D-Link DES-1226R Manuel utilisateur

ENGLISH

DES-1218

R/1226R

Fast Ethernet Switch

With 2 Gigabit Port

Installation Guide

First Edition (July, 2001)

6ES1200RML01

Printed In Taiwan

RECYCLABLE

Introduction

This Quick Installation Guide gives illustrations

for configuring DES-12xx series Fast Ethernet

Switches. The model you have purchased may

appear slightly different from those shown in the

illustrations. Examples in this manual are based

on DES-1218R/DES-1226R switches. However,

the information provided also applies to new

model in the future. For more detailed informa-

tion about the switch, its components, making

network connections and technical specifica-

tions, please refer to the User’s Guide included

with your switch.

Unpacking

Please make sure the following items are present

and undamaged.

Rack Installation

Attaching the mounting brackets on the switch’s

front panel (one on each side) and secures them

with the screws provided.

Then, use the screws provided with the equip-

ment rack to mount the Switch in the rack.

ENGLISH

Plugging in the AC Power Cord

Please connect the AC power cord into an electri-

cal outlet (preferably one that is grounded and

surge protected) and into the rear of the switch.

Once the switch is powered on, you will be able to

immediately see whether the network connection

are valid or not. A valid connection will cause the

Link/Rx LED on the front panel of the switch to

light up for the corresponding port being con-

nected.

Connecting End Stations

Computers, servers and routers can be connected

to the switch by using normal straight-through

twisted-pair network cables. 10Mbps Ethernet

connections should use Category 3 or better UTP

cabling, while 100Mbps Fast Ethernet connec-

tions should use Category 5 or better UTP or STP

cabling. On the other hand, Gigabit Ethernet

connections will use fiber optic cables. For more

information about cable types, please refer to the

User’s Guide.

Ethernet uses a star topology, so please be atten-

tion that cables should never be connected to

form a loop. Data sent from one computer should

have one, and only one path to the destination

computer.

Uplinking

The switch can be Uplinked to other network de-

vices (hubs, hub stacks, bridges, switches, etc.).

When making uplink connections, make sure

there is only a single connection, and always

connect an Uplink port on one switch to a non-

Uplink port on the other device, as shown in the

diagram below.

The following diagram shows one type of network

connections that can be made to the switch. For

more connection implementations please refer to

the User’s Guide or consult your vendor.

Additional Information

If you are encountering problems setting up

your network, please refer to the User’s Guide

that came with the switch. It contains many

more rules, charts, explanations and examples

to help you get your network up and running.

Additional help is available online at

http://www.dlink.com for the United States and

http://www.dlink.co.uk for Great Britain. URLs

for D-Link Websites in other countries are con-

tained in the list at the back of the User’s Guide.

Autres manuels pour DES-1226R

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels D-Link Changer

D-Link

D-Link DSS-100E-18P Manuel utilisateur

D-Link

D-Link DKVM-4U Manuel utilisateur

D-Link

D-Link GO-SW-16G Manuel utilisateur

D-Link

D-Link DKVM-2K Manuel utilisateur

D-Link

D-Link DGS-1005D - Switch Manuel utilisateur

D-Link

D-Link DGS-3024 Manuel utilisateur

D-Link

D-Link xStack DGS-3427 Manuel utilisateur

D-Link

D-Link xStack DGS-3120-24TC Manuel utilisateur

D-Link

D-Link DGS-1210-10P Manuel utilisateur

D-Link

D-Link DUB-H4 Manuel utilisateur

D-Link

D-Link EasySmart DGS-1100-16/E Manuel utilisateur

D-Link

D-Link KVM-222 Manuel utilisateur

D-Link

D-Link DGS-1210-20/FL Manuel utilisateur

D-Link

D-Link DIS-100G-10S Manuel utilisateur

D-Link

D-Link xStack DGS-3600 Series Manuel utilisateur

D-Link

D-Link DGS-3700 Series Manuel utilisateur

D-Link

D-Link xStack DGS-3620-52P Manuel utilisateur

D-Link

D-Link Web Smart DES-1210-28P Manuel utilisateur

D-Link

D-Link DES-3624i Manuel utilisateur

D-Link

D-Link DSS-16+ Manuel utilisateur

D-Link

D-Link KVM-440 Manuel utilisateur

D-Link

D-Link DXS-1210-28S Manuel utilisateur

D-Link

D-Link DGS-3000-28LP Manuel utilisateur

D-Link

D-Link DSB-650TX Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Manuel utilisateur