Curtis 1311 Manuel utilisateur
MMAANNUUAALL
MODEL
1311
HANDHELD
PROGRAMMER
Curtis 1311 Manual
CONTENTS
1. INTRODUCTION ..................................................1
1.1 Features ............................................................1
1.2 Model Variants ................................................2
1.3 Specifications ..................................................2
2. OVERVIEW ..........................................................3
2.1 Display Screen ................................................4
2.2 Menu Navigation Key......................................4
2.3 Data Inc/Dec Key ............................................4
2.4 Bookmark Keys................................................4
3. OPERATION ..........................................................5
3.1 Menu Structure ................................................5
3.2 Main Menu ......................................................7
3.3 Interface Protocols & Backward compatibility 8
3.4 Changing a parameter ......................................8
3.5 Real Time Monitoring......................................9
3.6 Reading faults and the Diagnostic History file..10
3.7 Cloning and restoring previous programming ..11
3.8 Information Displays........................................12
3.9 Programmer Setup............................................12
page 1 Curtis 1311 Manual
INTRODUCTION
The Curtis Model 1311 Handheld Programmer simplifies pro-
gramming, testing and diagnosing Curtis Speed Controllers
and Auxiliary Devices. It provides a simple and intuitive
interface to Curtis products for testing, diagnostics and para-
meter adjustments.
1.1 Features
• Compatible with Curtis speed controllers and auxiliary
devices.
• Backward compatible to the Curtis Model 1307
Programmer.
• Intuitive and simple Menu navigation.
• Inc/dec Key for real-time adjustment of parameters.
• Read and clear diagnostic history, monitor real-time data
and perform tests.
• Menu and SubMenu structure provide a clear organization
of parameters.
• Bookmark Keys provide fast swapping between three user
selected Menus.
• Detail screens show units, min/max ranges and bar graph.
• Allows cloning of data between controllers.
• Graphic LCD can display up to seven lines of information.
• Restricted data is controlled by four access levels; OEM,
Dealer, Service and User.
• Cable options to interface with all Curtis controllers;
Molex, Conxall and RJ11.
1
page 2
Curtis 1311 Manual
1.2 Model Variants
Model 1311 Handheld Programmer is offered in four access
level models:
• 1311-1101 User programmer
(most restrictive programmer; limited view into the system
and a limited number of parameters and operations)
• 1311-2201 Service programmer
• 1311-3301 Dealer programmer
• 1311-4401 OEM programmer
(the broadest access to parameters and system values).
In order to connect the 1311 Programmer to a Curtis product,
one of three cables must be attached:
• Conxall for the 1288 and MC-2 product line
• RJ11 for the 1207 motor controller
• Molex for all other Curtis products, including 1207A
Each cable must be ordered separately.
1.3 Specifications
Operating Ambient Temperature -10°C to 50°C
Storage Temperature - 40°C to 70°C
Environmental Protection IP20
Weight 0.4 Kg
Plug the 1311 into a Curtis programmer port only. Voltages
and other interface circuits can result in permanent damage
to the programmer !
page 3 Curtis 1311 Manual
2OVERVIEW
DATA
INC/DEC
KEY
DISPLAY
SCREEN
MENU
NAVIGATION
KEY
BOOKMARK
KEYS
page 4
Curtis 1311 Manual
2.1 Display Screen
A 128 x 64 pixel graphic LCD screen capable of displaying
up to seven lines of text and graphic images simultaneously.
2.2 Menu Navigation Key
Moves the screen cursor up or down through the Menu list
(top or bottom arrow), and opens or closes Sub Menus (right
and left arrows).
2.3 Data Inc/Dec Key
Changes the value of the parameter indicated by the cursor.
2.4 Bookmark Keys
The three Bookmark Keys allow you to quickly go back to
your favorite selections without having to navigate back
through the Menu.
To set a position in the Menu, hold a Bookmark Key down for
four seconds, until the Bookmark set screen will be displayed.
To jump to a selected Bookmark position, press the appropri-
ate Bookmark Key.
The Bookmarks are not permanently stored in the 1311. They
are cleared when the programmer is unplugged.
page 5 Curtis 1311 Manual
3OPERATION
3.1 Menu Structure
After the data is uploaded from the unit (controller, charger,
etc), the Main Menu appears. This is the standard Menu
for all Curtis products and the starting point for all basic
programmer functions. If there are no entries within a
Menu, then that Menu title (Program, Monitor etc) will
not be displayed.
The Main Menu looks like this:
Program
Monitor
Faults
Functions
Information
Programmer Setup
A blinking square on the left edge indicates the position of
the cursor. You are at the top-level Menu so only one column
of boxes (cursor positions) exist. As you go deeper into the
Menu structure (using the four-directional Menu Navigation
Key) additional columns will be shown.
page 6
Curtis 1311 Manual
Entering a Main Menu (right arrow on the Menu Navigation
Key) brings up a Sub-Menu, displayed in a second column
and indented right.
Program
Max Speed 92%
Acceleration 1.2s
Monitor
Faults
Functions
Information
Programmer Setup
From the Program Menu you can go one additional SubMenu
deeper into the detail screen. Press the right arrow Menu
Navigation Key again and a screen with additional informa-
tion and bar graph will appear.
Program
Max Speed
92%
Min Max
10 100
You can back out of this screen and the Sub-Menus (there can
be more than one Sub level) by pressing the left arrow on the
Menu Navigation Key.
page 7 Curtis 1311 Manual
3.2 Main Menu
The Main Menu is the starting point for all Curtis programma-
ble products. All basic functions are readily accessed from this
point.
Program
The Program Menu may contain several Sub-Menus of parame-
ters. The unit (controller, charger, display, etc) is setup with
specific operating conditions using the 1311 handheld program-
mer in this Menu. Items like max speed, current limits, time-
outs, and modes are common parameters set in the Program
Menu.
Monitor
The Monitor contains a list of all the variables that can be read
and displayed. Common items are battery voltage, throttle posi-
tion, input status and temperature. If the list is too long, Sub-
Menus may be used to categorize them.
Faults
The Faults Menu provides the present status and access to past
fault history.
Functions
The 1311 handheld programmer can also be used to copy data
between units, reset data and many other functions unique to
the unit. The Functions Menu provides access to these.
Information
When the unit is connected to the 1311 handheld programmer,
information, such as software, hardware and parameter block
versions are also uploaded. The Information Menu provides a
quick overview.
Programmer Setup
There are several setup options and information that can be
accessed in this Menu.
page 8
Curtis 1311 Manual
3.3 Interface Protocols and
backward compatibility
Model 1311 has several protocols to communicate with other
Curtis products. It automatically detects the correct protocol
and begins the data upload immediately upon power up. (It is
critical that the correct cable is used).
Model 1311 Handheld Programmer also emulates the
communication of the 1307 handheld programmer. 1311 is
backward compatible with products like 1207, 1223 and other
products designed to communicate with model 1307. The
1307 protocol does not support Sub-Menus.
1307 backward compatibility is provided using the same
Main Menu structure as all other 1311 protocols. The 1307
had special Keys labeled PROGRAM, TEST and DIAGNOS-
TICS, which are accessed under the Program, Monitor and
Faults 1311 Menus. The 1307 MORE INFO is similar to the
1311 detail screen and Functions Menu. Changing the data
and scrolling through the list is similar between the 1311 and
the 1307.
3.4 Changing a parameter
Many Curtis products allow customization to meet designer
or user preferences. The parameters that are made available to
the OEM, dealer, service technician or end-user, are con-
trolled by the 1311 access level (see section 1.3 Model vari-
ants). Not every parameter is visible to every user.
When the 1311 is connected to a Curtis product, a parameter
list (block) is uploaded to the programmer along with the pre-
sent settings. You can easily scroll through this list and
change the settings and quickly test the results. To access a
parameter, use the Menu Navigation Key to select
'Program'
Sub-Menus organize the parameter list. Scroll though the list
and press the right arrow on the Menu Navigation Key to
enter the Sub-Menu.
Table des matières
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
