D-Link DCS-942L Manuel utilisateur

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 1of 8

How to connect the DCS-942L wirelessly

This document will detail how to change the DCS-942L configuration to be connecting

wirelessly to your Wireless Access oint, without having to run through the Setup Utility

again.

Ensuring the firmware remains up to date can assist with functionality / improved

performances as well as adding additional features.

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 2of 8

It is assumed that you have followed the setup guide "How to install the DCS-942L" and during the

installation you sele ted the "Wired" onfiguration. It's therefore assumed that your DCS-942L is onne ted

using an Ethernet able. Continue reading to hange this onfiguration to be onne ting wirelessly instead.

1. You will need to know the IP Address of your DCS-942L. There are two ways in whi h this an be done.

Setup Utility:

Run through the Setup Utility sele ting the default options until you get to a heading "First, sele t your

amera":

We now have the IP Address whi h is assigned to the DCS-942L. Please remember the urrent IP Address

assigned as we will require it shortly. Your assigned IP Address may also be different to my example. You

may lose the Setup Utility now.

Checking your Router's Web Configuration:

Do umentation and or Manufa turer as DHCP Client List may be alled another name:

The below illustration is from a D-Link DIR-825 and its DHCP Client List is referred as the 'Dynami DHCP

Clients':

We now have the IP Address whi h is assigned to the DCS-942L. Please remember the urrent IP Address

assigned as we will require it shortly. Your assigned IP Address may also be different to my example.

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 3of 8

2. Now we know the assigned IP Address, please type your IP Address into your Internet Browser, then press

Enter or Go:

3. You will need to login with your username and password that you assigned to your DCS-942L during the

Setup Utility pro ess:

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 4of 8

4. When you have su essfully a essed the DCS-942L Web Configuration you will see a similar illustration

on your Internet Browser as the below illustration:

NOTE: Your Live Video results may differ.

5. Cli k on the Setup menu, followed by li king on the Wireless Setup heading, then li k the Enable

Wireless button:

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 5of 8

6. Patiently wait for the ountdown, do not dis onne t any Ethernet ables:

7. Now we onfigure the DCS-942L Wireless Configuration with the details of our Wireless A ess Point:

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 6of 8

8. Cli k on the Site Survey drop down arrow and sele t the Wireless name or SSID that you want to onne t

to:

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 7of 8

9. Now type in your wireless password into the Key field, then li k on the Save Settings button:

10. Patiently wait for the ountdown, do not dis onne t any Ethernet ables:

D-Link Technical Support – How to connect the DCS-942L wirelessly. Page 8of 8

11. Che k the rear panel of the DCS-942L and ensure that the power LED is green, provided it is green you

may now dis onne t the Ethernet able from the rear panel of your DCS-942L.

NOTE: When you disconnect the Ethernet ca le the power LED will turn red, then come green again within

a few seconds.

12. You will know that your onne ted wirelessly as you should also be able to li k on the other menu's in

the DCS-942L Web Configuration and when viewing the Live Video menu, moving obje ts should also be

visible in the DCS-942L Web Configuration.

~ End of Do ument ~

Autres manuels pour DCS-942L

Table des matières

Autres manuels D-Link Caméra de sécurité

D-Link

D-Link DCS-8325LH Manuel utilisateur

D-Link

D-Link DCS-2630L Instructions d'utilisation

D-Link

D-Link DCS-8000LHV2 Manuel utilisateur

D-Link

D-Link DCS-3710 Manuel utilisateur

D-Link

D-Link DCS-3110 - SECURICAM Fixed Network Camera Manuel utilisateur

D-Link

D-Link SECURICAM DCS-7110 Manuel utilisateur

D-Link

D-Link DCS 6210 Manuel utilisateur

D-Link

D-Link DCS-932L Manuel utilisateur

D-Link

D-Link DCS-2210 Manuel utilisateur

D-Link

D-Link DCS-3511 Manuel utilisateur

D-Link

D-Link DCS-932L Manuel utilisateur

D-Link

D-Link Air DCS-1000W Manuel utilisateur

D-Link

D-Link DCS-6517 Manuel utilisateur

D-Link

D-Link DCS-933L Cloud Camera 1150 Manuel utilisateur

D-Link

D-Link DCS-3110 - SECURICAM Fixed Network Camera Manuel utilisateur

D-Link

D-Link DCS-2130 Manuel utilisateur

D-Link

D-Link DCS-934L Manuel utilisateur

D-Link

D-Link DCS-8100LH Manuel utilisateur

D-Link

D-Link DCS-6112 Manuel utilisateur

D-Link

D-Link MyDlink DCS-8515LH Manuel utilisateur

D-Link

D-Link DCS-2310L Manuel utilisateur

D-Link

D-Link DCS-5230 Manuel utilisateur

D-Link

D-Link DCS-2310L Manuel utilisateur

D-Link

D-Link DCS-2530L Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur