to activate their WiM X
USB modems prior to using them. Please, refer to connection
guidelines provided by your operator when concluding the agreement
or placed on its website.
◦ 3G USB modem to connect to the Internet via a 3G GSM or
CDM network.
!
Your USB modem should be equipped with an active identification
card (SIM or R-UIM) of your operator.
It is recommended to disable the PIN code check on the identification
card prior to connecting the USB modem to the router.
1 Contact your operator to get information on the service coverage and fees.
3
DIR-620 Quick Installation Guide
Supported USB Modems
GSM modems
•Huawei E150
•Huawei E1550
•Huawei E160G
•Huawei E169G
•Huawei E220
•ZTE MF626
•ZTE MF627.
CDMA modems
•nydata DU-500
•Celot CT-650.
WiMAX modem
•Samsung SWC-U200.
4
DIR-620 Quick Installation Guide
CONNECTING TO PC (OS WINDOWS XP)
PC wit Et ernet Adapter
1. Make sure that your PC is powered off.
2. Connect an Ethernet cable between any of L N ports located on the back
panel of the router and the Ethernet port of your PC.
3. To connect via a WiM X, 3G GSM or CDM network: connect your
USB modem to the USB port2 located on the front panel of the router.
!
If you need to connect or change a USB modem to another one when
the router is powered on, power off the router, connect the modem to
the USB port, and power on the router.
4. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
5. Turn on your PC and wait until your operating system is completely
loaded.
Now you should configure your PC to obtain an IP address automatically (as
DHCP client).
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2 It is recommended to a USB extension cable to connect a USB modem to the router.
5
DIR-620 Quick Installation Guide
2. In the Network Connections window, right-click the relevant Local
Area Connection icon and select the Properties line in the menu
displayed.
3. In the Local Area Connection Properties window, on the General
tab, in the This connection uses the ollowing items section, select
the Internet Protocol (TCP/IP) line. Click the Properties button.
6
DIR-620 Quick Installation Guide
4. Select the Obtain an IP address automatically radio button. Click
the OK button.
Click the ОК button. Now your computer is configured to obtain an IP address
automatically.
PC wit Wi-Fi Adapter
1. To connect via a WiM X, 3G GSM or CDM network: connect your
USB modem to the USB port3 located on the front panel of the router.
!
If you need to connect or change a USB modem to another one when
the router is powered on, power off the router, connect the modem to
the USB port, and power on the router.
2. Connect the power cord to the power connector port on the back panel of
the router, then plug the power adapter into an electrical outlet or power
strip.
3 It is recommended to a USB extension cable to connect a USB modem to the router.
7
DIR-620 Quick Installation Guide
3. Turn on your PC and wait until your operating system is completely
loaded.
4. Turn on your Wi-Fi adapter. s a rule, modern notebooks with built-in
wireless NICs are equipped with a button or switch that turns on/off the
wireless adapter (refer to your PC documents). If your PC is equipped
with a pluggable wireless NIC, install the software provided with your
Wi-Fi adapter.
Now you should configure your Wi-Fi adapter.
1. Click the Start button and proceed to the Control Panel > Network
and Internet Connections > Network Connections window.
2. Select the icon of the wireless connection and make sure that your Wi-Fi
adapter is on.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the
needed wireless network (DIR-620) and click the Connect button.
fter that the Wireless Network Connection Status window appears.
8
DIR-620 Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
1. Start a web browser.
2. In the address bar of the web browser, enter the IP address of the router
(by default, the following IP address is specified: 192.168.0.1). Press
the Enter key.
3. On the opened page, enter the username (login) and password for the
administrator account (by default, the following username and password
are specified: admin, admin). Then click the Enter button.
!
If the error “ The page cannot be displayed ” (or “ Unable to display the
page ”/“ Could not connect to remote server ”) occurs upon connecting to
the web-based interface of the router, make sure that you have properly
connected the router to your computer.
9
DIR-620 Quick Installation Guide
Right after the first access to the web-based interface you are forwarded to the
page for changing the administrator password specified by default.
Enter the new password in the Password and Con irmation fields. Then
click the Save button.
!
Remember or write down the new password for the administrator
account. In case of losing the new password, you can access the web-
based interface of the router only after restoring the factory default
settings via the hardware Reset button. This procedure wipes out all
settings that you have configured for your router.
fter successful registration the system statistics page opens. The page
displays general information on the router and its software.
The web-based interface of the router is bilingual (English/Russian). Select a
needed language from the menu displayed when the mouse pointer is over the
Language caption. You can change the language of the web-based interface
in any menu item.
10
Autres manuels pour DIR-620
7
Table des matières
Autres manuels D-Link Routeur sans fil
D-Link
D-Link DIR-1260 Manuel utilisateur
D-Link
D-Link R15 Manuel
D-Link
D-Link DIR-600 Manuel utilisateur
D-Link
D-Link DIR 635 B3 Manuel utilisateur
D-Link
D-Link DI-724U - Wireless 108G QoS Office Router Manuel utilisateur
D-Link
D-Link DWR-113 Manuel utilisateur
D-Link
D-Link DIR-815 Manuel utilisateur
D-Link
D-Link DIR-615 - Wireless N Router Manuel utilisateur
D-Link
D-Link DVG-G1402S - Wireless Broadband VoIP Router Manuel utilisateur
D-Link
D-Link DSL-2740B Manuel utilisateur
D-Link
D-Link EXO AX DIR-X1870 Manuel utilisateur
D-Link
D-Link DSL-2750E Manuel utilisateur
D-Link
D-Link DSL-2680 Manuel utilisateur
D-Link
D-Link DIR-816L Manuel utilisateur
D-Link
D-Link GO-RT-AC750 Manuel utilisateur
D-Link
D-Link 2Voice + 4SW VoIP Router DVG-1402S Manuel utilisateur
D-Link
D-Link DSL-G604T Manuel utilisateur
D-Link
D-Link COVR-1900 Manuel utilisateur
D-Link
D-Link DIR-600 Manuel utilisateur
D-Link
D-Link DWR-720 Manuel utilisateur
