D-Link AirPlus DWL-G730AP Manuel utilisateur

D-Link AirPlus G Wireless Pocket Router/AP

Quick Installation Guide+

Руководство по быстрой установке+

Guía de Instalación Rápida+

Guia de Instalação Rápida+

快速安裝指南+

Petunjuk Pemasangan Cepat+

DWL-G730AP

This product can be set up using any

current web browser, i.e., Internet

Explorer 6 or Netscape Navigator 6.2.3.

5V 1.2A DC Power Adapter

Before You Begin

Check Your Package Contents

DWL-G730AP Wireless Pocket Router/AP

CD-ROM with Manual

Ethernet (CAT5 UTP) Cable

If any of the above items are missing, please contact your reseller.

Using a power supply

with a different voltage

ratingwilldamageandvoid

the warranty of this product.

Software and specications subject to change without notice. DWL-G730AP.08162004

D-Link Travel Case

The default IP address for the DWL-G730AP is 192.168.0.30 with a Subnet Mask of

255.255.255.0. You will need to assign your computer a Static IP address within the same

range as the DWL-G730AP’s IP address for the purpose of conguring the DWL-G730AP.

USB Power Cable

DWL-G730AP

D-Link AirPlus™G

Wireless Pocket

Router/AP

Hardware Overview

Mode Selection Switch:

Used to select AP, client,

or router mode.

LAN Port

This is the connection for Ethernet cables to

your Ethernet-enabled device. When in Router

mode, this port functions as a WAN port.

Receptor for

Power Adapter

Power LED: Solid

indicates a connection to

a good power source.

Top Panel

Bottom Panel

Rear Panel

LAN LED: Solid indicates an

Ethernet connection. Blinking

indicates activity on the

Ethernet network.

WLAN LED: A solid light

indicates that the wireless

segment is ready. This LED

blinks during wireless data

transmission.

Reset Button:

Used to restore

default settings.

Installation Overview

The DWL-G730AP offers three different operation modes:

AP (Access Point Mode): In this mode, the DWL-G730AP functions as an access point.

Client (Client Mode): When Client mode is selected, the DWL-G730AP as a wireless

client.

RT (Router Mode): The DWL-G730AP functions as a router when this mode is selected.

AP - Access Point Mode

When the Mode Selection Switch on the bottom of the DWL-G730AP is set to AP,

the unit is in Access Point Mode. The diagram below illustrates a typical access

point conguration.

Note: D-Link® AirPlus G wireless devices are pre-congured to connect together,

right out of the box, using their default settings.

Installation Overview (continued)

Client - Client Mode

When the Mode Selection Switch on the bottom of the DWL-G730AP is set to

Client, the unit is in Client Mode. The diagram below illustrates a typical client

conguration.

Note: D-Link® AirPlus G wireless devices are pre-congured to connect together,

right out of the box, using their default settings.

Installation Overview (continued)

RT - Router Mode

When the Mode Selection Switch on the bottom of the DWL-G730AP is set to

RT, the unit is in Router Mode. The diagram below illustrates a typical router

conguration.

Note: D-Link® AirPlus G wireless devices are pre-congured to connect together,

right out of the box, using their default settings.

AP Mode - Using the Setup Wizard

Once you have logged in, the

Home screen will appear.

Click Run Wizard

The logon pop-up screen

will appear.

Type admin for the

username and leave the

password eld blank.

Click OK

To congure the DWL-G730AP in AP Mode, you will need to connect a PC directly to

the DWL-G730AP using a standard Ethernet cable. You will need to assign the network

adapter connecting to the DWL-G730AP an IP address in the range of 192.168.0.x.

O p e n y o u r W e b

browser and type

http://192.168.0.30

into the URL address

box. Then press the

Enter or Return key.

Click Next

Set up your new password.

You have the option to

establish a password.

Set Your Wireless LAN

Connection.

By default the DWL-G730AP

SSID is set to ‘default’ with a

Channel setting of ‘6’.

Click Next

AP Mode - Using The Setup Wizard

(continued)

You will see the following screens.

Click Next

Encryption

The DWL-G730AP is capable of

two levels of wireless encryption

64-bit and 128-bit. By default

encryption is disabled. You

can change the encryption

settings for more secure wireless

communication.

Click Next

Click Restart

AP Mode - Using The Setup Wizard

(continued)

Click Close

The AP Setup Wizard is complete! You will be returned to the Home tab. Please close

all web browser windows.

Client Mode - Using the Setup Wizard

Once you have logged in, the

Home screen will appear.

Click Run Wizard

Open your Web

browser and type

http://192.168.0.30

into the URL address

box. Then press the

Enter or Return key.

The logon pop-up screen

will appear.

Type admin for the

username and leave the

password eld blank.

Click OK

To congure the DWL-G730AP in Client Mode, you will need to connect a PC directly to

the DWL-G730AP using a standard Ethernet cable. You will need to assign the network

adapter connecting to the DWL-G730AP an IP address in the range of 192.168.0.x.

Autres manuels pour AirPlus DWL-G730AP

Table des matières

Langues :

Autres manuels D-Link Routeur réseau

D-Link

D-Link DSL-2751 Manuel utilisateur

D-Link

D-Link DIR-882 Manuel utilisateur

D-Link

D-Link DES-3326 Manuel utilisateur

D-Link

D-Link DSL-2888A Manuel utilisateur

D-Link

D-Link GLB-802C Manuel utilisateur

D-Link

D-Link DGS-1016D - Switch Manuel utilisateur

D-Link

D-Link DES-810 Manuel utilisateur

D-Link

D-Link 2Voice + 4SW VoIP Router DVG-1402S Manuel utilisateur

D-Link

D-Link DIR-300 - Wireless G Router Manuel utilisateur

D-Link

D-Link M60 Manuel utilisateur

D-Link

D-Link DFL-1500 Manuel utilisateur

D-Link

D-Link xtreme n duo dap-1522 Manuel utilisateur

D-Link

D-Link DSL-G225 Manuel utilisateur

D-Link

D-Link DIR-456 Manuel utilisateur

D-Link

D-Link DWR-712 Manuel utilisateur

D-Link

D-Link AirPremier DWL-1800 Manuel utilisateur

D-Link

D-Link DIR-600L Manuel utilisateur

D-Link

D-Link DES-1004 Manuel utilisateur

D-Link

D-Link DSL-504T Manuel utilisateur

D-Link

D-Link DSL-2540U Manuel utilisateur

D-Link

D-Link GO-RT-AC750 Manuel utilisateur

D-Link

D-Link DIR-879 Manuel utilisateur

D-Link

D-Link DES-1526 Manuel utilisateur

D-Link

D-Link DES-1026G Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité