D-Link DAP-2660 Manuel utilisateur
Documentation also available on
the D-Link Website
This document will guide you through the basic installation
process for your new D-Link Wireless AC Access Point.
DAP-2660
Quick Installation Guide
Nuclias Connect AC1200 Dual Band PoE Access Point
D-Link DAP-2660 Quick Install Guide 1
ENGLISH
DAP-2660 Quick Install Guide
This installation guide provides basic instructions for installing the DAP-2660 Wireless Access
Point on your network. For additional information about how to use the Access Point, please
see the User’s Manual which is available on the CD included in this package or from the
D-Link support website.
System Requirements
Minimum System Requirements:
• CD-ROM Drive
• an Ethernet port, or an installed Ethernet adapter
• Internet Explorer 7.0, Safari 5.0, Firefox 3.5, Chrome 20 or later versions of these
browsers
1. Package Contents
DAP-2660 802.11ac Power over Ethernet (PoE) Access Point
Mounting Brackets
Quick Start Guide
If any of the above items are missing, please contact your reseller.
NOTE no PSU supplied. To power the units use an D-Link PoE switch or the D-Link
DPE-101GI PoE injector.
D-Link DAP-2660 Quick Install Guide
2
ENGLISH
2. Hardware Overview
LED
Power/Status LED - Dual color (Red/green)
. Flash Red during booting up or malfunction
. Static Green while it’s ready/working
. Solid Red while boot up fail
. Flash Green while traffic is passing through.
Interfaces
Power Receptor
(*Note no longer used,
replaced by PoE)
LAN Port (PoE)
* PoE kit (injector and adapter) is NOT include in the package and it can be purchased
with the model name "DPE-101GI".
D-Link DAP-2660 Quick Install Guide 3
ENGLISH
2. Connect the access point and your computer to the same switch. Manage the
access point from the computer.
Enter http://dap2660.local/ in the address field of your browser, which is the default
IP address of the access point.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
Power on the access point
To power on the DAP-2660, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into the LAN port of the DAP-2660, and the
other end into a port on a PoE switch.
2. Purchase separately a DPE-101GI PoE injector if you need to connect the Access
Point without a PoE Switch.
Congure the access point
To set up and manage the DAP-2660, use one of the following methods:
1. Connect the access point and your computer via DPE-101GI. Manage the access
point from the computer.
Ensure your computer is congured with a static IP address in http://dap2660.local/
subnet.
Launch a web browser, type the default IP address of the access point ( http://
dap2660.local/ ) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
3. Installation
OR
Computer
PoE Switch
DAP-2660
Computer
PoE Injector
Power
Adapter
D-Link DAP-2660 Quick Install Guide
4
ENGLISH
Solid wall or ceiling
Installation
1. Place the mounting bracket on a wall or
ceiling.
5. Plug the Ethernet cable into the LAN
port on the access point.
6. To attach the access point to the
mounting bracket.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
3. Drill holes in the marked points and
insert the plastic wall anchors.
4. Use the supplied screws to attach the
mounting ring to the wall.
D-Link DAP-2660 Quick Install Guide 5
ENGLISH
1. Clip two ceiling brackets onto the ceiling
panels. Make sure both brackets are in
line with each other.
2. Use the provided screws to attach the
mounting ring to the ceiling bracket.
3. Plug the Ethernet cable into the LAN
port on the access point.
4. Place the DAP-2660’s male bracket
in the mounting bracket’s female
bracket. Click DAP-2660 and the
mounting bracket to lock in position.
Ceiling bracket
Ceiling crossbar
Mounting with a ceiling bracket
Installation
TECHNICAL SUPPORT dlink.com/support
GPL Code Statement
This D-Link product includes software code developed by third parties,
including software code subject to the GNU General Public License (“GPL”)
or GNU Lesser General Public License (“LGPL”). As applicable, the terms of
the GPL and LGPL, and information on obtaining access to the GPL code
and LGPL code used in this product, are available to view the full GPL Code
Statement at:
https://tsd.dlink.com.tw/GPL
The GPL code and LGPL code used in this product is distributed WITHOUT
ANY WARRANTY and is subject to the copyrights of one or more authors. For
details, see the GPL code and the LGPL code for this product and the terms of
the GPL and LGPL.
Written Oer for GPL and LGPL Source Code
Where such specific license terms entitle you to the source code of such
software, D-Link will provide upon written request via email and/or
traditional paper mail the applicable GPL and LGPLsource code files via
CD-ROM for a nominal cost to cover shipping and media charges as allowed
under the GPL and LGPL.
Please direct all inquiries to:
Email:
Snail Mail:
Attn: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
Written Oer for GPL and LGPL Source Code
Déclaration relative au code GPL
Ce produit D-Link comprend des codes de logiciel développés par
des tiers, y compris des codes de logiciel soumis à la Licence Publique
Générale GNU ( «GPL») ou à la Licence Publique Générale GNU Limitée
(«LGPL»). Le cas échéant,, les conditions de la GPL et de la LGPL, ainsi
que les informations permettant d’accéder au code GPL et au code LGPL
utilisés dans ce produit, sont disponibles pour consulter la déclaration de
code GPL complète au:
http://tsd.dlink.com.tw/GPL
Les codes GPL et LGPL utilisés dans le produit sont distribués SANS
AUCUNE GARANTIE et sont soumis aux droits d'auteur d'un ou de
plusieurs auteurs. Pour plus de détails, reportez-vous aux codes GPL et
LGPL de ce produit et aux conditions de la GPL et de la LGPL.
Ore écrite pour le code source GPL et LGPL
Si des conditions spécifiques de la licence vous donnent droit au code
source du logiciel, D-Link fournira, sur demande écrite par courrier
électronique et/ou courrier papier traditionnel, les fichiers de code
source GPL et LGPL applicables via CD-ROM à un coût nominal pour
couvrir les frais d'expédition et de support comme autorisé par la licence
GPL et LGPL.
Veuillez adresser toutes les demandes à:
Courrier électronique:
Courrier ordinaire:
Attention: GPLSOURCE REQUEST
D-Link Systems, Inc.
17595 Mt. Herrmann Street
Fountain Valley, CA 92708
Ver. 1.01(WW)_130x183
2019/10/30
Autres manuels pour DAP-2660
7
Table des matières
Autres manuels D-Link Point d'accès sans fil
D-Link
D-Link DWL-6620APS Manuel utilisateur
D-Link
D-Link DAP-3220 Manuel utilisateur
D-Link
D-Link DAP-1160 Manuel utilisateur
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
D-Link
D-Link DWL-G700AP - AirPlus G Access Point Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2310 Manuel utilisateur
D-Link
D-Link DAP-3662 Manuel utilisateur
D-Link
D-Link DWL-3600AP Manuel utilisateur
D-Link
D-Link AirXpert DWL-7000AP Manuel utilisateur
D-Link
D-Link DWL-2200AP - AirPremier - Wireless Access... Manuel utilisateur
D-Link
D-Link DWL-8720AP Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2310 Manuel utilisateur
D-Link
D-Link DVA-G3670B Manuel utilisateur
D-Link
D-Link DWS-3024L Manuel utilisateur
D-Link
D-Link DWL-6600AP Manuel d'installation
D-Link
D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur
D-Link
D-Link DAP-1360 Manuel utilisateur
D-Link
D-Link DAP-2553 - Wireless N Dual Band Gigabit Access... Manuel utilisateur
D-Link
D-Link xtreme n duo dap-1522 Manuel utilisateur
D-Link
D-Link DWL-AG700AP - AirPlus AG - Wireless Access... Manuel utilisateur
