D-Link Mydlink DSP-W110 Manuel utilisateur

DSP-W110

Quick Install Guide

mydlink™

Wi-Fi Smart Plug

Package Contents

Minimum Requirements

General Requirements:

• Wireless router (802.11ac/802.11n) with Internet Service

• An available power outlet

Mobile Requirements:

• Mobile device or tablet with iOS 6.0 or above, Android 4.0 or above

If any of the above items are missing, please contact your reseller.

DSP-W110 mydlinkTM Wi-Fi Smart Plug

Quick Install Guide

Quick Install Card

Before you Begin

Plan the location of your Smart Plug devices:

1. Connect Smart Plug devices into electrical outlets that are not

controlled by a wall switch. This will help you to avoid accidentally

turning o power to the device.

2. Verify that your Smart Plug devices are electrically rated to operate with

the power available in your location.

3. Be sure to plug the power cables into properly grounded electrical

outlets in order to help prevent against electrical shock.

Safety

1. Do not open the device or attempt to repair or service it.

2. Use the device in a dry location, and avoid placing it in a humid environment.

3. Do not submerge the device in liquid or attempt to clean it with liquids or

solvents. To clean the device, disconnect from the power outlet and use a

damp towel.

4. This device should only be used indoors.

Hardware Overview

Status LED

Outlet

Reset Button

Front View

WPS Button

ON/OFF Button

& Power LED

WPS Blinking Green

Press for one second to start the WPS

connection process. The Status LED will start

to blink green.

Reset Solid Red

Press and hold until the Status LED turns red

in order to reset the device back to the factory

default settings (for about 10 seconds).

ON/OFF Button Press to turn the device connected to the DSP-W110 ON or OFF.

Status LED

Solid Green The Smart Plug is successfully connected to

your network.

Blinking Green The WPS process is in progress.

Blinking Orange The Smart Plug is not properly connected to

your wireless network.

Solid Red The Smart Plug is powering on, attempting to

reset, or the device is defective.

O If the Smart Plug will not power on, try

plugging the Smart Plug into another outlet.

Power LED

Solid Green The electronic device you plugged into your

Smart Plug is powered on.

O The device you plugged into your Smart Plug

is turned o or not receiving power.

Outlet Connect your appliances, lamps, and other electronic devices you

wish to control.

Installation

Download the free mydlinkTM Home app from the App Store (iOS) or Google

Play (Android).

First install the mydlinkTM Home app on your mobile device.Then simply tap

on the icon to launch the app.

4Once the conguration process is complete, use the mydlinkTM Home

app to control your home’s electronic devices from anywhere.

3Log into your mydlinkTM account. If you don’t have one, sign up for a free

mydlinkTM account by tapping the Sign Up! link.

If there are no other mydlinkTM

devices in your account, tap Add a

new device.

If there are existing mydlinkTM

devices in your account, tap the gear

icon in the upper-left hand corner

and then tap Add new devices.

Then follow the on-screen instructions. The wizard will guide you through

the conguration process for your DSP-W110.

FAQs

1. How do I reset the DSP-W110?

When you reset your DSP-W110, it will change your

settings back to the factory default settings. To reset

the device, locate the Reset button on the side of the

device. With the device plugged in, press and hold the

Reset button until the status LED turns red (for about

10 seconds).

Reset

2. Why isn’t the Power LED turning on when I plug in my Smart Plug?

If the Power LED is not turning on:

a. Press the ON/OFF button on the front of the Smart Plug.

b. Make sure the outlet is working properly. Try plugging in another

device to see if it works.

c. Make sure that if the outlet is controlled by a light switch, it is in

the ON position.

d. Try a dierent outlet to see if the Smart Plug works there.

3. Why can’t I connect to my wireless router?

If you are having trouble connecting to your wireless router, try plugging

the DSP-W110 into a location that is closer to your router. After the Status

LED turns solid green, you can unplug the Smart Plug and move it to the

desired location.

4. Where can I nd the mydlinkTM Home app?

You may download the free mydlinkTM Home app from the App store (iOS) or

Google Play Store (Android). Search for the mydlinkTM Home app by typing

in“mydlink Home”.

5. How do I set up a schedule for my smart plug?

Open the mydlink Home app, tap on the smart plug you want to set a

schedule for. Tap“Schedule”and then tap on the circle on the schedule you

want activated, then tap the back button to save and activate the schedule.

GPL Code Statement

This D-Link product includes software code developed by third parties, including

software code subject to the GNU General Public License (“GPL”) or GNU Lesser

General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL,

and information on obtaining access to the GPL code and LGPL code used in this

product, are available to you at:

http://tsd.dlink.com.tw/GPL.asp

The GPL code and LGPL code used in this product is distributed WITHOUT ANY

WARRANTY and is subject to the copyrights of one or more authors. For details,

see the GPL code and the LGPL code for this product and the terms of the GPL and

LGPL.

Written Oer for GPL and LGPL Source Code

Where such specic license terms entitle you to the source code of such software,

D-Link will provide upon written request via email and/or traditional paper mail the

applicable GPL and LGPLsource code les via CD-ROM for a nominal cost to cover

shipping and media charges as allowed under the GPL and LGPL.

Please direct all inquiries to:

Email:

GPL[email protected]

Snail Mail:

Attn: GPLSOURCE REQUEST

D-Link Systems, Inc.

17595 Mt. Herrmann Street

FountainValley, CA 92708

GNU GENERAL PUBLIC LICENSE

Version 3, 29 June 2007

View the full GPL Code Statement at http://www.gnu.org/licenses/gpl.html

Technical Support

This guide is only for the rst time conguration. Refer to the user manual to learn

more. We also oer FAQs, videos, live chat, email support, and telephone support on

our website.

Version 1.00(NA)_90x130

Aug 20, 2014

PMQSPW110EX104

Canada

http://support.dlink.ca/DSP-W110

D-Link Corporation or its subsidiaries. All other third-party marks mentioned herein may be trademarks of their

respective owners. This publication may not be reproduced, in whole or in part, without prior express written

permission from D-Link Systems, Inc.

DSP-W110

Guide d’installation

rapide

mydlinkMC

Prise intelligente Wi-Fi Smart Plug

Contenu de la boîte

Exigences minimales

Exigences générales:

• Routeur sans l (802.11ac/802.11n) avec service Internet

• Une prise de courant disponible

Exigences relatives aux appareils mobiles:

• Appareil mobile ou tablette avec iOS 6.0 ou une version supérieure,

Android 4.0 ou une version supérieure

Contactez votre revendeur s'il manque l'un des éléments ci-dessus.

Prise intelligente mydlinkMC Wi-Fi Smart Plug DSP-W110

Guide d’installation rapide

Carte d’installation rapide

Autres manuels pour mydlink DSP-W110

Table des matières

Langues :

Autres manuels D-Link Adaptateur

D-Link

D-Link AirPlusXtremeG DWL-G650 Manuel utilisateur

D-Link

D-Link DHP-310AV Manuel utilisateur

D-Link

D-Link DSM-910BT Manuel utilisateur

D-Link

D-Link Air DWL-650 Manuel utilisateur

D-Link

D-Link DUB-1210 Manuel utilisateur

D-Link

D-Link D DPH-50U DPH-50U Manuel d'instructions

D-Link

D-Link DHP-W610AV Manuel utilisateur

D-Link

D-Link DVG-2001S Manuel utilisateur

D-Link

D-Link AirPlus DWL-120+ Manuel utilisateur

D-Link

D-Link DWL-AG132 Manuel utilisateur

D-Link

D-Link DWA-131 Manuel utilisateur

D-Link

D-Link DVG-5121SP Manuel utilisateur

D-Link

D-Link AirPlus Xtreme G DWL-G650 Manuel utilisateur

D-Link

D-Link XTREME N DUAL BAND USB ADAPTER DWA-160 Manuel utilisateur

D-Link

D-Link DVG-7111S Manuel utilisateur

D-Link

D-Link PowerLine DHP-500AV Manuel utilisateur

D-Link

D-Link DUB-E100 Manuel utilisateur

D-Link

D-Link DGE-530T Manuel utilisateur

D-Link

D-Link DSD-150 - SecureSpot Internet Security... Manuel utilisateur

D-Link

D-Link DGE-530T Manuel utilisateur

D-Link

D-Link DHP-308AV Manuel utilisateur

D-Link

D-Link DCF-650BT Manuel utilisateur

D-Link

D-Link DWL-P200 Manuel utilisateur

D-Link

D-Link DHP-541 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur

RCA

RCA AH57R Manuel utilisateur

D-Link mydlink DSP-W110 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques