CYP CP-293N Manuel utilisateur

CP-293N

PC/HD to HDMI Scaler

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE (DD/MM/YY) SUMMARY OF CHANGE

VR0 11/08/14 Preliminary Release

VR1 25/12/14 Add Audio Cable

VR2 13/01/15 D-sub Cable Type

VS3 14/01/16 Updated Text/Diagrams

CONTENTS

1. Introduction............................................ 1

2. Applications........................................... 1

3. Package Contents ................................ 1

4. System Requirements............................ 1

5. Features.................................................. 2

6. Operation Controls and Functions....... 3

6.1 Front Panel ........................................3

6.2 Rear Panel.........................................4

6.3 OSD Menu.........................................5

7. Connection Diagram ............................ 7

8. Specications ........................................ 8

8.1 Technical Specications .................8

8.2 Input and Output Resolutions.........9

8.3 Audio Specications......................10

9. Acronyms ............................................. 10

1. INTRODUCTION

The PC to HDMI Scaler is designed to upscale an analog video

signal from a PC (VGA) or HD (Component Video) source device to

digital HDMI output in a wide range of HDTV and PC resolutions up to

1080p/WUXGA (RB). Additionally this unit can also convert a digital/

analog audio signal and then simultaneously output to an HDMI,

Optical and 3.5mm Mini-jack (L/R audio) connections. This unit has

a comprehensive OSD menu that allows the user to select a variety

of output resolutions and make picture adjustments to optimize the

image quality.

2. APPLICATIONS

• Display an analog PC/HD video signal on an HDMI display

• Scale an analog PC/HD video signal to HD resolutions

• Integrate an analog PC/HD video device, such as a Laptop or non-

HDMI DVD player to an HDMI equipped display or AV receiver

3. PACKAGE CONTENTS

• 1×PC to HD Scaler

• 1×VGA Cable (15-pin D-sub to 15-pin D-sub)

• 1×Stereo Audio Cable (3.5mm to 2×RCA )

• 1×5 V/2.6 A DC Power Adaptor

• 1×Operation Manual

4. SYSTEM REQUIREMENTS

Analog video source equipment such as a non-HDMI equipped DVD

player or PC/Laptop and HDMI equipped display or switching device

such as a matrix or AV receiver.

5. FEATURES

• HDMI, HDCP and DVI compliant

• Supports a wide range of PC resolutions from VGA to WUXGA (RB)

and HD resolutions from 480i to 1080p

• Automatically detects the display settings of the connected display

and outputs the correct resolution and refresh rate when the NATIVE

output option is selected

• Supports adjustment of contrast, brightness, hue, saturation,

sharpness, RGB (color tone) level and aspect ratio size of the video

output

• Supports OSD selectable stereo analog and digital audio inputs

and simultaneous stereo analog and digital audio outputs to HDMI,

Optical digital audio and analog mini-jack connections

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

1HDMI OUTPUT: Connect to a HDMI equipped display or AV receiver

for video and audio output.

2OPTICAL OUTPUT: Connect to an amplier or active speakers with

an optical cable for LPCM 2 channels digital audio output.

3AUDIO OUTPUT: Connect to an amplier or active speakers with a

3.5mm mini-jack cable for analog audio output.

4MENU: Press this button to enter the OSD (On-screen Display) menu

and press it again to make a selection.

5Plus (+)/Minus (−): Press these buttons to:

When in the OSD menu

• Navigate up/down the OSD menu.

• To adjust the value of a menu selection.

Under normal operation (outside of OSD menu)

• Press the '-' button to perform automatic calibration of the

output signal when the input signal is from PC (VGA) only.

• Press the '+' button together with the 'MENU' button to switch the

output resolution to XGA@60 (1024×768).

• Press the '-' button together with 'MENU' button to switch the

output resolution to 720p@60.

• Press both the '+' and '-' buttons at the same time to reset the

device to the default settings.

6.2 Rear Panel

1PC INPUT: Connect to the D-sub/VGA output of a source device

such as a PC/Laptop with 15-pin D-sub cable or a DVD player with

the supplied 15-pin D-sub to 15-pin D-sub adaptor cable.

2AUDIO INPUT: Connect to the analog audio output of the source

device such as a PC/Laptop with a 3.5mm mini-jack cable.

3OPTICAL INPUT: Connect to the optical digital audio output of the

source device with an optical cable.

4SERV.: Reserved for rmware update only.

5DC 5V: Connect the 5V DC power supply to the unit and plug the

adaptor into an AC outlet.

6Power LED: This LED will illuminate once the unit is connected to an

active power supply.

6.3 OSD Menu

MAIN MENU 1ST LAYER 2ND LAYER

PICTURE

SETTING

CONTRAST 0~100 (50)

BRIGHTNESS 0~100 (50)

EXIT

FINETUNE

(PC input

only)

PHASE 0~100 (100)

CLOCK 0~100 (50)

H-POSITION 0~100 (50)

V-POSITION 0~100 (50)

EXIT

FINETUNE

(HD input

only)

HUE 0~100 (50)

SATURATION 0~100 (50)

SHARPNESS 0~100 (50)

NR OFF, LOW, MIDDLE, HIGH (OFF)

EXIT

COLOR

SETTING

RED 0~100 (50)

GREEN 0~100 (50)

BLUE 0~100 (50)

EXIT

Autres manuels pour CP-293N

Table des matières

Autres manuels CYP Convertisseur de média

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur

Expert

Expert EX-9543 Manuel utilisateur