CYP CS-802D Manuel utilisateur
CS-802D
mDP/DVI-DL/VGA to HDMI Scaler
Operation Manual
Operation Manual
DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2017 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.
SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE
VR0 03/09/13 Preliminary release
VS1 09/12/14 Updated text/diagrams
VS2 30/03/17 Updated formatting
CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................1
5. Features............................................................1
6. Operation Controls and Functions.................2
6.1 Front Panel ................................................. 2
6.2 Rear Panel.................................................. 3
6.3 Remote Control......................................... 4
6.4 OSD Menu.................................................. 5
6.5 RS-232 Protocol.......................................... 6
6.6 RS-232 and Telnet Commands ................ 7
7. Connection Diagram ......................................9
8. Specications ................................................10
8.1 Technical Specications ........................ 10
8.2 Video Specications............................... 11
8.3 Audio Specications............................... 12
9. Acronyms .......................................................13
1
1. INTRODUCTION
This HDMI Scaler can switch and convert Dual-link DVI, Mini DisplayPort
and VGA/Component Video inputs to an HDMI output, along with
their associated audio signals. With the ability to scale a wide range
of resolutions, the operation of all features can be easily handled
through on-panel controls, IR remote control, or by RS-232 protocol.
2. APPLICATIONS
• Scale Dual-link DVI, Mini DisplayPort and VGA/Component Video
input resolutions to HDMI output resolutions
• Convert Dual-link DVI, Mini DisplayPort, VGA and Component Video
signals to HDMI signal
• Commercial presentation switching scaler
3. PACKAGE CONTENTS
• 1×mDP/DVI-D/VGA to HDMI Scaler
• 1×Remote Control (CR-123)
• 1×5V/2.6A DC Power Adaptor
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
Dual-Link DVI/Mini DisplayPort/PC/YUV sources and output to an HDMI
display.
5. FEATURES
• Supports Dual-link DVI and Mini DisplayPort input resolutions up
to 2560×1600@60Hz (RB), PC up to 1920×1200@60/75Hz and
Component Video up to 1080p@50/60Hz
• Supports digital and analog audio bi-directional conversion,
embedding and de-embedding for the audio signals from individual
inputs
• Supports Component Video input via D-sub 15-pin to 3 RCA phono
adaptor
2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
ENTER
MENU/
OPTICAL
OUT
IN
AUDIO HDMI OUT
DC 5V
POWER
OPTICAL AUDIO
XGA
720P
3
6
2 4
7
5 8 9 101
1MENU/ENTER: Press this button to ENTER the On-screen Display (OSD)
menu. Press again to conrm the selection.
2 −/IN: When in the OSD menu, press this button repeatedly to move
down through the menu. When not in the OSD menu, press this
button to quickly select the required input.
3+/OUT: When in the OSD menu, press this button repeatedly to
move up through the menu. When not in the OSD menu, press this
button to quickly select the required output resolution.
Note:Pressing“−”(MINUS)and“ENTER”simultaneouslywill
immediatelyswitchtheoutputresolutionofthedeviceto
720p@60Hz.Pressing“+”(PLUS)and“ENTER”simultaneouslywill
immediatelyswitchtheoutputresolutionofthedevicetoXGA.
4OPTICAL IN: Digital audio TOSLINK input. Use this input to connect
to a source with an OPTICAL cable.
5AUDIO IN: Analog audio input. Use this input to connect to analog
source with a 3.5mm mini-jack cable.
6OPTICAL OUT: Digital audio TOSLINK output. Use this output to
connect to an Amplier or Active Speakers to an optical digital
input with an OPTICAL cable.
7AUDIO OUT: Analog audio output. Use this output to connect to
Active Speakers or an Amplier with a 3.5mm mini-jack cable.
8HDMI OUT: Connect to a HDMI equipped TV/monitor for display of
the source signal.
3
9IR WINDOW: Receives the IR signal from the supplied IR Remote
only.
10 DC 5V & POWER LED: Connect the supplied 5V DC power supply
to the unit and plug the power supply to AC wall outlet. Once the
system turns on the LED will turn RED.
6.2 Rear Panel
RS232
SERVICE MDP
Dual-Link DVI PC/COMP
IN
21 3 4 5
1RS232: Connect to a PC or RS-232 control system with a D-sub 9-pin
cable for RS-232 control.
2SERVICE: Manufacturer use only.
3MDP IN: Connect to a DisplayPort source device such as a PC/
laptop with a mini-DisplayPort cable.
4Dual-Link DVI IN: Connect to a DVI source device such as a PC/
laptop with a DVI cable.
5PC/COMP IN: Connect to a VGA source such as a PC/laptop
source equipment with a D-sub 15-pin cable or to a Component
Video source with a D-sub 15-pin to 3 RCA phono adaptor for
component video signal input.
4
6.3 Remote Control
1POWER: Press to turn the system
ON/OFF.
2VIDEO IN: Press the required
key to directly select the video
source (DVI/MDP/PC/COMP).
3AUDIO IN: Press the required
key to directly select the audio
source (AUDIO/OPTICAL/MDP)
or to MUTE the system.
4MENU: Press this button to
ENTER the OSD menu.
5EXIT: Press this button to EXIT the OSD menu.
6 ENTER & ▲/▼/◄/►: Press ENTER button to conrm the selection
and press the arrow keys to navigate the OSD menu.
7INFO: Press to show the input and output resolution information.
8OUTPUT: Press to show the output resolution table.
9NATIVE: Press to switch to the native resolution.
MDP
MENU
OUTPUTINFO
DVI
PC
AUDIO
MUTE
EXIT
NATIVE
MDP
COMP
OPTICAL
ENTER
CR-123
AUDIO IN
VIDEO IN
2
3
4
8
9
5
1
7
6
5
6.4 OSD Menu
LEVEL 1 LEVEL 2 LEVEL 3
Input Video PC
COMP
DVI
MDP
Exit
Input Audio Audio
Optical
MDP
Mute
Exit
Output Resolution 720×480P
1280×720P
1920×1080P
640×480 (VGA)
800×600 (SVGA)
1024×768 (XGA)
1280×1024 (SXGA)
1600×1200 (UXGA)
1920×1200 (WUXGA)
1280×800 (WXGA)
By Native
Exit
Misc. Setup EDID Mode Internal
External
Exit
Info. OSD Mode Off
On
Autres manuels pour CS-802D
2
Table des matières
Autres manuels CYP Convertisseur de média
CYP
CYP CP-304 Manuel utilisateur
CYP
CYP CM-345S Manuel utilisateur
CYP
CYP CH-520TXAHS Manuel utilisateur
CYP
CYP CSC-V102P Manuel utilisateur
CYP
CYP CDPS-6H2HFS Manuel utilisateur
CYP
CYP SY-P295N Manuel utilisateur
CYP
CYP CP-251F Manuel utilisateur
CYP
CYP CP-267 Manuel utilisateur
CYP
CYP SY-HDVGA-4K22 Manuel utilisateur
CYP
CYP CPRO-11SI Manuel utilisateur
CYP
CYP CLUX-14S Manuel utilisateur
CYP
CYP CSC-5500 Manuel utilisateur
CYP
CYP DCT-9DD Manuel utilisateur
CYP
CYP CM-330 Manuel utilisateur
CYP
CYP CM-1391 Manuel utilisateur
CYP
CYP CM-397M Manuel utilisateur
CYP
CYP CPT-387HD Manuel utilisateur
CYP
CYP CP-293 Manuel utilisateur
CYP
CYP DCT-40 Manuel utilisateur
CYP
CYP CM-388 Manuel utilisateur
