CYP CDVI-2DDS Manuel utilisateur

CDVI-2DDS/4DDS

Dual-link DVI 1:2/1:4 Splitter

Operation Manual

DISCLAIMERS

The information in this manual has been carefully checked and

is believed to be accurate. Cypress Technology assumes no

responsibility for any infringements of patents or other rights of third

parties which may result from its use.

Cypress Technology assumes no responsibility for any inaccuracies

that may be contained in this document. Cypress also makes no

commitment to update or to keep current the information contained

in this document.

Cypress Technology reserves the right to make improvements to this

document and/or product at any time and without notice.

No part of this document may be reproduced, transmitted,

transcribed, stored in a retrieval system, or any of its part translated

into any language or computer le, in any form or by any means—

electronic, mechanical, magnetic, optical, chemical, manual, or

otherwise—without express written permission and consent from

Cypress Technology.

Version 1.1 August 2011

TRADEMARK ACKNOWLEDGMENTS

All products or service names mentioned in this document may be

trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or

operate this equipment and before connecting the power supply.

Please keep the following in mind as you unpack and install this

equipment:

• Always follow basic safety precautions to reduce the risk of re,

electrical shock and injury to persons.

• To prevent re or shock hazard, do not expose the unit to rain,

moisture or install this product near water.

• Never spill liquid of any kind on or into this product.

• Never push an object of any kind into this product through any

openings or empty slots in the unit, as you may damage parts

inside the unit.

• Do not attach the power supply cabling to building surfaces.

• Use only the supplied power supply unit (PSU). Do not use the PSU

if it is damaged.

• Do not allow anything to rest on the power cabling or allow any

weight to be placed upon it or any person walk on it.

• To protect the unit from overheating, do not block any vents or

openings in the unit housing that provide ventilation and allow for

sufcient space for air to circulate around the unit.

REVISION HISTORY

VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE

RDV1 06/10/11 Preliminary Release

RDV2 15/03/12 Add 4DDS

CONTENTS

1. Introduction................................................... 1

2. Applications.................................................. 1

3. Package Contents ....................................... 1

4. System Requirement .................................... 1

5. Features......................................................... 1

6. Operation Controls And Functions ............. 2

6.1 Front Panel ............................................... 2

6.2 Rear Panel................................................ 3

7. Connection Diagram ................................... 3

8. Specications ............................................... 4

9. Acronyms ...................................................... 5

1. INTRODUCTION

The Dual-Link DVI splitter allows a single DVI-D signal to be split into

two/four DVI outputs. Accept both Single-Link and Dual-Link DVI signal

with supporting the highest resolution of WQXGA for Dual-Link and

WUXGA@RB for Single-Link DVI this wonderful device allows users with

a multi-screen viewing.

2. APPLICATIONS

• Commercial advertising, displaying

• Lecture room display

• Showroom display

3. PACKAGE CONTENTS

• Dual-Link DVI Splitter

• 5V/2.6A or 4A DC adaptor

• Operation manual

4. SYSTEM REQUIREMENT

Input source equipments such as PC and output DVI display with DVI

cables.

5. FEATURES

• Supports video resolutions up to WQXGA with Dual-Link DVI or

WUXGA with Single-Link DVI

• Built-in adaptive equalizer provides long cable support

• Support EDID function

• Individual control of hot plug detect

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

DC 5V

POWER

LINK

Dual-Link DVI IN

Dual-Link DVI OUT

CDVI-4DDS Dual-Link DVI SPLITTER

3 4 521

1Dual-Link DVI OUT1

This slot is to connect with DVI output display with DVI cable for

synchronize outputs up to 2/4.

2Dual-Link DVI IN

This slot is to connect with the input source such as PC/Graphic

card with Dual-Link DVI cable.

3LINK LED

This LED will illuminate when the input source has send out signal

and the output display is in power on status.

4POWER LED

This LED will illuminate when the device is connected to power

adaptor with AC supply.

5DC 5V

Plug the 5V DC power supply included in the package into the unit

and connect it to AC wall outlet.

6.2 Rear Panel

Dual-Link DVI OUT Dual-Link DVI OUT Dual-Link DVI OUT

12 13 14

1 2 3

1Dual-Link DVI OUT2~4

This slot is to connect with DVI output display with DVI cable for

synchronize output with OUT 1.

Note: The device will detect OUT 1 as the primary EDID information

when both outputs are connected with active monitor. However,

when only 1 output is detected then the device will treat that as

the primary EDID information.

7. CONNECTION DIAGRAM

PC Dual-link DVI

1:2/1:4 Splitter DVI MONITOR

x2/4

8. SPECIFICATIONS

Video Bandwidth 2 x 165MHz

Input Port 1 x Dual-Link DVI

Output Ports 2 or 4 x Dual-Link DVI

I/O Support Resolution VGA ~ WQXGA@60 / Dual-Link

VGA~ WUXGA@60RB / Single-Link

ESD Protection Human body model: ± 8kV(Air-gap discharge)

± 4kV(Contact discharge)

Power Supply 5V/2.6A for 2DDS or 5V/4A for 4DDS DC

(US/EU standards, CE/FCC/UL certied)

Dimensions 125 mm (W) × 102.5 mm (D) × 30 mm (H)/2DDS

141 mm (W) × 163 mm (D) × 38 mm (H)/4DDS

Weight 288g/2DDS, 670g/4DDS

Chassis Material Metal

Silkscreen Colour Black

Operating Temperature 0 ˚C~40 ˚C / 32 ˚F~104 ˚F

Storage Temperature −20 ˚C~60 ˚C / −4 ˚F~140 ˚F

Relative Humidity 20 ~ 90% RH (non-condensing)

Power Consumption 6.8 W/2DDS, 17W/4DDS

9. ACRONYMS

ACRONYM COMPLETE TERM

DVI Digital Visual Interface

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels CYP Câbles et connecteurs

Manuels Câbles et connecteurs populaires d'autres marques

Philips

Philips SWA6310 Manuel utilisateur

StarTech.com

StarTech.com CRJ4550PK Manuel utilisateur

Nohau

Nohau EMUL-IP2K-PC Manuel utilisateur

Foxun

Foxun SX-SP144E-HD4K2K Manuel utilisateur

Philips

Philips SWA3305W Manuel utilisateur

opticis

opticis Stretch DVIM1-1P0x Manuel utilisateur

Volkswagen

Volkswagen VAS 6558A Manuel utilisateur

NEXIBO

NEXIBO N-13 Manuel utilisateur

Allen-Bradley

Allen-Bradley 1784-u2dhp Manuel utilisateur

Global Caché

Global Caché Flex Link Blaster Manuel utilisateur

Hauppauge

Hauppauge USB-Live2 Manuel utilisateur

Fenix

Fenix MPSV 15 Manuel utilisateur

BEGA

BEGA 71 085 Manuel utilisateur

Tesla

Tesla HPWC Manuel utilisateur

GAMERON

GAMERON LUXURY TV CABLE Manuel utilisateur

molex

molex Milli-Grid Dual row 87568 Series Manuel utilisateur

Burndy

Burndy Continental Industries thermOweld CRE-7 Manuel utilisateur

Chauvet DJ

Chauvet DJ Data Stream 8 Manuel utilisateur