D-Link mydlink DNR-202L Manuel
Technical Support Setup Procedure
Page | 1
How to enable or disable manual recording of DNR-202L?
Note: You may download :
-required Firmware
-run the suitable OS wizard setup rom http://sg.mydlink.com/support which will display the
current IP address assigned to the device rom your router:
Locate and run the downloaded Setup Wizard on your computer. Click on START to proceed.
Technical Support Setup Procedure
Page | 2
Ensure that the network ports, HDD(s) and corresponding devices’ power adaptors are connected
and are powered on. Click Next till the current IP address is displayed next to the desired DNR-202L.
Technical Support Setup Procedure
Page | 3
Step 1: Open an Internet browser (such as Internet Explorer) and enter http://< IP Address> into the
address bar.
Step 2: Enter your login in ormation. I you have not changed the de ault settings, the username is
Admin and the password ield should be le t blank. Click Login.
Note :
-
Manual record is
enabled
the manual record button will be RED and
-
Manual record is
disabled
the manual record button will be BLA K.
Step 3:
Click on manual record button to enable/disable manual recording.
--- END ---
Autres manuels pour mydlink DNR-202L
9
Table des matières
Autres manuels D-Link DVR
D-Link
D-Link mydlink DNR-202L/A2A Manuel utilisateur
D-Link
D-Link mydlink DNR-202L Manuel
D-Link
D-Link DNS-726-4 - Network Video Recorder Standalone... Manuel utilisateur
D-Link
D-Link mydlink DNR-202L Manuel utilisateur
D-Link
D-Link mydlink DNR-202L Manuel utilisateur
D-Link
D-Link DNR-326 Manuel utilisateur
D-Link
D-Link mydlink DNR-202L Manuel utilisateur
D-Link
D-Link JustConnect DNR-4020-16P Manuel utilisateur
D-Link
D-Link mydlink DNR-202L Manuel utilisateur
D-Link
D-Link MYDLINK DNR-322L Manuel utilisateur
