CYP CSC-5501 Manuel utilisateur

CSC-5501

HDMI/DP/VGA to Dual HDMI Scaler

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document are

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

• Please completely disconnect the power when the unit is not in

use to avoid wasting electricity.

VERSION HISTORY

REVISION DATE SUMMARY OF CHANGE

VS1 09/11/18 Final technical review

CONTENTS

1. Introduction......................................................1

2. Applications.....................................................1

3. Package Contents ..........................................1

4. System Requirements......................................2

5. Features............................................................2

6. Operation Controls and Functions.................3

6.1 Front Panel ................................................. 3

6.2 Rear Panel.................................................. 4

6.3 Remote Control......................................... 5

6.4 OSD Menu.................................................. 6

6.5 WebGUI Control ...................................... 21

6.6.1 Main Page 0 ................................... 22

6.6.2 Main Page 1 ................................... 24

6.6 RS-232 Control ......................................... 26

6.7 Telnet Control .......................................... 26

6.8 RS-232 and Telnet Commands .............. 27

7. Connection Diagram ....................................46

8. Specications ................................................47

8.1 Technical Specications ........................ 47

8.2 Video Specications............................... 48

8.3 Audio Specications............................... 49

8.4 Cable Specications .............................. 50

9. Acronyms .......................................................51

1. INTRODUCTION

This Multi-Format Scaler has DisplayPort, HDMI and PC (VGA) inputs

which can be freely selected for output at a scaled resolution of the

user’s choosing over the mirrored HDMI outputs. This unit also includes

breakout analog and digital audio outputs to provide additional

playback exibility. Support for HDMI output resolutions up to 1080p/

WUXGA (RB) and Analog to Digital Conversion (ADC) functionality

combine to allow for a wide range of AV signals to be displayed on

the connected HDMI displays.

Beyond video switching and scaling, this unit also features useful audio

functions. An integrated audio DSP with gain control for routing audio

and controlling background audio levels (LPCM 2.0 only) adds to the

versatility of this product. This unit can be controlled via front panel

buttons with an On-Screen Display (OSD), WebGUI, Telnet, and RS-232

making it exceptionally versatile.

2. APPLICATIONS

• Analog and Digital source integration

• Upscaling standard denition sources for high-denition displays

• Conference centers

• Lecture halls

• Schools and universities

3. PACKAGE CONTENTS

• 1×HDMI/DP/VGA to Dual HDMI Scaler

• 1×24V/2.7A DC Power Adapter

• 1×Power Cord

• 1×Remote Control (CR-176)

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

• HDMI, DisplayPort or VGA source equipment such as media players,

video game consoles, PCs, or set-top boxes.

• HDMI receiving equipment such as HDTVs, monitors or audio

ampliers.

• The use of “Premium High Speed HDMI” cables is highly

recommended.

5. FEATURES

• HDMI 1.3, DisplayPort 1.1, and DVI 1.0 compatible

• HDCP 1.x compliant

• Multiple video and audio inputs: 1 DisplayPort, 2 HDMI, 2 VGA, and

3 stereo audio

• Mirrored HDMI outputs

• Supports input and output resolutions up to 1080p/WUXGA (RB)

• Frame rate conversion support

• Analog to digital (ADC) and digital to analog (DAC) audio

conversion, insertion and extraction

• Analog stereo and digital coaxial breakout audio outputs

• Supports pass-through of LPCM 2.0 audio

• Audio DSP with gain control for routing audio and controlling

background audio levels

• Comprehensive EDID and HDCP management

• Remote control provides discrete input source selection

• Controllable via front panel controls with OSD, RS-232, Telnet,

WebGUI, and IR remote

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1122

POWERDP HDMIVGA

MENU– +ENTER

XGA

720P

Multi-Format to HDMI Scaler

1 2 3 54 6

1POWER Button & LED: Press this button to power the unit on (Green

LED) or place it into stand-by mode (Red LED).

2IR Window: Accepts IR signals from the included IR remote for

control of this unit only.

3DP/HDMI 1~2/VGA 1~2 Buttons & LEDs: Press any of these buttons

to switch immediately to the corresponding input. An LED will

illuminate to indicate which source is currently selected.

4MENU Button: Press to enter the OSD menu, or to back out from

menu items.

Note: Pressing and holding the “MENU” button while connecting

the power supply will reset all settings to the factory defaults.

Pressing “MENU” and “+” together will reset the output resolution to

XGA (1024×768@60Hz). Pressing “Menu” and “−“ together will reset

the output resolution to 720p@60Hz.

5 − (MINUS) & + (PLUS) Buttons: Press to move up and down or adjust

selections within menus.

Note: When not in the OSD, pressing “−” will activate the Auto

Adjust function for VGA sources. Pressing “+” will briey show the

OSD information display.

6ENTER Button: Press to conrm a selection within the OSD or to go

deeper into a menu item.

6.2 Rear Panel

CONTROL

SERVICE RS-232

INPUT OUTPUT

HDMI BHDMI A

AUDIOAUDIOCOAX

DC 24V

HDMI

DP 1122

AUDIO

VGA

V+

GND

GND GND

V+

621

34 5

1DP INPUT Port: Connect to DisplayPort source equipment such as a

PC or laptop.

Note: In some rare cases, digital DisplayPort audio can’t be

supported. In those cases, please use analog audio input 1.

HDMI INPUT 1~2 Ports: Connect to HDMI source equipment such as

media players, game consoles or set-top boxes.

VGA INPUT 1~2 Ports: Connect to VGA source equipment such as

PCs or laptops.

AUDIO INPUT 1~3 Ports: Connect to the stereo analog outputs of

devices such as CD players or PCs.

Note: In “Audio Follows Video” mode, Audio 1 maps to the digital

inputs (DisplayPort, HDMI 1 & HDMI 2), Audio 2 maps to VGA 1 and

Audio 3 maps to VGA 2.

2HDMI A~B OUTPUT Ports: Connect to HDMI TVs, monitors or

ampliers for digital video and audio output.

Note: Both outputs carry the same video and audio content.

AUDIO 1~2 OUTPUT Ports: Connect to powered speakers or an

amplier for stereo analog audio output.

Note: Both outputs carry the same audio content.

COAX OUTPUT Port: Connect to powered speakers or an amplier

for digital audio output using an appropriate coaxial cable.

3SERVICE Port: This slot is reserved for rmware update use only.

4RS-232 Port: Connect directly to a PC, laptop or other serial control

device to send RS-232 commands to control the unit.

5CONTROL Port: Connect directly, or through a network switch, to

your PC/laptop to control the unit via Telnet/WebGUI.

6DC 24V Port: Plug the 24V DC power adapter into this port and

connect it to an AC wall outlet for power.

6.3 Remote Control

1POWER: Press this button to power the unit

on or place it into stand-by mode.

2DP/HDMI 1~2/PC 1~2: Press any of these

buttons to switch immediately to the

corresponding input.

3MENU: Press this button to enter the OSD

menu.

4EXIT: Press this button to exit the menu or

the current selection in the OSD menu.

5 OK/▲/▼/◄/► & VOL/−/+: Press OK to

conrm the selection or press the arrow

buttons to navigate the OSD menu. When

the OSD menu is not active, use the LEFT/

RIGHT (◄/►) buttons to control the volume

level.

6AUTO ADJUST: Press this button to activate the Auto Adjust function

for VGA sources.

7RESET: Press this button to reset the device back to the default

settings.

CR-176

POWER

PC 1PC 2

HDMI 1HDMI 2DP

VOL

EXIT

RESET

AUTO

ADJUST

Table des matières

Autres manuels CYP Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur

Expert

Expert EX-9543 Manuel utilisateur