D-Link DKVM-2K Manuel utilisateur

2-Port KVM Switch

with Built-in Cables

DKVM-2K

This product works with

all Windows Operating

Systems

Check Your Package Contents

These are the items included with your purchase:

Before You Begin

You must have at least the following:

• PS/2 Keyboard

• PS/2 Mouse

• VGA or Higher Monitor

• DKVM-2K KVM Switch with Built-In Cables

• PS/2 / USB converter

respective holders. Software and speciﬁ cations subject to change without notice.

If any of the above items are missing, please contact your reseller.

Installing the DKVM-2K

Attach your computer’s 6-pin PS/2

male keyboard connector to the

DKVM-2K keyboard port.

Attach your monitor’s HDDB 15 VGA

connector to the console port of the

DKVM-2K.

Attach your computer’s 6-pin PS/2

male mouse connector to the

DKVM-2K mouse port.

Make sure that all your computers are turned OFF before installing

the DKVM-2K to avoid mouse and keyboard errors when booting up

your computers.

Installing the DKVM-2K

Attach the DKVM-2K‘s built-in

monitor cable to the VGA port

located on the back of your

computer case.

Attach the DKVM-2K’s built-in

mouse cable to the PS/2 mouse

port located on the back of your

computer case.

Attach the DKVM-2K’s built-in

keyboard cable to the PS/2

keyboard port located on the

back of your computer case.

Type A

Power ON all your attached computers after you have

completed the DKVM-2K installation.

The following steps below apply to both the computers that you are using with your

DKVM-2K.

Switching with the DKVM-2K

The DKVM-2K features a Select Button located on the front panel and keyboard Hot

Keys to switch quickly and easily between both your computers.

Select

Button

To enter Hot Key switching mode, press the Scroll Lock key twice. A beep conﬁ rms that

the Hot Key mode is activated.

Hot Key Menu

Scroll Lock + Scroll Lock + 1 : Switches to PC 1

Scroll Lock + Scroll Lock + 2 : Switches to PC 2

Scroll Lock + Scroll Lock + S : Activates Auto Scan Mode. Each

computer will be scanned every 10

seconds.

Scroll Lock + Scroll Lock + ESC : Exits Auto Scan Mode and Hot

Key Mode.

Scroll Lock + Scroll Lock + M: Resets the Mouse and Keyboard

Troubleshooting Tips

Keyboard

If your keyboard is not functional, not detected, or there is a keyboard error on boot-

up, check the following:

• Make sure that the keyboard is properly connected to the

computer and to the DKVM-2K. Check that the keyboard is plugged into the

correct PS/2 keyboard port and not the PS/2 mouse port.

• Verify that the keyboard works when plugged into the computer directly. You

will have to shut down your computer ﬁrst to do this.

• Read your motherboard documentation and make sure that the PS/2

keyboard’s IRQ is enabled. This can be set for most computers in the

BIOS setup.

• Try using a different keyboard.

Mouse

If your mouse is not functional, not detected, or there is a mouse error on boot-up,

check the following:

• Make sure that the mouse is properly connected to the

computer and to the DKVM-2K. Check that mouse is plugged into the

correct PS/2 mouse port and not the PS/2 keyboard port.

• Verify that the mouse works when plugged into the computer directly. You

will have to shut down your computer ﬁrst to do this.

• Read your motherboard documentation and make sure that the PS/2

mouse’s IRQ is enabled. This can be set for most computers in the

BIOS setup.

• Try using a different mouse.

• If mouse movement is random when switching between computers, try

shutting down your computer and rebooting.

• Verify that your computers do not have more than one mouse driver installed

(check your conﬁg.sys and autoexec.bat ﬁles for Windows) and that you are

using the latest mouse driver.

• If a special mouse is used such as a cordless or scrolling mouse, make sure

you use generic PS/2 mouse drivers. A non-standard PS/2 mouse may have

extensions on the PS/2 protocol that are not supported by the DKVM-2K.

• Do not move the mouse or press any mouse buttons when switching from one

PC to another.

• Try resetting the mouse by unplugging it from the DKVM-2K for about 3

seconds and reconnecting.

Video

If the image on your monitor is not clear, check the following:

• Verify that all video monitor cables are inserted properly.

• Try lowering the resolution and refresh rate of your monitor.

• Try using a shorter video cable.

Technical Support

You can ﬁnd software updates and user documentation on the D-Link website.

D-Link provides free technical support for customers within the United States and

within Canada for the duration of the warranty period on this product.

U.S. and Canadian customers can contact D-Link technical support through our

website, or by phone.

Tech Support for customers within the United States:

D-Link Technical Support over the Telephone:

(877) 453-5465

24 hours a day, seven days a week

D-Link Technical Support over the Internet:

http://support.dlink.com

email:[email protected]

Tech Support for customers within Canada:

D-Link Technical Support over the Telephone:

(800) 361-5265

Monday to Friday 7:30am to 12:00am EST

D-Link Technical Support over the Internet:

http://support.dlink.ca

email:[email protected]

Tech Support for customers within

the United Kingdom & Ireland:

D-Link UK & Ireland Technical Support over the Telephone:

+44 (0)845 612 0003 (United Kingdom)

+353 (0)12 421 061 (Ireland)

Monday to Friday 8:00 am to 10:00 pm

D-Link Technical Support over the Internet:

http://www.dlink.co.uk

DKVM-2K

KVM-Switch mit zwei

Anschlüssen und

integrierten Kabeln

Dieses Produkt

funktioniert mit allen

Windows-Versionen

Lieferumfang überprüfen

Die folgenden Artikel gehören zum Lieferumfang des Geräts:

Vor dem Start

Systemanforderungen:

• PS/2-Tastatur

• PS/2-Maus

• VGA-Monitor oder besser

•DKVM-2K KVM-Switch mit integrierten Kabeln

•PS/2 / USB Konverter

jeweiligen Inhaber. Änderungen vorbehalten.

Sollte eines dieser Teile fehlen oder beschädigt sein, wenden Sie sich

bitte an Ihren Fachhändler.

DKVM-2K installieren

Verbinden Sie den 6-poligen

Stecker der PS/2-Tastatur mit dem

Tastaturanschluss des DKVM-2K.

Verbinden Sie den HDDB 15 VGA-

Anschluss des Monitors mit dem

Konsolenanschluss des DKVM-2K.

Verbinden Sie den 6-poligen

Stecker der PS/2-Maus mit dem

Mausanschluss des DKVM-2K.

Alle Computer müssen ausgeschaltet sein, bevor Sie den DKVM-

2K installieren, um Funktionsstörungen der Tastatur oder der

Maus beim Hochfahren des Computers zu vermeiden.

Type A

Schließen Sie das eingebaute

Monitorkabel des DKVM-

2K an den VGA-Anschluss

auf der Rückseite des

Computergehäuses an.

Schließen Sie das eingebaute

Mauskabel des DKVM-2K

an den PS/2-Mausanschluss

auf der Rückseite des

Computergehäuses an.

Schließen Sie das eingebaute

Tastaturkabel des DKVM-2K

an den PS/2-Tastaturanschluss

auf der Rückseite des

Computergehäuses an.

Wenn Sie die Installation des DKVM-2K abgeschlossen

haben, schalten Sie die angeschlossenen Computer ein.

Die folgenden Schritte sind an beiden Computer durchzuführen, die mit dem

DKVM-2K verbunden sind.

DKVM-2K installieren

Umschalten mit dem DKVM-2K

Der DKVM-2K besitzt auf der Vorderseite eine Select-Taste und Hot Keys auf der

Tastatur, um schnell und einfach zwischen beiden Computern zu wechseln.

Select-

Taste

Sie können auch die Tastatur verwenden, um zwischen Computern zu wechseln.

Drücken Sie die Scroll Lock-Taste zweimal, um den Hot Key-Switching-Modus

aufzurufen. Die Aktivierung des Hot Key-Switching-Modus wird durch einen Signalton

bestätigt.

Hot Key-Menü

Scroll Lock + Scroll Lock + 1 : Umschalten zu PC 1

Scroll Lock + Scroll Lock +2 : Umschalten zu PC 2

Scroll Lock + Scroll Lock + S : aktiviert den Auto-Scan-Modus.

Zwischen den Computern wird im Abstand von 10 Sekunden

umgeschaltet.

Scroll Lock + Scroll Lock + ESC : beendet den Auto-Scan-Mo-

dus und den Hot Key-Modus.

Scroll Lock + Scroll Lock + M: Setzt die Maus und Tastatur Einstel-

lungen zurueck

Autres manuels pour DKVM-2K

Table des matières

Langues :

Autres manuels D-Link Changer

D-Link

D-Link DGS-1024C Manuel utilisateur

D-Link

D-Link DGS-1008P Manuel utilisateur

D-Link

D-Link xStack DGS-3426 Manuel utilisateur

D-Link

D-Link xStack DGS-3600 Series Manuel utilisateur

D-Link

D-Link mydlink DCH-G022 Manuel utilisateur

D-Link

D-Link DGS-3100 SERIES Manuel utilisateur

D-Link

D-Link DES-7200 Manuel

D-Link

D-Link DSH-16+ Manuel utilisateur

D-Link

D-Link DKVM-4K - KVM Switch Manuel utilisateur

D-Link

D-Link DUB-2240 - Wireless USB Hub Manuel utilisateur

D-Link

D-Link xStack DGS-3400 Series Manuel utilisateur

D-Link

D-Link DGS-3000-52L Manuel utilisateur

D-Link

D-Link DKVM-8E Manuel utilisateur

D-Link

D-Link DGS-1010MP Manuel utilisateur

D-Link

D-Link Web Smart DES-1210-52 Manuel utilisateur

D-Link

D-Link DFE-908x Manuel utilisateur

D-Link

D-Link DES-108 Manuel utilisateur

D-Link

D-Link DAS-3324 Manuel utilisateur

D-Link

D-Link DES-3528 - xStack Switch - Stackable Manuel

D-Link

D-Link xStack DGS-3600 Series Manuel utilisateur

D-Link

D-Link xStack Manuel utilisateur

D-Link

D-Link DES-1009MP Manuel utilisateur

D-Link

D-Link DXS-3600-16S Manuel utilisateur

D-Link

D-Link DES-3010FA Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur