CyberData 011588 Manuel

Dimensions

Tap Settings and Voltage Selection

Dimensions are in Inches [Millimeters]

9.93 [252.2]

5.74 [145.7]

8.66 [220]

Power Tap Settings

Voltage 1.25W 3.75W 10W 30W

25V 88.6 93.1 96.8 100.7

70V 89.3 93.7 97.4 101.9

Tap Settings Voltage Selection

To access the Voltage Selection switch and the Tap

Settings, remove the magnetically attached speaker grill.

Analog Ceiling Speaker db Output Levels*

* dBC @ 1M and 1kHz

Features

• Supports 25V, 70V or traditional 8 Ohm power input

• Multiple power tap settings for desired dB output

• Designed for good speech intelligibility

• Suitable for background music

• High efficiency speaker driver

• Easy installation

• Seismic tether bracket for additional stability

Getting Started

• This product ships in 70V mode with the power tap setting value of 1 (1.25W) selected.

• Create a plan for the locations of your speakers.

• WARNING: Do not use the 8 Ohm setting in a constant voltage application.

• WARNING: This product must be set to the appropriate voltage depending on the settings of the amplifier. Using a speaker set

to 25V in a 70V system will cause damage.

• WARNING: This enclosure is not rated for any AC voltages!

Parts

Contacting CyberData

(1) Template for Speaker*(1) Speaker Assembly

* See the last page of this document

Sales: 831-373-2601 ext. 334

Support: 831-373-2601 ext. 333

Support Website: https://support.cyberdata.net/

RMA Department Contact and Status: https://support.cyberdata.net/

Warranty Information: https://support.cyberdata.net/

Corporate Headquarters

CyberData Corporation

3 Justin Court

Monterey, CA 93940, USA

Phone: 831-373-2601

Fax: 831-373-4193

https://www.cyberdata.net/

The IP Endpoint Company

Installation Quick Reference

Analog Ceiling Speaker

25V/70V/8 Ohm

011588

Ø8.858 [Ø225]

Dimensions are in Inches [Millimeters]

Tools Required for Installation:

• (1) Sheetrock Saw or Drywall Cutter

• (1) #2 Phillips Screw Driver or Powered

Screw Driver with #2 Phillips Hex Bit

To mount the speaker:

1. Loosen the Four (4) flag nuts with a #2

Phillip Screw Driver or Powered Screw

Driver.

2. Use the TEMPLATE on the back of this

document to cut a hole in the wall* or

ceiling.

*Skip the seismic tether mounting when

mounting it to the wall.

3. Tighten the Four (4) flag nuts with a #2

Phillip Screw Driver or Powered Screw

Driver.

4. Replace the speaker grill to the speaker

housing.

Joist

Eyebolt

Ceiling Tile

Use Template or

Speaker

Seismic Tether Bracket

Assembly

Steel Wire

(Pre-Installed)

Speaker Grill

Remove Speaker Grill to

Access Flagnut Screws

Make Hole Size:

8.875 inches [225 millimeters]

on the Ceiling Tile

Phillip Drive

Screwdriver

Mounting Template Mounting Instructions

Autres manuels CyberData Intervenants

CyberData

CyberData 011121 Manuel

CyberData

CyberData 011394 SERIES Manuel utilisateur

CyberData

CyberData 011120 Manuel

CyberData

CyberData SPA-9000 Manuel utilisateur

CyberData

CyberData 11098 Manuel utilisateur

CyberData

CyberData 011201 Manuel

CyberData

CyberData 11021 Manuel utilisateur

CyberData

CyberData 010844D Manuel utilisateur

CyberData

CyberData 011401 Manuel

CyberData

CyberData 011397 Manuel utilisateur

CyberData

CyberData 011504 Manuel

CyberData

CyberData 011393 SERIES Manuel utilisateur

CyberData

CyberData 930095K Manuel utilisateur

CyberData

CyberData 011394 SERIES Manuel utilisateur

CyberData

CyberData VoIP Ceiling Speaker Manuel utilisateur

CyberData

CyberData 011216 Manuel

CyberData

CyberData 11103 Manuel utilisateur

CyberData

CyberData Syn-Apps 011522 Manuel

CyberData

CyberData 011523 Manuel

CyberData

CyberData 011402 Manuel

CyberData

CyberData 10844 Manuel utilisateur

CyberData

CyberData 011588 Manuel

CyberData

CyberData 011395 Manuel utilisateur

CyberData

CyberData 011487 Manuel

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur