CYP SY-P290 Manuel utilisateur
OPERATION MANUAL
SY-P290
PC/DVD/HD to HDMI Scaler
Finden Sie ab Seite 5.
Precautions
Failure to follow the precautions described below may cause damage to this device
and void the warranty.
• DO NOT open the case. This will void the warranty, if you nd a problem with
this product, please return it to your retailer or seller who will assist you or
provide you with a solution.
• DO NOT use third-Party AC adaptors or power cords. This may damage the
Matrix.
• DO NOT bump, jar or drop the product because it may cause damage and void
the warranty.
• DO NOT allow liquids to come into contact with the Matrix because they may
cause damage.
1. Introduction 1
2. Application 1
3. Package Contents 1
4. System Requirements 2
5. Features 2
6. Operation Controls and Functions 3
6.1 Front Panel 3
6.2 Rear Panel 4
7. Connection Diagram 5
8. Specications 6
Table of Contents
Finden Sie ab Seite 9.
1. Introduction
This Scaler device is designed to display your PC/HD images on a HDTV at a
higher resolution. It can upscale PC/DVI /HD (component) input sources to a wide
range of PC/HD resolutions and output the signal via HDMI. The supported output
resolutions are XGA/UXGA/720p and 1080p.
This unit allows the user to select the required output resolution for the best
picture quality. It will also transfer the signal at the analogue/digital audio input to
the HDMI output.
2. Applications
• Individual home use
• Classroom presentations
• Meeting demonstrations
• Gaming / entertainment
3. Package Contents
• SY-P290 Scaler
• Power adaptor
• Operation Manual
Page 1
Page 2
4. System Requirements
• Source with PC,DVI-D or Component output and HDTV/Monitor.
• RCA - D-SUB cable (for connecting component sources) / D-SUB to D-SUB cable
for connecting a PC, DVI/HDMI to DVI-D cable for connecting a HDMI source to
the input or a DVI display.
• Coaxial or audio phono jack cable for connecting either analogue or digital
audio output from your source.
5. Features
• HDMI 1.2, HDCP 1.1 and DVI 1.0 compliant.
• Inputs Support the following PC/HD TV resolutions:
DVI: VGA~WUXGA
PC: VGA~WUXGA
• HD TV: 480i~1080p50/60Hz
• Scale any supported resolution to XGA/UXGA/720p/1080p ).
• Supports PC&DVI to HDMI output.
• Transfer L/R or coaxial audio input to HDMI.
• Input and output selection buttons for quick and easy operation.
Page 3
6. Operation Controls and Functions
6.1 Front Panel
1. DVI-D IN: Connect the DVI (29 pin) port to the DVI output port of your source
equipment such as a PC. Supported Resolutions: VGA~ WUXGA
Note:DVI-DinputcanonlyacceptaDVI-Dsignal.
2. PC/HD input: Connect the PC input D-Sub (15-pin) port to the D-Sub output
port of your source equipment such as a PC or use a D-Sub to 3RCA cable to
connect to a component video source such as a DVD player.
Supported PC Resolutions: VGA~ WUXGA
Supported Component Resolutions: 480i~1080i, 1080P 50/60
Note:Outputtiming1080p50HzmaynotbesupportedbysomeTVwhentheinputis
576i/p50,720p50and1080i/p50.
3. Power: Plug the 5VDC power supply into the unit and connect the
adaptor to an AC wall outlet.
1 2 3
DVI-D PC/HD
DC 5V
VIDEO IN
6.2 Rear Panel
1. Coaxial input: Connect the coaxial audio output of the source device to this
input.
2. L/R audio input (3.5mm): Connect the L/R audio from the source device to this
input.
3. HDMI output: Connect to your displays hdmi input
4. Audio input Select button: Press the button to access the menu and select
which audio input (Coaxial or L/R) you want to transfer to the HDMI output.
5. Video Input Select button: Press the button to access the menu and select
between the DVI or PC/HD video as the input source.
6. Output Timing button : Press this button to access the menu and select 720p /
1080p / XGA /UXGA as the output resolution.
Notes:
• Only when HDMI signal is send the selection of audio under HDMI will appear
on the display and the audio will support PCM 2ch.
• Press the ‘audio’ and ‘video’ buttons simultaneously to set the output to XGA.
• Press the ‘audio’ and ‘timing’ buttons simultaneously to set the output to 720p.
1
COAXIAL
AUDIO VIDEO TIMING
L/R
AUDIO IN INPUT OUTPUTHDMI
OUT
2 3 4 5 6
Page 4
Page 5
7. Connection Diagram
8. Specications
Input ports
1 x PC/HD
1 x DVI-D
1 x Coaxial Audio
1 x L/R Audio
Output ports 1 x HDMI
Power Supply 5V/2.6A DC (US/EU standards, CE/FCC/UL certied)
Dimensions (mm) 102 (W) x 160 (D) x 25 (H)
Weight (g) 332
Chassis Material Aluminium
Silk Skin Colour Black
Operating Temperature Operating from 0°C ~ 40°C
Page 6
www.cypeurope.com
Autres manuels pour SY-P290
2
Table des matières
Autres manuels CYP Convertisseur de média
CYP
CYP AU-D6-192 Manuel utilisateur
CYP
CYP CP-261H Manuel utilisateur
CYP
CYP CLUX-DVI2SDIA Manuel utilisateur
CYP
CYP CMDPH-1A Manuel utilisateur
CYP
CYP AU-D1D Manuel utilisateur
CYP
CYP AU-D9 Manuel utilisateur
CYP
CYP CSDI-12SR Manuel utilisateur
CYP
CYP CLUX-SDI2HS Manuel utilisateur
CYP
CYP CSC-6013 Manuel utilisateur
CYP
CYP CV-400H Manuel utilisateur
CYP
CYP CS-802D Manuel utilisateur
CYP
CYP CP-295NN Manuel utilisateur
CYP
CYP CDPS-US100R Manuel utilisateur
CYP
CYP CVMDP-1080P Manuel utilisateur
CYP
CYP CSDI-12SR Manuel utilisateur
CYP
CYP CPT-385AMN Manuel utilisateur
CYP
CYP PRO-SDI2H Manuel utilisateur
CYP
CYP CDPV-1A Manuel utilisateur
CYP
CYP CPRO-12ES Manuel utilisateur
CYP
CYP CPT-386 Manuel utilisateur
