CYP CDPV-1A Manuel utilisateur
CDPV-1A
DisplayPort to VGA Converter
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
V1 07/16/10 Preliminary Release
VS2 30/08/12 Updated format/texts
CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Specications ........................................ 2
7. Operation Controls and Functions....... 3
7.1 Front Panel ........................................3
7.2 Rear Panel.........................................3
8. Connection and Installation................. 4
9. Acronyms ............................................... 5
1
1. INTRODUCTION
The DisplayPort to VGA Converter allows digital DisplayPort signal
to be converted into analog VGA signal, supporting Display Data
Channel (DDC) and auto-detecting the connected display. Use the
DisplayPort to VGA Converter to connect a VGA monitor to display
DisplayPort signal.
2. APPLICATIONS
• Mini-DisplayPort to HDMI signal conversion
• Display MAC/PC/NB content on HDTV
3. PACKAGE CONTENTS
• 1×DisplayPort to VGA Converter
• Operation Manual
4. SYSTEM REQUIREMENTS
DisplayPort equipped source devices and VGA equipped displays (TVs
or monitors) connect with related cable.
5. FEATURES
• DisplayPort 1.1a compliant
• Supports DisplayPort 1-Lane or 2-Lane and 1.62/2.7 Gbps data rate
• Supports output resolutions up to 1920×1200@60 Hz
• Supports digital to analog (VGA) conversion at 24-bit
• Stylish design
• Plug and Play
• No software installation required
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
1
1DisplayPort Input
Connect to the DisplayPort equipped source device such as PC
or Laptop. Hold the top button to safely remove the unit from the
source device.
6.2 Rear Panel
2
1VGA Output
Connect to VGA equipped displays such as a TV or monitor.
3
7. CONNECTION DIAGRAM
NB
TV Monitor
PC
or
or
Projector
or
4
8. SPECIFICATIONS
Frequency Bandwidth 2.7Gbps (single link)
Input Port 1 x DisplayPort
Output Port 1 x VGA
DP Input Resolution 640 x 480 ~ 1920 x 1200(Reduced
Blanking), VGA ~WUXGA
VGA Output Resolution 640 x 480 ~ 1920 x 1200(Reduced
Blanking), VGA ~WUXGA
ESD Protection Human body model:
± 10kV (air-gap discharge)
± 6kV (contact discharge)
Dimensions (mm) 68(W) x 34(D) x 19.8(H)
Weight(g) 20
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0ºC ~ 40ºC / 32ºF ~ 104ºF
Storage Temperature -20ºC ~ 60ºC / -4ºF ~ 140ºF
Relative Humidity 20% ~90% RH (non-condensing)
Power Consumption 2.5W
5
9. ACRONYMS
ACRONYM COMPLETE TERM
DP DisplayPort
VGA Video Graphic Array
Table des matières
Autres manuels CYP Convertisseur de média
CYP
CYP CS-720PHD1 Manuel utilisateur
CYP
CYP AU-D3 Manuel utilisateur
CYP
CYP CPT-2370 Manuel utilisateur
CYP
CYP CH-507RXWP Manuel utilisateur
CYP
CYP CM-388M Manuel utilisateur
CYP
CYP CPRO-11SI Manuel utilisateur
CYP
CYP CPLUS-V10E Manuel utilisateur
CYP
CYP CLUX-DVI2SDIA Manuel utilisateur
CYP
CYP AU-D9 Manuel utilisateur
CYP
CYP DCT-3 Manuel utilisateur
CYP
CYP CPRO-12ES Manuel utilisateur
CYP
CYP CP-302MN Manuel utilisateur
CYP
CYP CETH-4HDI Manuel utilisateur
CYP
CYP CPCD-3A Manuel utilisateur
CYP
CYP SY-HDVGA-4K22 Manuel utilisateur
CYP
CYP AU-D4T Manuel utilisateur
CYP
CYP CLUX-2HPIP Manuel utilisateur
CYP
CYP AU-11SA Manuel utilisateur
CYP
CYP nT15FX06 Manuel utilisateur
CYP
CYP CP-251F Manuel utilisateur
