CYP QU-18WE Manuel utilisateur

OPERATION MANUAL

QU-18WE

v1.3 HDMI 1 to 8

Mountable Splitter

QU-18WE_Manual_EN.indd 1 06/05/2011 13:29:28

Table of Contents

1. Introduction 1

2. Features 1

3. Package Contents 1

4. Operation Controls and Functions 2

4.1 Front Panel Diagram 2-3

4.2 Bottom Panel Diagram 4

5. Connection Diagram 4

6. Specications 4-5

QU-18WE_Manual_EN.indd 2 06/05/2011 13:29:42

Page 1

1. Introduction

All the PUMA, HDMI over CAT5e/6 transmitters and receivers are the perfect

solution to extend HDMI signals via CAT cabling up to 40m. For even longer

distances, use the PU-108 repeater, these can also be cascaded. The PU-1106 also

allows you to use your existing Remote Control to control your device with the

included IR Receiver & Blaster.

2. Features

• v1.3 HDMI, HDCP 1.1 and DVI 1.0 compliant.

• HDMI 1 to 8 Mountable Splitter.

• Resolutions supported: PC - VGA to UXGA; HDTV - 480i to 1080p plus

1080p24fps.

• High Denition Audio supported: Dolby TrueHD, Dolby Digital Plus and DTS-

HD Master Audio plus LPCM.

• Auto signal amplication & equalisation improves signal transmission

distances.

• Supports CEC bypass.

• Supports ‘Deep Colour’ (10 & 12 bit).

• Selectable EDID settings - TV (downstream) and STD (xed).

• System reset function switch generate a command every 10 minutes to the

connected display which resets them to the correct HDMI input.

3. Package Contents

• 1 by 8 HDMI 1.3 Splitter

• Power adaptor

• Operational Manual

QU-18WE_Manual_EN.indd 1 06/05/2011 13:29:42

Page 2

4. Operation Controls and Functions

4.1 Front Panel

1

2

5

3

4

HDMI INPUT DC 5V

1

2

3

4

5

6

7

8

QU-18W

1X8 HDMI V1.3 Splitter

HDMI OUTPUT

EDID

Power

Sys.Reset

ON

OFF

8 Bit

12 Bit

2CH

Multi CH

STD

TV

ON

OFF

1. HDMI OUTPUT 1~8: Connect your LCD TV or HD monitor with EHDMI cables.

2. EDID selection: STD/TV – By switching to STD user can select both deep colour

and audio channels function, if switching to TV the unit will read TV’s EDID and

send the image from source accordingly.

Note:

1. When in STD mode the deep colour

is suggest switching to 8 bit for longer

distant display.

QU-18WE_Manual_EN.indd 2 06/05/2011 13:29:43

Page 3

1. 2CH/Multi CH – Support 2 channels or Multi audio channels audio function This

selection is only available when EDID is in STD mode.

Note:

When Multi CH is selected TV/

display must also support Multi CH function

otherwise, TV/display will have no audio output unless, HDMI output connect

to AVR and then to TV/display. 8/12 bit – Supports 8 or 12 bit’s deep colour

function. This selection is only available when EDID is in STD mode.

Note:

When both 8 bit and 12 bit displays are connected to the HDMI output

, switch

the unit to 8 bit using the selector switch to ensure all screens display a signal.

On the other hand, if all screens are 12 bit or all 8 bit then switch the selector

switch to 12 bit or 8 bit to ensure the correct output is displayed. The splitter

cannot output 8 bit and 12 bit simultaneously, so the lesser bitrate must be

selected to ensure the displays operate correctly.

2. Sys. Reset: System reset function. It is suggest having this function switch OFF

always except when doing system reset. By switching to ON the system will

reset HDMI output to HDMI 1 within 8~10 minutes, switching to OFF means CEC

bypass.

Note:

The system reset function only

functioning when the display has built-in CEC

functionality.

3. Power & LED: Power switch On/O Red LED illuminate when power is on.

4. HDMI INPUT: Connect your source equipment with HDMI cables. 3

QU-18WE_Manual_EN.indd 3 06/05/2011 13:29:43

Page 4

2

4.1 Bottom Panel

1. DC 5V: Plug the 5VDC power supply into the unit and connect the adaptor to AC

wall outlet. Red LED will illuminate when the Power is On.

6. Connection Diagram

7. Specications

Frequency Bandwidth 2.25Gbps (single link)

Input Port 1 x HDMI Female Ports

Output Port 8 x HDMI female Ports

HDMI Output Resolution 480i~1080p, 1080p24, VGA~UXGA

QU-18WE_Manual_EN.indd 4 06/05/2011 13:29:48

Page 5

Power Supply 5VDC/3.2A (US/EU standards, CE/FCC/UL certied)

Dimensions (mm) 94mm (W) x 220mm (D) x 32mm (H)

Weight (g) 460g

Chassis Material Aluminium

Silk Skin Colour Black

Operating Temperature Operating from 0°C ~ 40°C

QU-18WE_Manual_EN.indd 5 06/05/2011 13:29:48

Notes:

QU-18WE_Manual_EN.indd 6 06/05/2011 13:29:49

www.cypeurope.com

QU-18WE_Manual_EN.indd 7 06/05/2011 13:30:02

Table des matières

Autres manuels CYP Câbles et connecteurs

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur

Chauvet DJ

Chauvet DJ Data Stream 8 Manuel utilisateur