D-Link DSL-524B Manuel utilisateur

Quick Installation Guide

DSL-524B Generation II

ADSL2+ Router

Before You Begin

Check Your Package Contents

Make sure you have all the necessary information and equipment on hand

before beginning the installation.

DSL-524B ADSL Modem

CD-ROM (containing Manual)

Ethernet (CAT5 UTP) Cable

Telephone Cable

Power Adapter

If any of the above items are missing, please contact your reseller

Connecting the Modem to Your Computer

A. First, connect the power adapter to the receptor at the back panel of the

DSL-524B and then plug the other end of the power adapter to a wall outlet or

power strip. The Power LED will turn ON to indicate proper operation.

B. Insert one end of the cable into the Ethernet port on the back panel of the

DSL-524B and the other end of the cable to an Ethernet Adapter or available

Ethernet port on your computer.

ADSL Port

Use the ADSL cable to connect to the

your telephone line (RJ-11 port)

Ethernet Port

Use the Ethernet port to connect

the Router to a computer or an

Ethernet LAN

Power Insert

Use the adapter shipped with

the Router to connect to power

source

Power Button

Push in to power-on the Router.

Push again to power-off the Router

Reset Button

To manually reset, depress button with

the power on for at least seven seconds

Conguring the Modem

To use your Web browser to access the web pages used to setup the Modem, your computer must be

congured to “Obtain an IP address automatically”, that is, you must change the IP network settings of your

computer so that it is a DHCP Client. If you are using Windows XP and do not know how to change your

network settings, skip ahead to Appendix A and read the instructions provided. You may also read the User

Manual for instructions on changing IP settings for computers running Windows operating systems.

Open your Web browser and type

“http://192.168.1.1” into the URL address box.

Then press the Enter or Return key.

The Login page appears.

Type “admin” for the

in the Password eld. Click OK

Power Insert

Conguring the Modem (continued)

Click “WAN” on the left page, enter into “WAN Area Network (WAN) Setup” conguration page.

Click on the next connection which you want modify. Press “Add” button, enter the congure guide,

as following picture showed.

The value for VPI/VCI is assigned by your ISP. After inputting the PVC value, press “Next” to “Connection

Type”, as following picture showed.

Select “PPP over Ethernet (PPPoE)”, press “Next” entering the conguring interface, as following

picture showed.

Congure your PPP Username and Password from ISP. Then press “Next” to “Network Address

Translation Settings”, as following picture showed.

Press “Next” to enter into “WAN Setup - Summary”, click “Save” to save conguration, if you need

to modify the parameter, click “Back”, as following picture showed.

Conguring the Modem (continued)

To save the new settings, please access Management menu , click the Save/reboot button in the Save/

reboot menu. After a few seconds, the changes will be saved. The Modem will automatically establish the

Internet connection after a few more seconds.

Wait a few seconds for the Internet connection to be established and proceed to access the Internet via your web browser.

Click Save/reboot button to

save the new settings.

For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-

management interface; or to the manual located on the CD-ROM.

Use the following steps to congure a computer running Windows XP to be a DHCP client.

1. From the Start menu on your desktop, go to Settings, then click on Network Connections.

2. In the Network Connections window, right-click on LAN (Local Area Connection), then click Properties.

Conguring IP Settings in Windows XP

Appendix

3. In the General tab of the Local Area Connection Properties menu, highlight Internet Protocol (TCP/IP)

under “This connection uses the following items:” by clicking on it once. Click on the Properties button.

Right-click on the Local Area Connection

icon and Select the Properties option

from the pull-down menu.

Click Properties

Autres manuels pour DSL-524B

Table des matières

Autres manuels D-Link Routeur réseau

D-Link

D-Link DSL-510 Manuel utilisateur

D-Link

D-Link DIR-820 Manuel utilisateur

D-Link

D-Link DSL-2500U Manuel utilisateur

D-Link

D-Link DFL-260 - NetDefend - Security Appliance Manuel utilisateur

D-Link

D-Link Express EtherNetwork DI-604 Manuel utilisateur

D-Link

D-Link EAGLE PRO AI M15 Manuel utilisateur

D-Link

D-Link GO-RT-N150 Manuel utilisateur

D-Link

D-Link DES-6000 Series Manuel utilisateur

D-Link

D-Link DSL-3590L Manuel utilisateur

D-Link

D-Link AirPlus DWL-810+ Manuel utilisateur

D-Link

D-Link RANGEBOOSTER N 650 Manuel utilisateur

D-Link

D-Link Amplifi DHP-1565 Manuel utilisateur

D-Link

D-Link DIR-845L Instructions d'utilisation et de sécurité

D-Link

D-Link DFL-210 - NetDefend - Security Appliance Manuel utilisateur

D-Link

D-Link DIR-879 Manuel utilisateur

D-Link

D-Link DSL-2544N Manuel utilisateur

D-Link

D-Link DSS-24+ Manuel utilisateur

D-Link

D-Link DIR-615+ Manuel utilisateur

D-Link

D-Link DSL-4320L Manuel utilisateur

D-Link

D-Link COVRAX COVR-X1860 Manuel utilisateur

D-Link

D-Link DIR-850L Manuel utilisateur

D-Link

D-Link DSL-2770L Manuel utilisateur

D-Link

D-Link DKT-810 Manuel utilisateur

D-Link

D-Link DIR-514 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité