D-Link AirPremier N DAP-2690 Manuel utilisateur

Quick Install Guide+

Installations-Anleitung+

Guide d’installation+

Guía de instalación+

Guida di Installazione+

Wireless N

DUAL BAND PoE ACCESS POINT

DAP-2690

D-Link DAP-2690 Quick Install Guide 1

ENGLISH

Minimum System Requirements:

• CD-ROM Drive

• Computers with Windows®, Macintosh®, or Linux-based operating

systems

• Installed Ethernet Adapter

• Internet Explorer 7.0, Mozilla Firefox®version 12.0, Safari 4.0, or

Chrome 20.0 or newer

System Requirements

Package Contents

Note: If any of the above items are missing, please contact your reseller.

NOTE no PSU supplied. To power the units use an D-Link PoE switch or the D-Link DPE-101GI PoE

injector.

DAP-2690 802.11n

Power over Ethernet

Access Point

Ethernet Cable CD-ROM

Console Cable Mounting Plate

D-Link DAP-2690 Quick Install Guide

ENGLISH

Hardware Overview

LEDs

5 GHz - When lit, the access point is operating at 5GHz.

This light will blink when there is wireless trafc.

2.4 GHz - When lit, the access point is operating at

2.4GHz. This light will blink when there is wireless trafc.

LAN - Solid light when the Ethernet port is connected to a

working port, such as a router or switch. The light will blink

when there is trafc through LAN port.

POWER - The light will blink during boot up. Once solid,

the access point is ready.

D-Link DAP-2690 Quick Install Guide 3

ENGLISH

Installing the Hardware

5GHz Antenna Connectors*

* 2.4GHz antenna connectors are located on the bottom of the access point.

* PoE kit (injector and adapter) is NOT include in the package and it can be purchased

with the model name “DPE-101GI”.

LAN Port (PoE)

Reset Button

Console Port Power Receptor

(*Note no longer

used, replaced

by PoE)

D-Link DAP-2690 Quick Install Guide

ENGLISH

To power the access point, you can use othe following steps :

1. Connect one end of your Ethernet cable into the LAN (PoE) port

on the DAP-2690.

2. Connect the other end into one port on a PoE switch.

3. Purchase separately a DPE-101GI PoE injector if you need to

connect the Access Point without a PoE Switch.

D-Link DAP-2690 Quick Install Guide 5

ENGLISH

Step 1: Insert the provided wall anchors in the wall where the mounting

plate will be attached.

Mounting Plate Assembly

Step 2: Use the provided screws to secure the mounting plate on the wall.

D-Link DAP-2690 Quick Install Guide

ENGLISH

Step 3: Attach the remaining screws securely to the back of the DAP-2690.

Step 4: Attach the DAP-2690 to the mounting plate.

D-Link DAP-2690 Quick Install Guide 7

ENGLISH

Step 5: Slide the DAP-2690 down into the grooves on the mounting plate

to secure it to the plate.

D-Link DAP-2690 Quick Install Guide

ENGLISH

When you have completed the steps in this Installation Guide and congured

your for your network, your network should look similar to this:

Your Setup is Complete

* Maximum Wireless signal rate derived from IEEE 802.11n specications. Actual data throughput will vary.

Network conditions and environmental factors, including volume of network trafc, building materials and

construction, and network overhead lower actual data throughput rate.

To setup and manage the DAP-2690 from a computer, use one of the following

methods:

1. Connect a straight through Ethernet cable between the access point and

your computer.

2. Connect the access point to a switch or router and use a computer from a

computer that is also connected to that switch or router.

TECHNICAL SUPPORT dlink.com/support

Autres manuels pour AirPremier N DAP-2690

Table des matières

Langues :

Autres manuels D-Link Point d'accès sans fil

D-Link

D-Link DAP-2610 Manuel utilisateur

D-Link

D-Link DWL-3500AP Manuel utilisateur

D-Link

D-Link DWL-6610AP Manuel utilisateur

D-Link

D-Link DWL-6600AP Manuel utilisateur

D-Link

D-Link DAP-2330 v 1.0 Manuel utilisateur

D-Link

D-Link AirPremier DWL-2210AP Manuel utilisateur

D-Link

D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Manuel utilisateur

D-Link

D-Link DWL-1000AP Manuel utilisateur

D-Link

D-Link AirPlus DWL-900AP+ Manuel utilisateur

D-Link

D-Link DAP-1260L Manuel utilisateur

D-Link

D-Link DAP-2660 Manuel utilisateur

D-Link

D-Link DAP-2682 Manuel utilisateur

D-Link

D-Link Nuclias Connect DAP-2622 Manuel utilisateur

D-Link

D-Link DAP-2230 Manuel utilisateur

D-Link

D-Link DAP-1160 Manuel utilisateur

D-Link

D-Link DPN-101G Manuel utilisateur

D-Link

D-Link DWL-3200AP - AirPremier - Wireless Access... Manuel utilisateur

D-Link

D-Link DIR-505 Manuel utilisateur

D-Link

D-Link AirPremier N DAP-2360 Manuel utilisateur

D-Link

D-Link AirPro DWL-6000AP Manuel utilisateur

D-Link

D-Link AirPremier N DAP-2690 Manuel utilisateur

D-Link

D-Link DWL-7100AP Manuel utilisateur

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

D-Link

D-Link AirPremier N DAP-2690 Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur

Draytek

Draytek VIGORAP 902 Manuel utilisateur

EnGenius

EnGenius EAP350 Manuel utilisateur