D-Link DHN-520 Manuel utilisateur
6DHN520…02
Printed in Taiwan
RECYCLABLE
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
Introduction 1
Thank you for choosing the D-Link DHN-520. As a leading
network manufacturer, D-Link is dedicated to making the
best cost/performance adapter on the market. This
introduction will be useful if you are new to phoneline
networking and other new technologies featured in the
D-Link DHN-520. For more information on D-Link and
D-Link products go to <http://www.dlink.com>.
HomePNA 1.0 is a standard defined and ratified by the
Home Phoneline Networking Association (HomePNA).
Currently HomePNA 2.0 is scheduled to be ratified in the
fourth quarter of 1999. The DHN-520 was designed around
the proposed iLine10standard, which was accepted by
the HomePNA on July 27, 1999 as the basis for HomePNA
2.0. At the time of this manual’s printing HomePNA 2.0 has
not been officially ratified.
Home Phoneline Networking allows a home user to build a
network utilizing their standard home phonelines. It
removes the need to install separate hardware or specialty
cables as is required by other networking technologies.
With a full 10 megabits per second (Mbps) of bandwidth,
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
Introduction2
the data throughput speed is effectively 150-200 times
faster than a V.90 modem.
This technology will allow a Microsoft Windows 95 OSR2,
Windows 98 or Windows NT (and the future Windows 2000)
user to quickly share files and printers. Users can play
multi-player network games and share Internet access by
using additional software.
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
Introduction 3
Designed for versatility and performance, the D-Link
DHN-520 provides the following features:
• Backward compatibility with older 1-Mbps HomePNA
1.0 certified hardware
• Operates in a PCI Bus Master slot of a Pentium/
Pentium Pro/Pentium II computer, independent of CPU
speed.
• PCI Bus Master memory access, for high throughput
and low CPU demand.
• Plug-and-play installation.
• 10-Mbps throughput over standard home phonelines
• Three LED indicators: Link, Activity
• Drivers for Windows 95 OSR2, Windows 98, Windows
NT, and beta drivers for Windows 2000.
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
Installation4
Installation of a D-Link DHN-520 10-Mbps Home Phoneline
Network Adapter requires hardware installation first, then
software installation.
Under ordinary circumstances, your D-Link DHN-520
will not be affected by static charges such as may be
received through your body during handling of the
unit. In special circumstances where you might carry
an extraordinarily high static charge, it is good
practice to reduce the charge by touching a
grounded object before handling the adapter.
Open the shipping carton and carefully remove all items. In
addition to this user's guide, ascertain that you have:
• One DHN-520 home phoneline network adapter.
• One DHN-520 software CD.
• One phoneline cable.
• One D-Link DHN-520 User’s Guide (this manual)
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
Installation 5
1. Shut down the computer, unplug its power cord, and
remove the cover.
2. Insert the DHN-520’s board-edge contacts into any
available PCI Bus Master expansion slot. Press the
adapter firmly into the slot, making sure the contacts
are firmly seated.
3. Install the bracket screw that secures the card to the
computer chassis.
4. Replace the computer's cover.
5. Reconnect the computer's power cord and turn the
computer on. If your computer’s BIOS is plug-and-play
compliant, it will automatically configure the DHN-520
upon power-up.
!
"
# $% &
D-Link DHN-520 10Mb Home Phoneline Network Adapter for the PCI Bus
Installation6
Standard phoneline cable can be used to either connect the
adapter to a phoneline wall jack, or to another adapter. It is
important to note that when two adapters are connected
directly, a second cable must be used to connect the
computers to an active phoneline. The adapter requires the
voltage running in an active phoneline to operate properly.
On account of the great variety of network environments for
which the DHN-520 may be used, and revisions of those
network systems, the instructions for software installation
are given as HELP files on the DHN-520 Software CD.
Review the root directory HELP for overview information,
and for full installation details, see the HELP and
referenced instruction files in the sub-directory appropriate
to your network operating system.
Additionally, on the Driver CD we have provided an HTML
manual designed for our DHN-910 10-Mbps Home
Phoneline Network in a Box. It is an HTML rendered copy
of the full Quick Starter Guide that accompanies the
network kit. Simply open the StartHere.htm file in the
/Manual subdirectory provided on the CD to launch and
view through your web browser.
Autres manuels pour DHN-520
1
Autres manuels D-Link Adaptateur
D-Link
D-Link AirPlus DWL-650+ Manuel utilisateur
D-Link
D-Link DWA-171 Manuel utilisateur
D-Link
D-Link DWA-643 Manuel utilisateur
D-Link
D-Link DVG-2001S Manuel utilisateur
D-Link
D-Link Air DWL-120 Manuel utilisateur
D-Link
D-Link DBT-122 Manuel utilisateur
D-Link
D-Link DUB-V120 Manuel utilisateur
D-Link
D-Link DGE-530T Manuel utilisateur
D-Link
D-Link DHP-310AV Manuel utilisateur
D-Link
D-Link PersonalAir DBT-120 Dimensions
D-Link
D-Link DWA-171 Manuel utilisateur
D-Link
D-Link DWM-157 Manuel utilisateur
D-Link
D-Link Air DCF-660W/K Manuel utilisateur
D-Link
D-Link WDA-2320 RangeBooster G Manuel utilisateur
D-Link
D-Link DWL-P100 Manuel utilisateur
D-Link
D-Link VTA-VR Manuel utilisateur
D-Link
D-Link DWA-162 Manuel utilisateur
D-Link
D-Link DWA-142 Manuel utilisateur
D-Link
D-Link 802.11g Wireless LAN USB Adapter DWL-G122 Manuel utilisateur
D-Link
D-Link DWA-552 Manuel utilisateur
