D-Link SharePort DIR-825 Manuel utilisateur

Additional documentation is also available on the D-Link website

DIR-825

Quick Installation Guide

AC1200 Wi-Fi Gigabit Router & LTE Outdoor CPE

DWP-812KT

Contents

English 1

Polski 7

Quick Installation Guide 1

ENGLISH

Before You Begin

This Quick Installation Guide gives you step-by-

step instructions for setting up your DIR-825

AC1200 Wi-Fi Gigabit Router and connecting

it to your DWP-812KT LTE Outdoor CPE. The

model you have purchased may appear slightly

diﬀerent from the one shown in the illustrations.

For more detailed information about the router,

please refer to the User Manual.

Package Contents

This package should include the following items:

• DIR-825 AC1200 Wi-Fi Gigabit Router

• DWP-812KT LTE Outdoor CPE

• Power adapter (DIR-825)

• Power adapter (DWP-812KT)

• PoE injector (DWP-812KT)

• 10 meter Ethernet cable

• 2 x 1 meter Ethernet cable

• Mounting bracket

• 4 x M6 screw

• 4 x M3 screw

• 2 x U-bolt clamp

• Quick Installation Guide

If any of the above items are damaged or

missing, please contact your local D-Link reseller.

Installing and mounting the DWP-812KT and

connecting it to the DIR-825 requires the use

of a drill with a 4 mm drill bit and a Phillips

screwdriver.

Note: Using a power supply with a diﬀerent

voltage than the one recommended for the

devices will cause damage and void the

warranty for these products.

System Requirements

• Safari 8, Google Chrome 48, Microsoft

Internet Explorer 10, Microsoft Edge

20.10240, Mozilla Firefox 44, or Opera 35

• A PC with an Ethernet or Wi-Fi adapter

Hardware Overview

DIR-825 Front Panel LED Indicators

13 4

Figure 1: DIR-825 Front Panel LED Indicators

# LED Description

1Power Indicates whether the DIR-825 is

receiving power.

2 Internet

Oﬀ No Ethernet cable attached.

Slow

Blinking

Cable attached, but no

Internet connection.

Solid

Green

Active connection; no data

is being transferred.

Fast

Blinking

Active connection; data is

currently being transferred.

3 LAN Indicates whether the router is

connected to devices on its LAN ports.

42.4G/5G

WLAN

Indicates whether the 2.4 GHz and 5

GHz interfaces are enabled or disabled.

5 WPS Indicates whether WPS is enabled.

6 USB Indicates whether a USB storage

device is connected to the DIR-825.

Table 1: DIR-825 Front Panel LED

Indicator Descriptions

2 5 6

2Quick Installation Guide

ENGLISH

DWP-812KT Rear Panel

LED Indicators

PWR

ETH

SIM

Figure 3: Front Panel Interface

# LED Description

1 RF

Indicates the strength of the LTE

signal. More bars signify a stronger

signal.

2PWR Indicates whether the device is

receiving power.

3 ETH

Indicates whether the DWP-812KT

is connected to another device on

its Ethernet port.

4 SIM

Indicates whether an active SIM

card is inserted into the SIM card

slot.

Table 3: DWP-812KT Rear Panel LED Indicators

DWP-812KT Interface Connectors

Figure 4: DWP-812KT Interface Connectors

# Connector Description

1SIM Card

Slot

2FF SIM card slot.

2Ethernet

LAN Port

10/100/1000 Gigabit Ethernet

LAN port.

Table 4: DWP-812KT Interface Connectors

DIR-825 Rear Panel

Interface Connectors

LAN4 LAN3 LAN2 LAN1

WAN USB

WPS

WiFi

POWER

- • +

Figure 2: DIR-825 Rear Panel Interface Connectors

# Interface Description

1 WIFI Press to enable or disable Wi-Fi.

2 WPS

Press to start the WPS process and

create an encrypted connection to

a WPS client.

3Ethernet

LAN Ports

10/100/1000 Gigabit Ethernet

LAN ports.

4Ethernet

WAN Port

10/100/1000 Gigabit Ethernet

WAN port.

5USB 2.0

Port

USB 2.0 port for a storage device.

6Power

Input

Input for the power adapter.

7Power

Button

Press to power the DIR-825 on

or oﬀ.

Table 2: DIR-825 Rear Panel Interface

Connector Descriptions

2 3 4 5 6 7

1 2

Quick Installation Guide 3

ENGLISH

Hardware Installation

Before You Begin

Observe the following precautions to help

prevent shutdowns, equipment failures, and

personal injury:

• Install the DIR-825 in a cool and dry place.

• Install the DIR-825 in a site free from strong

electromagnetic sources, vibration, dust,

excessive moisture, and direct sunlight.

• Place in an unobstructed area with a clear

mobile signal. Avoid metal boxes, brick

walls, and other dense materials.

• Visually inspect the power connector and

make sure that it is fully secure.

• Do not stack any devices on top of the

DIR-825.

Setting Up the DWP-812KT

The DIR-825 is designed to connect to a 4G

LTE network through the DWP-812KT. Check

that you have an active LTE SIM card from your

service provider.

1. Unscrew the covers from the SIM card slot

and Ethernet LAN port on the bottom

panel of the DWP-812KT.

2. Insert an active LTE SIM card into the SIM

card slot.

SIM

PoE

Figure 5: Inserting a SIM Card and Ethernet Cable

3. Connect an Ethernet cable to the LAN port

on the bottom panel of the DWP-812KT,

threading it through the hole on the

Ethernet cover. Connect the other end to

the PoE port on the included PoE injector.

4. Replace both covers on the bottom panel

of the DWP-812KT.

Figure 6: Attaching the Covers

Establishing an Internet Connection

with the DIR-825

Connecting to the DWP-812KT

1. Ensure that the DWP-812KT is powered on

and set up with an active SIM card. (Refer

to Setting Up the DWP-812KT below.)

2. Use an Ethernet cable to connect the WAN

port on the rear panel of the DIR-825 to the

data port on the PoE injector.

3. Connect the power adapter to the power

input on the DIR-825 and plug the adapter

into a nearby power outlet.

4Quick Installation Guide

ENGLISH

Connecting to the

Management Computer

Connecting via Ethernet

1. Use an Ethernet cable to connect the

LAN port on the rear panel of the DIR-825

to an Ethernet port on the management

computer.

2. Turn on the router by pressing the POWER

button on its back panel.

3. Make sure that the Ethernet adapter of

your PC is configured to obtain an IP

address automatically.

Connecting via Wi-Fi

1. Turn on the DIR-825 by pressing the

POWER button on its back panel.

2. Make sure that the Wi-Fi adapter of your

PC is conﬁgured to obtain an IP address

automatically.

3. Connect to the network DIR-825-XXXX

(for operating in the 2.4 GHz band) or

DIR-825-5G-XXXX (for operating in the 5 GHz

band), substituting the last four characters

of the DIR-825's MAC address for XXXX. Use

the WPS PIN from the barcode label as the

network key.

Mounting the DWP-812KT

Place the DWP-812KT outside, in an open area.

Obstructions such as windows or concrete

or wooden walls affect the transmission and

reception of wireless signals. Keep the DWP-812KT

away from appliances that produce strong electric

or magnetic ﬁelds such as dish satellite antennas.

Mounting on a Pole

1. Attach the U-shaped bracket to the pole

using the provided mounting ties.

Figure 7: Attaching the Bracket to the Pole

2. Attach the other mounting bracket to the

rear panel of the DWP-812KT using four

mounting screws.

PWR

ETH

SIM

PWR

ETH

SIM

Figure 8: Attaching the Rear

Panel Mounting Bracket

3. Place the mounting bracket over the

U-shaped bracket. Position the DWP-812KT

at the desired angle and attach it with four

screws.

Figure 9: Attaching the Bracket to the Pole

Quick Installation Guide 5

ENGLISH

Mounting on a Wall

1. Place the U-shaped bracket against the

wall in the desired position. Use a 4 mm

drill bit to make four holes approximately

30 mm deep, then insert four wall anchors

into the holes.

2. Use four screws to attach the U-shaped

bracket to the wall.

3. Use four screws to attach the mounting

bracket to the rear panel of the

DWP-812KT, or eight screws to stack two

mounting brackets together, allowing

the DWP-812KT's angle to be adjusted

horizontally and vertically.

Figure 10: Attaching Two Mounting Brackets

4. Place the mounting brackets over the

U-shaped bracket. Position the DWP-812KT

at the desired angle and attach it with four

screws.

Completed Installation

Once the installation is complete and the DIR-825 is

connected to the DWP-812KT, your network should

resemble Figure 11: Completed Installation.

Figure 11: Completed Installation

Management Options

1. First, ensure that the DIR-825 and

DWP-812KT are both connected. Launch

a web browser. Enter 192.168.0.1 in the

address ﬁeld of your browser.

2. When you first access the web-based

interface, you will be prompted to enter a

new admin password for the UI. Type the

password in the ﬁrst ﬁeld and retype it in

the second ﬁeld to conﬁrm it.

3. After changing the admin password, use

the menu in the left part of the page to

conﬁgure the router.

It is recommended that you immediately disable

the DWP-812KT's PIN Code Request feature to

prevent problems when the device is powered

oﬀ. For detailed instructions on how to do this,

refer to the User Manual.

Wired LAN

Clients

Wireless LAN

Clients

DIR-825

DWP-812KT

PoE Injector

LTE

6Quick Installation Guide

ENGLISH

Additional Information

If you are encountering problems setting up

your network, please refer to the user manual.

Additional help is available online. To ﬁnd out

more about D-Link products or marketing

information, please visit the D-Link support

website at http://dlink.com/support/.

Warranty Information

The D-Link Limited LifetimeWarranty information

is available at the following website:

http://warranty.dlink.com/

TECHNICAL SUPPORT eu.dlink.com/support

Quick Installation Guide 7

POLSKI

Wstęp

Skrócona instrukcja instalacji wyjaśnia jak,

krok po kroku zainstalować zestaw IDU/ODU.

Zakupione urządzenia mogą się nieznacznie

różnić od widocznych na ilustracjach. Aby

uzyskać szczegółowe informacje dotyczące

routera, pobierz Instrukcję obsługi ze strony

dlink.com

Zawartość opakowania

Wewnątrz opakowania znajdują się następujące

elementy:

• Router DIR-825 AC1200 Wi-Fi Gigabit

• Antena zewnętrzna DWP-812KT LTE

Outdoor CPE

• Zasilacz (DIR-825)

• Zasilacz (DWP-812KT/Adapter PoE)

• Adapter PoE (PoE injector) (DWP-812KT)

• 1x Kabel Ethernet 10m

• 2x Kabel Ethernet 1m

• Uchwyt montażowy

• 4x śruby M6

• 4x śruby M3

• 2x zaciski w kształcie litery U

• Skrócona instrukcja instalacji

Jeśli w zestawie brakuje jakiegokolwiek

elementu, skontaktuj się ze Sprzedawcą.

Instalacja i montaż anteny zewnętrznej DWP-

812KT oraz podłączenie jej do routera DIR-825

wymaga wiertarki z wiertłem o średnicy 4mm

oraz wkrętaków Phillips (krzyżowych).

UWAGA: Stosowanie zasilacza o innym napięciu

niż zalecane spowoduje uszkodzenie i utratę

gwarancji na zakupione urządzenia.

Wymagania systemowe

• Safari 8, Google Chrome 48, Microsoft

Internet Explorer 10, Microsoft Edge

20.10240, Mozilla Firefox 44 lub Opera 35

• Komputer PC z portem Ethernet lub

modułem Wi-Fi

Opis urządzenia

DIR-825 Przedni panel

ze wskaźnikami LED

13 4

Rysunek 1: DIR-825 Przedni panel

ze wskaźnikami LED

#LED Opis

1Power Wskazuje czy urządzenie jest podłączone do

źródła zasilania.

2Internet

Nie świeci Wskazuje brak połączenia

kablem Ethernet z anteną

zewnętrzną.

Jednostajne

miganie

Wskazuje poprawne

połączenie kablem z antena

zewnętrzną oraz brak

połączenia z Internetem.

Świeci Wskazuje połączenie z

Internetem oraz brak

transmisji danych.

Szybkie

nieregularne

miganie

Wskazuje połączenie z

Internetem oraz aktywną

transmisję danych.

2 5 6

8Quick Installation Guide

POLSKI

DWP-812KT Przedni panel ze

wskaźnikami LED

PWR

ETH

SIM

Rysunek 3: Interfejsy na przednim panelu

#LED Opis

1RF Wskazuje siłę sygnału LTE. Więcej

słupków oznacza silniejszy sygnał.

