D-Link DBA-1510P Manuel utilisateur

This document will guide you through the basic installation

process for your D-Link Wireless AC Access Point.

DBA-1510P

Documentation is also available on the D-Link website

Quick Installation Guide

Business Cloud Access Point

ENGLISH

About This Instruction Guide

This installation guide provides instructions

for installing the DBA-1510P Business Cloud

Access Point on your network. For additional

information about how to use the DBA-1510P,

please see the User’s Manual which is available

from the D-Link support website.

Setup Preparation

Please ensure that the following items are

readily available before continuing the quick

installation process.

D-Link Business Cloud License

DBA-1510P Registration in D-Link Business

Cloud

DBA-1510P is able to connect to D-Link

Business Cloud through internet.

System Requirements

If you are unable to connect to the D-Link

Business Cloud through the Internet due to

your networking conguration you will need to

manually congure the DBA-1510P. Below are

the minimum system requirements needed to

manually congure the device.

An Ethernet port, or an installed Ethernet

adapter

Internet Explorer 9.0, Safari 5.0, Firefox 19,

Chrome 25 or later versions of these browsers

Package Contents

DBA-1510P Business Cloud Access Point

Mounting Ring

Power Adapter

Ethernet Cable

Console Cable

Rubber Feet

If any of the above items are missing, please

contact your reseller.

Note: Using a power supply with a different

voltage than the one included with the DBA-

1510P will damage the device and void the

warranty for this product.

Hardware Overview

LEDs

Power Solid Orange The DBA-1510P is

performing its startup

procedure

Solid Green The DBA-1510P is ready

to use

LAN Solid Green The DBA-1510P is

connected to another

device on the network

Blinking Green The DBA-1510P is

transferring data

Cloud Solid Orange The DBA-1510P is

connecting to the D-Link

Business Cloud

Solid Green The DBA-1510P is

currently in Cloud mode

Solid Red The DBA-1510P is not

working properly in Cloud

mode

2.4 Ghz Solid Green The DBA-1510P is

operating in 2.4 Ghz

mode

Blinking Green The DBA-1510P is

transferring data over

2.4 Ghz

5 Ghz Solid Green The DBA-1510P is

operating in 5 Ghz mode

Blinking Green The DBA-1510P is

transferring data over

5 Ghz

Interfaces

ENGLISH

Bottom

Power Receptor

LAN Port (PoE)

Serial Console Port

Front

Kensington Security Slot

Reset Button

Press the Reset Button between 2 to 5

seconds to restart the device.

Press the Reset Button between 6 to 15

seconds to restore the device to its factory

default settings.

Press the Reset Button more than 15 seconds

to restore the device to its factory default

settings and also force the loading of alternate

rmware.

Installation

Step 1 – Powering The Device

To power on the DBA-1510P, you can use one

of the two following methods:

1. Connect the supplied power adapter

2. Plug one end of your Ethernet cable into

the LAN port of the DBA-1510P, and the

other end into a port on a Power over

Ethernet enabled switch.

Step 2 – Congure The Device

The easiest way to congure the DBA-1510P

is to connect the DBA-1510P to the Internet

through a switch or router. Connect your

computer to the Internet and manage the

DBA-1510P via D-Link Business Cloud.

The DBA-1510P will automatically connect

to the D-Link Business Cloud, download its

conguration, and join the appropriate network.

If you are unable to connect the DBA-1510P to

the D-Link Business Cloud through the Internet

due to your networking conguration you will

need to manually congure the DBA-1510P

using one of the following options.

1. Connect the DBA-1510P and your

computer directly via a straight-through

Ethernet cable. You can then manage the

access point from your computer using the

following steps.

Enter the DBA-1510P hostname in the

address eld of your browser and then

press Enter. The default hostname is

“DBA-1510P-XXXX” where XXXX is the

last 4 digits of the MAC address listed on

the device label located on the bottom of

the device.

default login information is:

Username: admin

Password: admin

2. Connect the DBA-1510P and your

computer to the same switch or router. You

can then manage the access point from

your computer using the following steps.

Enter the DBA-1510P hostname in the

address eld of your browser and then

press Enter. The default hostname is

D-Link DBA-1510P Quick Install Guide

ENGLISH

Switch or RouterSwitch or Router

Switch or Router

Management

DBA-1510P

Management

D-Link Business Cloud

D-Link DBA-1510P Quick Install Guide

ENGLISH

Switch or RouterSwitch or Router

Switch or Router

Management

DBA-1510P

Management

D-Link Business Cloud

ENGLISH

“DBA-1510P-XXXX” where XXXX is the

last 4 digits of the MAC address listed on

the device label located on the bottom of

the device.

The default login information is:

Username: admin

Password: admin

3. Connect your computer to the

DBA-1510P wirelessly via the SSID

“DBA-1510P-XXXX” where XXXX is the

last 4 digits of the MAC address listed on

the device label located on the bottom

of the device. You can then manage the

access point from your computer using the

following steps.

Enter the DBA-1510P hostname in the

address eld of your browser and then

press Enter. The default hostname is

“DBA-1510P-XXXX” where XXXX is the

last 4 digits of the MAC address listed on

the device label located on the bottom of

the device.

The default login information is:

Username: admin

Password: admin

Note: Once the device has been manually

congured, it must be able to connect to the

D-Link Business Cloud in order to continue

functioning properly.

Step 3 – Mounting The Device

To mount the DBA-1510P, use one of the

following methods:

Mounting on a Solid Wall

Place the plastic wall mounting ring on a wall

or ceiling.

1. Mark the points where you will insert the

screws. Remove the mounting ring.

2. Drill holes in the marked points and insert

the plastic wall anchors.

3. Use the supplied screws to attach the

mounting ring to the wall.

4. Plug the Ethernet cable into the LAN port

on the access point.

D-Link DBA-1510P Quick Install Guide

ENGLISH

Switch or RouterSwitch or Router

Switch or Router

Management

DBA-1510P

Management

D-Link Business Cloud

D-Link DBA-1510P Quick Install Guide

ENGLISH

Switch or RouterSwitch or Router

Switch or Router

Management

DBA-1510P

Management

D-Link Business Cloud

ENGLISH

5. If you are not using a PoE switch or router

with the DBA-1510P, plug the power

cable into the Power Receptor on the

access point.

6. Place the DBA-1510P onto the mounting

ring brackets. Lock the DBA-1510P

into place by rotating the DBA-1510P

clockwise.

Placement on a Desktop

1. Attach the provided rubber feet to the

holes located on the back of the DBA-

1510P housing.

2. Plug the Ethernet cable into the LAN port

on the access point.

3. If you are not using a PoE switch or router

with the DBA-1510P, plug the power

cable into the Power Receptor on the

access point.

Additional Information

If you are encountering problems setting up

your network, please refer to the user manual

that can be obtained from the D-Link website. It

contains many more rules, charts, explanations,

and examples to help you get your network up

and running.

Additional help is available through our ofces

listed at the back of the user manual or online.

To nd out more about D-Link products or

marketing information, please visit the website

http://www.dlink.com.

Warranty Information

The Warranty information is available at http://

warranty.dlink.com/

Federal Communication Commission Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Non-modification Statement:

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

FCC Radiation Exposure Statement:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment should be installed and operated with minimum distance 20cm between the radiator &

your body.

Autres manuels pour DBA-1510P

Table des matières

Autres manuels D-Link Point d'accès sans fil

D-Link

D-Link xtreme n duo dap-1522 Manuel utilisateur

D-Link

D-Link DAP-2230 Manuel utilisateur

D-Link

D-Link Air Premier DAP-2695 Manuel utilisateur

D-Link

D-Link DWR-730 Manuel utilisateur

D-Link

D-Link Rangebooster N 650 Access Point DAP-1353 Manuel utilisateur

D-Link

D-Link D DWL-8200AP DWL-8200AP Manuel utilisateur

D-Link

D-Link DAP-1155 Manuel utilisateur

D-Link

D-Link DWL-2700AP - AirPremier Outdoor Wireless Access... Manuel utilisateur

D-Link

D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access... Manuel utilisateur

D-Link

D-Link DWL-3600AP Manuel de service

D-Link

D-Link D DWL-8200AP DWL-8200AP Manuel utilisateur

D-Link

D-Link AirPremier DWL-7700AP Manuel utilisateur

D-Link

D-Link DAP-3520 - AirPremier N Dual Band Exterior PoE Access... Manuel utilisateur

D-Link

D-Link AirPremier DWL-7700AP Manuel utilisateur

D-Link

D-Link AirPremier DAP-2565 Manuel utilisateur

D-Link

D-Link DAP-3315 Manuel utilisateur

D-Link

D-Link DWL-8200AP - AirPremier Managed Dualband Access... Manuel utilisateur

D-Link

D-Link DWL-6600AP Manuel utilisateur

D-Link

D-Link DWL-3610AP Manuel utilisateur

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

D-Link

D-Link DI-713 Manuel utilisateur

D-Link

D-Link AirPlus Xtreme G DWL-2000AP Manuel utilisateur

D-Link

D-Link AirPremier N DAP-2690 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur