D-Link AirPremier DWL-1700AP Manuel utilisateur
Manual
Building Networks for People
Outdoor 2.4 GHz
D-Link AirPremier
DWL-1700AP
Wireless Access Point
This product should be installed ONLY by
experienced, professional installers who are
familiar with local building and safety codes,
and wherever applicable, are licensed by the
appropriate authorities. Failure to do so may
void the warranty and may expose the user or the
service provider to legal and financial liabilities.
2
Contents
Package Contents ................................................................................ 3
Introduction ........................................................................................... 4
Connections ......................................................................................... 5
Outdoor Installation .............................................................................. 6
Grounding ............................................................................................. 6
Features ............................................................................................... 7
Network Layout .................................................................................... 8
Using the Configuration Utility ............................................................ 10
Networking Basics .............................................................................. 30
Frequently Asked Questions .............................................................. 45
Troubleshooting .................................................................................. 47
Appendix I: Telnet Configuration (optional) ......................................... 52
Appendix 2: Boot Code Firmware Upgrade ........................................ 61
Appendix 3: Wireless Basics .............................................................. 71
Technical Specifications ..................................................................... 73
Contacting Technical Support ............................................................. 76
Warranty and Registration .................................................................. 77
3
Contents of Package:
D-Link AirPremier DWL-1700AP
Outdoor 2.4GHz Wireless Access Point
Inline Power Injector
AC Power Cord
MIL-C-5015 style RS232 Console Port Cable
Grounding Wire
Crossover Ethernet Cable
30M MIL-C-5015 style Ethernet Cable
Two rubber dipole antennas
Mast Mounting Kit
Wall Mounting Kit
Manual on CD
Package Contents
If any of the above items are missing, please contact your reseller.
1
2
3
4
5
10
6
78
9
1
2
3
4
5
6
7
8
9
10
11
11
4
Introduction
The DWL-1700AP conforms to the 802.11 standard and covers a large operating
distance, providing an 11Mbps* outdoor WLAN which enables users to access
the Internet or an organization’s network.
The D-Link AirPremier DWL-1700AP features a die-cast watertight housing and
a built-in lightning protector to protect the access point from harsh environmental
conditions, including extreme variance in temperature. It also includes Power
over Ethernet (POE) and a unique outdoor remote-mounted design for easy
installation.
The DWL-1700AP is suitable for manufacturing plants, industrial sites, military
bases, universities, hotels, airports and golf courses.
Configurable as either a Wireless Access Point or a Wireless Router, the
DWL-1700AP offers 128-bit encryption; 802.1x authentication when used
with a RADIUS server; MAC address access control; and additional security
features.
With a built-in firewall, the DWL-1700AP can operate as a NAT inbound virtual
server and provides IP based access control. Denial of Service (DoS) protection
is also included with the DWL-1700AP to prevent the wireless network from
being hacked. The DWL-1700AP is easily managed via a web-based user
interface, Telnet, or RS-232 console configuration. The DWL-1700AP can also
be managed remotely through SNMP (MIB I & MIB II) support.
Internet Explorer Version 6.0 or Netscape Navigator
Version 6.0 and Above
Computers with Windows, Macintosh, or Linux-based
operating systems with an installed Ethernet adapter
System Requirements for Configuration:
*”Maximum wireless signal rate based on IEEE Standard 802.11b specifications. Actual data throughput
rate will vary. Network conditions and environmental factors, including volume of network traffic, building
materials and construction, and network overhead lower actual data throughput rate.”
5
Connections
Special Ethernet Port
Connect one end of the
MIL-C-5015 Ethernet
Cable into this port;
connect the other end
into the Power and Data
Output Port on Inline
Power Injector.
Special serial port (optional)
Connect one end of the MIL-C-5015 style RS-232
console port cable to this port; connect the other
end to a Serial Port on a computer that is running
a terminal emulation program. Set the terminal
to 115,200 Baud, No Parity, 8 data bits, 1 stopbit
and ANSI compatible.
Note: This connection is optional. Use this
console connection only if you are configuring
the DWL-1700AP via the console. (Or when you
fail to configure the unit through the Web-based
utility).
Antennas
Attach the
antennas, with
the unit powered
OFF. Do not
over-tighten.
Position antennas
vertically for best
reception.
Power Port
Attach one end of
the power cord to the
power port; attach
the other end to the
wall outlet.
Data Input Port
Connect one end
of the cross-over
Ethernet cable to
this port; connect
the other end to the
Ethernet port on the
computer.
Power & Data
Output Port
Attach one end of
the special Ethernet
cable to this port;
attach the other
end to the Special
Ethernet Port on the
DWL-1700AP.
6
Outdoor Installation
The DWL-1700AP can be mounted on the side of a building or mounted to a
mast as shown above. A wall mount is a convenient location if the roof overhang
is not excessive and/or the location is high enough to provide a clear line of
sight.
Grounding
A safety grounding system is necessary to protect your outdoor
installation from lightning strikes and the build-up of static electricity.
Direct grounding of the antenna mast and the DWL-1700AP is very
important. The grounding system must comply with the National
Electrical Code and the safety standards that apply in your country.
Always check with a qualified electrician if you do not know how to
properly ground the DWL-1700AP.
This product should be installed ONLY by experienced, professional installers who
are familiar with local building and safety codes, and wherever applicable, are
licensed by the appropriate authorities. Failure to do so may void the warranty and
may expose the user or the service provider to legal and financial liabilities.
D-Link and its resellers or distributors are not liable for injury, damage or violation
of regulations associated with the installation of outdoor units or antennas.
7
Features
Better security
Compatible with the 802.11b standard to provide a wireless transfer rate
of up to 11Mbps.*
Ideal for Internet Hotspots- Provides outdoor users with wireless Internet
Access
2 Different Operation modes - Capable of operatingas either a Router or
an Access Point.
Robust Outdoor Housing - Designed for harsh outdoor environments, with
die-cast, watertight housing and built-in lightning protector
802.1x - In conjunction with a RADIUS server, 802.1x Authentication
verifies the identity of would be clients
Built-in Firewall
Operates in the 2.4GHz frequency range
Easy Installation with the Setup Wizard
Multiple Management options - Great for enterprise wireless network
management
Web-based configuration
Telnet
RS-232 Console configuration
SNMP (MIB I & MIB II) support
8
Mount the DWL-1700AP to an unobstructed wall or mast. Make sure that is is
grounded.
Network Layout
Connect the DWL-1700AP to the Inline Power Injector
Connect a Hub, Switch or Router to the Inline Power Injector
Connect a desktop computer to the router. You can use this Ethernet connected
computer to configure and manage the DWL-1700AP
9
Upon completion of the installation, laptops, with wireless network cards installed,
will be able to connect wirelessly to the DWL-1700AP in order to surf the Internet.
Network Layout (continued)
For more information regarding installation, please see the sections on
Grounding and Connections in this manual, and the Quick Installation Guide
that came with your purchase.
10
Using the Configuration Utility
To configure the DWL-1700AP, use a computer which is connected to the
DWL-1700AP with an Ethernet cable (see the Network Layout diagram).
First, disable the Access the Internet using a proxy server function.
To disable this function, go to Control Panel > Internet Options >
Connections > LAN Settings and uncheck the enable box.
Start your web browser program (Internet Explorer, Netscape Navigator)
.
Type the IP Address and HTTP port of the DWL-1700AP (the default
port is 2000; the IP is 192.168.0.50) in the address field (http://192.16
8.0.50:2000/) and press Enter. Make sure that the IP Addresses of the
DWL-1700AP and your computer are in the same subnet.
Autres manuels pour AirPremier DWL-1700AP
1
Table des matières
Autres manuels D-Link Point d'accès sans fil
D-Link
D-Link DWL-8710AP Manuel utilisateur
D-Link
D-Link DWL-3600AP Manuel utilisateur
D-Link
D-Link nuclias connect DAP-2662 Manuel utilisateur
D-Link
D-Link AirPro DWL-6000AP Manuel utilisateur
D-Link
D-Link AirPremier DAP-2565 Manuel utilisateur
D-Link
D-Link DWL-8220AP - AirPremier Wireless Switch Dualband Access... Manuel utilisateur
D-Link
D-Link DWL-6700AP Manuel utilisateur
D-Link
D-Link DAP-3712 Manuel utilisateur
D-Link
D-Link DWS-4000 Series Manuel d'installation
D-Link
D-Link NUCLIAS CONNECT DAP-2680 Manuel utilisateur
D-Link
D-Link DAP-2660 Manuel utilisateur
D-Link
D-Link DBA-1510P Manuel utilisateur
D-Link
D-Link AirPremier N DAP- 2590 Manuel utilisateur
D-Link
D-Link DAP-1160 Manuel utilisateur
D-Link
D-Link AirPlus DWL-900AP Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2690 Manuel utilisateur
D-Link
D-Link DAP-1620 Manuel
D-Link
D-Link AirPremier N DAP-2690 Manuel utilisateur
D-Link
D-Link DAP-1360 Manuel utilisateur
D-Link
D-Link AirPremier N DAP-2310 Manuel utilisateur