2PWR Wskazuje, czyurządzeniejest zasilane.

3ETH

Wskazuje, czy DWP-812KT jest

podłączone do innego urządzenia

przez port Ethernet.

4SIM Wskazuje, czy aktywna karta SIM jest

umieszczona w gnieździe karty SIM.

Tabela 3: DWP-812KT Opis wskaźników

LED na przednim panelu

DWP-812KT Złącza interfejsów

Rysunek 4: DWP-812KT Złącza interfejsów

#Złącze/

Gniazdo

Opis

1Slot karty

SIM

Gniazdo karty 2FF SIM.

2Port LAN Port LAN 10/100/1000 Gigabit

Ethernet.

Tabela 4: DWP-812KT Złącza interfejsów

#LED Opis

3LAN Wskazuje, czy router jest połączony z

urządzeniami poprzez porty LAN.

42.4G/5G

WLAN

Wskazuje, czy moduły Wi-Fi 2,4 GHz i 5 GHz są

włączone czy wyłączone.

5WPS Wskazuje, czy WPS jest włączony.

6USB Wskazuje, czy dysk USB jest podłączony do

DIR-825.

Tabela 1: Opis wskaźników LED na

przednim panelu DIR-825

DIR-825 Złącza na tylnym panelu

urządzenia

LAN4 LAN3 LAN2 LAN1

WAN USB

WPS

WiFi

POWER

- • +

Rysunek 2: Złącza na tylnym panelu urządzenia

#Interfejs Opis

1WIFI Naciśnij, aby włączyć lub wyłączyć Wi-Fi.

2WPS

Naciśnij, aby rozpocząć proces parowania

używając funkcji WPS, celem utworzenia

szyfrowanego połączenia z drugim

urządzeniem.

3Porty LAN Porty LAN 10/100/1000 Gigabit Ethernet.

4Port WAN Port WAN 10/100/1000 Gigabit Ethernet.

5Port USB

2.0

Port USB 2.0 do podłączenia dysku USB.

6Wejście

zasilania

Gniazdo do podłączenia zasilacza.

7Przycisk

zasilania

Naciśnij,abywłączyć lub wyłączyć DIR-825.

Tabela 2: Opis interfejsów na tylnym panelu DIR-825.

2 3 4 5 6 7

1 2

Autres manuels pour SharePort DIR-825

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels D-Link Matériel réseau

D-Link

D-Link ShareCenter DNS-323 Manuel utilisateur

D-Link

D-Link DNS-313 Manuel utilisateur

D-Link

D-Link ShareCenter Pulse DNS-320 Manuel utilisateur

D-Link

D-Link DNS-120 - NAS Server - USB Manuel utilisateur

D-Link

D-Link mydlink DNR-312L Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

D-Link

D-Link DNS-321 - Network Storage Enclosure Hard Drive... Manuel utilisateur

D-Link

D-Link DLB-1200 Manuel utilisateur

D-Link

D-Link DNS-722-4 Manuel utilisateur

D-Link

D-Link DNS-1250-04 Manuel utilisateur

D-Link

D-Link ShareCenter Pro DNS-1550-04 Manuel utilisateur

D-Link

D-Link DNS-323 - Network Storage Enclosure NAS... Manuel utilisateur

D-Link

D-Link DIR-505 Manuel utilisateur

D-Link

D-Link DWL-3150 Manuel utilisateur

D-Link

D-Link DES-1228 - Web Smart Switch Manuel utilisateur

D-Link

D-Link ShareCenter Pulse DNS-320 Manuel utilisateur

D-Link

D-Link mydlink DNR-312L Manuel utilisateur

D-Link

D-Link COVR-P2502 Manuel utilisateur

D-Link

D-Link DXS-3610-54S Manuel utilisateur

D-Link

D-Link DHP-347AV Manuel utilisateur

D-Link

D-Link COVR-3902 Manuel utilisateur

D-Link

D-Link DNS-722-4 Manuel utilisateur

D-Link

D-Link DHP-100 Manuel utilisateur

D-Link

D-Link DFM 562I Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur

Lanner

Lanner NCA-1525 Manuel utilisateur

Cantek

Cantek NR310-4 Manuel utilisateur