D-Link DAP-1665 Manuel utilisateur
Quick Install Guide
Wireless AC1200
Dual Band Access Point
DAP-1665
2DAP-1665 Install Guide
Network Requirements:
• An Ethernet-based Network (AP mode)
• IEEE 802.11ac, n, or g wireless clients (AP/Repeater Mode)
• IEEE 802.11ac, n, or g wireless network (Client Mode)
Browser Requirements:
• Internet Explorer®7.0, Chrome, Firefox, or Safari 4.0 or higher
Minimum Requirements
Package Contents
Note: Usinga powersupplywith adierentvoltagethantheone includedwiththe DAP-1665willcausedamage
and void the warranty for this product. If any of the above items are missing, please contact your reseller.
DAP-1665 Wireless AC1200 Dual Band Access Point
Two Detachable Antennas
Ethernet Cable
Quick Install Guide
Power Adapter
Wi-Fi Conguration Card
DAP-1665 Install Guide 3
Hardware Overview
Connections
4
321
3
1 Reset
Use an unfolded paper clip to press and hold the reset
button for 10 seconds. This will reset the DAP-1665 back
to the factory default settings.
2 LAN Port
Connect an Ethernet-based device such as a computer,
video game console, Network Attached Storage (NAS)
device, or media player.
3 Power Button Press the power button to power on and o.
4 Power Receptor Receptor for the supplied power adapter.
4DAP-1665 Install Guide
Hardware Overview
LEDs
4321
1 Power LED A solid light indicates a proper connection to the power
supply.
22.4GHz Wireless LED
A solid green light indicates the wireless function is
working.The light will be o during device reboot or if the
wireless radio is disabled.
35GHz Wireless LED
A solid green light indicates the wireless function is
working.The light will be o during device reboot or if the
wireless radio is disabled.
4 LAN LED A solid light indicates a connection to an Ethernet-
enabled device.
DAP-1665 Install Guide 5
What Mode Should I Use?
Access Point Mode
RESET
LAN
5V
1A
Use Access Point Mode (default mode) if you want to connect wireless
clients (such as laptops, tablets, smartphones, and media players) to
your wired network. When in Access Point Mode, the device can either
act as the wireless transmitter for your wired router or become a
separate access point to expand your network.
Setup instructions for Access Point Mode begin on page 8.
6DAP-1665 Install Guide
RESET
LAN
5V
1A
Use Repeater Mode to extend the wireless signal of your wireless router,
increasing your wireless network coverage. The DAP-1665 will connect
wirelessly to your wireless router or access point and will broadcast its
signal to your wireless clients.
Note: For best performance, place your DAP-1665 in between your router
and your dead zone, making sure it’s placed in a location where the signal is
still strong.
Setup instructions for Repeater Mode begin on page 11.
Repeater Mode
DAP-1665 Install Guide 7
Wireless Client Mode
Use Wireless Client Mode to connect one Ethernet-based device, such
as a computer, video game console, Network Attached Storage (NAS)
device, or media player to your existing wireless network.
Note: Wireless clients cannot connect to the DAP-1665 wirelessly when in
this mode.
Setup instructions for Wireless Client Mode begin on page 13.
RESET
LAN
5V
1A
or
or
8DAP-1665 Install Guide
Installation
Plug the supplied power adapter into your DAP-1665 and connect it to the outlet or surge
protector. Press the Power button on the back of the device. Verify that the Power LED is lit.
RESET
LAN
5V
1A
1
3
Attach one end of the included Ethernet cable to the LAN port on the back of the DAP-1665, and
the other end into the Ethernet port on your wireless router.
RESET
LAN
5V
1A
12V
2A
USB
WPS
1
2
3
LAN
4
INTERNET
POWER
LAN
2
Access Point Mode
From the computer connected to your wireless router, open a web browser (e.g., Internet Explorer,
Firefox, Safari, or Chrome) and enter http://dlinkap.local./. Windows XP users can enter http://
dlinkap. Use the Setup Wizard to congure your AP.
DAP-1665 Install Guide 9
At the login screen, select Admin from the User Name drop-down menu and
leave the password blank. Click Log In to continue.
4
6
5Click LaunchWireless SetupWizard and you will be guided through the steps
required to get your access point up and running.
You will see the welcome screen for the Wi-Fi Connection Setup Wizard. Click
Next to continue.
10 DAP-1665 Install Guide
7
8
9
Select Access Point from the Wireless Mode drop-down menu. Click Next to
continue.
Enter a 2.4Ghz and 5GHz Wi-Fi Network Name and Wi-Fi Password. Click
Next to continue.
When setup is complete,make a note of your settings and click Save. The
DAP-1665 will reboot.
Your setup is complete!
Autres manuels pour DAP-1665
7
Table des matières
Autres manuels D-Link Point d'accès sans fil
D-Link
D-Link AirPlus DWL-900AP+ Manuel utilisateur
D-Link
D-Link DWL-3500AP Manuel utilisateur
D-Link
D-Link DAP-2660 Manuel utilisateur
D-Link
D-Link DWL_7100 Manuel utilisateur
D-Link
D-Link DIR-505 Manuel utilisateur
D-Link
D-Link Rangebooster N 650 Access Point DAP-1353 Manuel utilisateur
D-Link
D-Link NUCLIAS CONNECT DAP-2680 Manuel utilisateur
D-Link
D-Link nuclias connect DAP-2662 Manuel utilisateur
D-Link
D-Link DAP-1360U Manuel utilisateur
D-Link
D-Link AirPremier N DAP-3690 Manuel utilisateur
D-Link
D-Link Air Premier DAP-2695 Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2360 Manuel utilisateur
D-Link
D-Link DHP-W306AV Manuel utilisateur
D-Link
D-Link DAP-3310 Manuel utilisateur
D-Link
D-Link DAP-1513 Manuel utilisateur
D-Link
D-Link DWL-3500AP Manuel de service
D-Link
D-Link AirPremier N DAP-2690 Manuel utilisateur
D-Link
D-Link DWL-6620APS Manuel utilisateur
D-Link
D-Link DBA-2820P Manuel utilisateur
D-Link
D-Link DAP-1150 Manuel utilisateur
